EN 115:1995
(Main)Safety rules for the construction and installation of escalators and passenger conveyors
Safety rules for the construction and installation of escalators and passenger conveyors
1.1 This standard is applicable for all new escalators and passenger conveyors (pallet or belt type). 1.2 Existing escalators and passenger conveyors are not subject to this standard. It is, however, recommended that they be adapted to this standard. 1.3 If some dimensions of this standard cannot be kept due to structural conditions in existing buildings, it has to be defined in the individual case which alternative measures are necessary. Note: In addition see 0.5 and 0.6
Sicherheitsregeln für die Konstruktion und den Einbau von Fahrtreppen und Fahrsteigen
Diese Norm gilt für alle neu zu errichtenden Fahrtreppen und Fahrsteige (Paletten- oder Gurtkonstruktion). Bestehende Fahrtreppen und Fahrsteige unterliegen nicht dieser Norm. Es wird jedoch empfohlen, sie dieser Norm anzupassen. Können durch bauliche Gegebenheiten bei bestehenden Gebäuden einige Maße dieser Norm nicht eingehalten werden, so ist im Einzelfall festzulegen, welche Ersatzmaßnahmen erforderlich sind.
Règles de sécurité pour la construction et l'installation des escaliers mécaniques et trottoirs roulants
La présente norme s'applique à toute nouvelle installation d'escaliers mécaniques et de trottoirs roulants (à plateaux ou à bande). Les escaliers mécaniques et les trottoirs roulants existants ne sont pas soumis à la présente norme. Il est toutefois recommandé qu'ils soient adaptés à celle-ci. Si certaines dimensions indiquées dans cette norme ne peuvent être respectées en raison des conditions de structure des bâtiments existants, il doit être défini, cas par cas, les mesures de remplacement nécessaires.
Varnostna pravila za konstruiranje in vgradnjo tekočih stopnic in trakov za osebe
General Information
- Status
- Withdrawn
- Publication Date
- 17-Jan-1995
- Withdrawal Date
- 29-Jul-2008
- Technical Committee
- CEN/TC 10 - Passenger, goods and service lifts
- Drafting Committee
- CEN/TC 10/WG 2 - Escalators and passenger conveyors
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 30-Jul-2008
- Completion Date
- 30-Jul-2008
- Directive
- 89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
- Directive
- 98/37/EC - Machinery
Relations
- Replaced By
EN 115-1:2008 - Safety of escalators and moving walks - Part 1: Construction and installation - Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Building products evaluation and certification.
QAI Laboratories
Building and construction product testing and certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
EN 115:1995 is a standard published by the European Committee for Standardization (CEN). Its full title is "Safety rules for the construction and installation of escalators and passenger conveyors". This standard covers: 1.1 This standard is applicable for all new escalators and passenger conveyors (pallet or belt type). 1.2 Existing escalators and passenger conveyors are not subject to this standard. It is, however, recommended that they be adapted to this standard. 1.3 If some dimensions of this standard cannot be kept due to structural conditions in existing buildings, it has to be defined in the individual case which alternative measures are necessary. Note: In addition see 0.5 and 0.6
1.1 This standard is applicable for all new escalators and passenger conveyors (pallet or belt type). 1.2 Existing escalators and passenger conveyors are not subject to this standard. It is, however, recommended that they be adapted to this standard. 1.3 If some dimensions of this standard cannot be kept due to structural conditions in existing buildings, it has to be defined in the individual case which alternative measures are necessary. Note: In addition see 0.5 and 0.6
EN 115:1995 is classified under the following ICS (International Classification for Standards) categories: 91.140.90 - Lifts. Escalators. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 115:1995 has the following relationships with other standards: It is inter standard links to EN 115-1:2008, CEN/TR 115-3:2009, EN 1929-2:2004, EN 115:1995/A2:2004, EN 115:1995/A1:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 115:1995 is associated with the following European legislation: EU Directives/Regulations: 89/392/EEC, 98/37/EC; Standardization Mandates: M/BC/CEN/88/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 115:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheitsregeln für die Konstruktion und den Einbau von Fahrtreppen und FahrsteigenRegles de sécurité pour la construction et l'installation des escaliers mécaniques et trottoirs roulantsSafety rules for the construction and installation of escalators and passenger conveyors91.140.90Lifts. EscalatorsICS:Ta slovenski standard je istoveten z:EN 115:1995SIST EN 115:1997en01-avgust-1997SIST EN 115:1997SLOVENSKI
STANDARD
S
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...