EN 10218-2:1996
(Main)Steel wire and wire products - General - Part 2: Wire dimensions and tolerances
Steel wire and wire products - General - Part 2: Wire dimensions and tolerances
This Part of this European Standard specifies the tolerances on diameter of round wire and, where applicable, on the length of round wire cut to length, for bright steel wire (i.e. uncoated), metallic coated steel wire and non-metallic coated steel wire. This standard should not be applied where other requirements for dimensions and tolerances are specified in a particular product standard.
Stahldraht und Drahterzeugnisse - Allgemeines - Teil 2: Drahtmaße und Toleranzen
Dieser Teil dieser Europäischen Norm legt die Grenzabmaße fest für den Durchmesser von rundem Draht und, soweit zutreffend, für die Länge von zu Stäben geschnittenem runden Draht, und zwar für blanken Stahldraht (d. h. ohne Überzug), für Stahldraht mit metallischem Überzug und für Stahldraht mit nichtmetallischem Überzug. Diese Norm sollte nicht angewendet werden, wenn in einer besonderen Erzeugnisnorm andere Anforderungen für Maße und Grenzabmaße festgelegt sind.
Fils et produits tréfilés en acier - Généralités - Partie 2: Dimensions et tolérances des fils
La présente partie de la norme spécifie pour les fils en acier blanc (c'est- à-dire non revêtus), les fils en acier à revêtement métallique et les fils en acier à revêtement non métallique, les tolérances sur le diamètre des fils de section circulaire et, le cas échéant, les tolérances de longueur des fils de section circulaire coupés à la longueur. La présente norme n'est pas applicable lorsqu'une norme spécifique de produit définit d'autres exigences relatives aux dimensions et aux tolérances
Jeklena žica in žični izdelki - Splošno - 2. del: Mere žic in tolerance
General Information
- Status
- Withdrawn
- Publication Date
- 18-Jun-1996
- Withdrawal Date
- 10-Jan-2012
- Technical Committee
- ECISS/TC 106 - Wire rod and wires
- Drafting Committee
- ECISS/TC 30 - Steel wires
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 11-Jan-2012
- Completion Date
- 11-Jan-2012
Relations
- Replaced By
EN 10218-2:2012 - Steel wire and wire products - General - Part 2: Wire dimensions and tolerances - Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
EN 10218-2:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Steel wire and wire products - General - Part 2: Wire dimensions and tolerances". This standard covers: This Part of this European Standard specifies the tolerances on diameter of round wire and, where applicable, on the length of round wire cut to length, for bright steel wire (i.e. uncoated), metallic coated steel wire and non-metallic coated steel wire. This standard should not be applied where other requirements for dimensions and tolerances are specified in a particular product standard.
This Part of this European Standard specifies the tolerances on diameter of round wire and, where applicable, on the length of round wire cut to length, for bright steel wire (i.e. uncoated), metallic coated steel wire and non-metallic coated steel wire. This standard should not be applied where other requirements for dimensions and tolerances are specified in a particular product standard.
EN 10218-2:1996 is classified under the following ICS (International Classification for Standards) categories: 77.140.65 - Steel wire, wire ropes and link chains. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10218-2:1996 has the following relationships with other standards: It is inter standard links to EN 10218-2:2012, EN 10257-2:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10218-2:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HUDQFHStahldraht und Drahterzeugnisse - Allgemeines - Teil 2: Drahtmaße und ToleranzenFils et produits tréfilés en acier - Généralités - Partie 2: Dimensions et tolérances des filsSteel wire and wire products - General - Part 2: Wire dimensions and tolerances77.140.65Jeklene žice, jeklene vrvi in verig
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...