EN 13445-2:2002
(Main)Unfired pressure vessels - Part 2: Materials
Unfired pressure vessels - Part 2: Materials
This document specifies the requirements for materials (including clad materials) for unfired pressure vessels and supports which are covered by EN 13445-1 and manufactured from metallic materials; it is currently limited to steels with sufficient ductility. This document is not applicable in the creep range.
NOTE Other materials will be added later by amendments.
It specifies the requirements for the selection, inspection, testing and marking of metallic materials for the fabrication of unfired pressure vessels.
This document does not give provisions for material requirements and material selection for vessels designed using Design by Analysis - Direct Route (DBA) of Annex B of EN 13445-3:2002.
Unbefeuerte Druckbehälter - Teil 2: Werkstoffe
Dieser Teil dieser Europäischen Norm legt die Anforderungen an Werkstoffe (einschließlich Plattierungswerkstoffe) für unbefeuerte Druckbehälter nach EN 13445-1 aus metallischen Werkstoffen fest; die Norm ist zur Zeit auf Stähle mit ausreichender Duktilität begrenzt. Dieser Teil dieser Europäischen Norm gilt nicht im Zeitstandbereich.
ANMERKUNG Weitere Werkstoffe werden in späteren Ergänzungen aufgenommen.
Dieser Teil dieser Europäischen Norm legt die Anforderungen für die Auswahl, Inspektion, Prüfung und Kennzeichnung von metallischen Werkstoffen für die Herstellung von unbefeuerten Druckbehältern fest.
Récipients sous pression non soumis à la flamme - Partie 2: Matériaux
La présente partie 2 de la Norme EN 13445 spécifie les prescriptions relatives aux matériaux (y compris les matériaux plaqués) destinés aux récipients sous pression non soumis à la flamme et aux supports, couverts par l'EN 13445-1, fabriqués à partir de matériaux métalliques ; elle est limitée actuellement aux aciers ayant une ductilité suffisante. La présente partie 2 ne s'applique pas dans le domaine du fluage.
NOTE D'autres matériaux seront ajoutés ultérieurement par amendement.
Elle spécifie les prescriptions relatives à la sélection, l'inspection, les essais et le marquage des matériaux métalliques pour la fabrication des récipients sous pression non soumis à la flamme.
La présente partie ne donne pas de dispositions relatives aux prescriptions de fabrication des récipients conçus en utilisant la conception par l'analyse - Route directe de l'annexe B de l'EN 13445-3:2002.
Neogrevane tlačne posode - 2. del: Materiali
General Information
- Status
- Withdrawn
- Publication Date
- 28-May-2002
- Withdrawal Date
- 21-Jul-2009
- Technical Committee
- CEN/TC 54 - Unfired pressure vessels
- Drafting Committee
- CEN/TC 54/WG 52 - B - Material selection
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 22-Jul-2009
- Completion Date
- 22-Jul-2009
Relations
- Effective Date
- 25-Jul-2009
- Referred By
EN 12284:2003 - Refrigerating systems and heat pumps - Valves - Requirements, testing and marking - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Referred By
EN 13831:2007 - Closed expansion vessels with built in diaphragm for installation in water - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
EN 13445-2:2002 is a standard published by the European Committee for Standardization (CEN). Its full title is "Unfired pressure vessels - Part 2: Materials". This standard covers: This document specifies the requirements for materials (including clad materials) for unfired pressure vessels and supports which are covered by EN 13445-1 and manufactured from metallic materials; it is currently limited to steels with sufficient ductility. This document is not applicable in the creep range. NOTE Other materials will be added later by amendments. It specifies the requirements for the selection, inspection, testing and marking of metallic materials for the fabrication of unfired pressure vessels. This document does not give provisions for material requirements and material selection for vessels designed using Design by Analysis - Direct Route (DBA) of Annex B of EN 13445-3:2002.
This document specifies the requirements for materials (including clad materials) for unfired pressure vessels and supports which are covered by EN 13445-1 and manufactured from metallic materials; it is currently limited to steels with sufficient ductility. This document is not applicable in the creep range. NOTE Other materials will be added later by amendments. It specifies the requirements for the selection, inspection, testing and marking of metallic materials for the fabrication of unfired pressure vessels. This document does not give provisions for material requirements and material selection for vessels designed using Design by Analysis - Direct Route (DBA) of Annex B of EN 13445-3:2002.
EN 13445-2:2002 is classified under the following ICS (International Classification for Standards) categories: 23.020.30 - Pressure vessels, gas cylinders. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13445-2:2002 has the following relationships with other standards: It is inter standard links to EN 13445-2:2009, EN 12284:2003, EN 14222:2003, EN 14359:2006+A1:2010, EN 13831:2007, EN 14917:2009+A1:2012, EN 764-4:2002, EN 12693:2008, EN 378-2:2008+A2:2012, EN 13445-2:2002/A2:2006, EN 13445-2:2002/A3:2009, EN 13445-2:2002/A5:2009, EN 13445-2:2002/A1:2007, EN 13445-2:2002/prA4; is excused to EN 13445-1:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13445-2:2002 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13445-2:2002 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2002
1HRJUHYDQHWODþQHSRVRGHGHO 0DWHULDOL
Unfired pressure vessels - Part 2: Materials
Unbefeuerte Druckbehälter - Teil 2: Werkstoffe
Récipients sous pression non soumis a la flamme - Partie 2: Matéri
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...