EN 10120:1996
(Main)Steel sheet and strip for welded gas cylinders
Steel sheet and strip for welded gas cylinders
1.1 This European Standard spec4f ies requirements for hot-rol-led sheet and strip up to 5 mm thickness made of steels listed in table 1 and intended for manufacturing welded gas cylinders. 1.2 The general technical delivery conditions in EN 10021 also apply to products supplied in accordance with this European Standard. 1.3 This European Standard does not apply to sheet and strip made of: - general structural steels (see EN 10025); - non-alloy and alloy steels for pressure vessels (see EN 10028-1 to 10028-6); - low carbon non-alloy steels for cold forming (see EN 10111 and EN 10130); - steels with a high yield strength for cold forming (see EN 10149); - cold-rolled strip up to 600 mm wide of low carbon non-alloy steels (see EN 10139); - steels for simple pressures vessels (see EN 10207).
Stahlblech und -band für geschweißte Gasflaschen
1.1 Diese Europäische Norm legt die Anforderungen an warmgewalztes Blech und Band bis 5 mm Dicke aus tiefziehfähigen Stählen nach Tabelle 1 fest. 1.2 Für nach dieser Europäischen Norm gelieferte Erzeugnisse gelten zusätzlich die allgemeinen technischen Lieferbedingungen nach EN 10021.
Tôles et bandes pour bouteilles à gaz soudées en acier
1.1 La présente norme européenne définit les prescriptions concernant les tôleset bandes laminées à chaud d'épaisseur inférieure ou égale à 5 mm en acier apte à l'emboutissage profond, telles qu'énumérées au tableau 1. 1.2 Les conditions générales techniques de livraison de l'EN 10021 s'appliquent également aux produits fournis en conformité avec la présente norme européenne.
Jeklene pločevine in trakovi za plinske jeklenke
General Information
- Status
- Withdrawn
- Publication Date
- 10-Dec-1996
- Withdrawal Date
- 02-Sep-2008
- Technical Committee
- ECISS/TC 107 - Steels for pressure purposes
- Drafting Committee
- ECISS/TC 22 - Steels for pressure purposes - Qualities
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 03-Sep-2008
- Completion Date
- 03-Sep-2008
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10120:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Steel sheet and strip for welded gas cylinders". This standard covers: 1.1 This European Standard spec4f ies requirements for hot-rol-led sheet and strip up to 5 mm thickness made of steels listed in table 1 and intended for manufacturing welded gas cylinders. 1.2 The general technical delivery conditions in EN 10021 also apply to products supplied in accordance with this European Standard. 1.3 This European Standard does not apply to sheet and strip made of: - general structural steels (see EN 10025); - non-alloy and alloy steels for pressure vessels (see EN 10028-1 to 10028-6); - low carbon non-alloy steels for cold forming (see EN 10111 and EN 10130); - steels with a high yield strength for cold forming (see EN 10149); - cold-rolled strip up to 600 mm wide of low carbon non-alloy steels (see EN 10139); - steels for simple pressures vessels (see EN 10207).
1.1 This European Standard spec4f ies requirements for hot-rol-led sheet and strip up to 5 mm thickness made of steels listed in table 1 and intended for manufacturing welded gas cylinders. 1.2 The general technical delivery conditions in EN 10021 also apply to products supplied in accordance with this European Standard. 1.3 This European Standard does not apply to sheet and strip made of: - general structural steels (see EN 10025); - non-alloy and alloy steels for pressure vessels (see EN 10028-1 to 10028-6); - low carbon non-alloy steels for cold forming (see EN 10111 and EN 10130); - steels with a high yield strength for cold forming (see EN 10149); - cold-rolled strip up to 600 mm wide of low carbon non-alloy steels (see EN 10139); - steels for simple pressures vessels (see EN 10207).
EN 10120:1996 is classified under the following ICS (International Classification for Standards) categories: 77.140.50 - Flat steel products and semi-products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10120:1996 has the following relationships with other standards: It is inter standard links to EN 10120:2008, CR 10313:2000, EN 14785:2006, EN 12815:2001, EN 12809:2001, EN 13240:2001, EN 13229:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10120:1996 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10120:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahlblech und -band für geschweißte GasflaschenTôles et bandes pour bouteilles a gaz soudées en acierSteel sheet and strip for welded gas cylinders77.140.50SROL]GHONLFlat steel products and semi-productsICS:Ta slovenski standard je istoveten z:EN 10120:1996SIST EN 10120:1997en01-decemb
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...