EN 45545-3:2013

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bahnanwendungen - Brandschutz in Schienenfahrzeugen - Teil 3: Feuerwiderstand von FeuerschutzabschlüssenApplications ferroviaires - Protection contre les incendies dans les véhicules ferroviaires - Partie 3: Exigences de résistance au feu des barrières au feuRailway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers45.060.01Železniška vozila na splošnoRailway rolling stock in general13.220.20Fire protectionICS:Ta slovenski standard je istoveten z:EN 45545-3:2013SIST EN 45545-3:2013en,fr01-maj-2013SIST EN 45545-3:2013SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 45545-3
March 2013 ICS 45.060.01; 13.220.20 Supersedes CEN/TS 45545-3:2009
English Version
Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
Applications ferroviaires - Protection contre les incendies dans les véhicules ferroviaires - Partie 3: Exigences de résistance au feu des barrières au feu
Bahnanwendungen - Brandschutz in Schienenfahrzeugen - Teil 3: Feuerwiderstand von Feuerschutzabschlüssen This European Standard was approved by CEN on 7 December 2012.
CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels © 2013 CEN/CENELEC All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for CENELEC Members. Ref. No. EN 45545-3:2013 E SIST EN 45545-3:2013

Requirements for mounting and fixing of test specimens . 17 A.1 General . 17 A.2 Terms and definitions . 17 A.3 Product parameters and end-use application parameters . 18 A.4 Restraint and boundary conditions. 18 A.5 Size of test specimen . 18 A.6 Number of test specimens . 19 A.7 Construction of test specimens and verification . 19 A.8 Installation of test specimen . 19 A.9 Conditioning of test specimen . 19 A.10 Joint construction . 19 Annex ZA (informative)
Relationship between this European standard and the Essential Requirements of EU Directive 2008/57/EC . 20 Bibliography . 23
1 Scope This part of EN 45545 specifies the fire resistance requirements and testing methods for fire barriers for railway vehicles. The objective of the measures and requirements, specified in this part of EN 45545, is to protect passengers and staff in railway vehicles in the event of a developing fire on board. It is not within the scope of this part of EN 45545 to describe measures that ensure the preservation of the railway vehicles in the event of a fire. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1363-1:2012, Fire resistance tests — Part 1: General requirements EN 1364-1, Fire resistance tests for non-loadbearing elements — Part 1: Walls EN 1364-2, Fire resistance tests for non-loadbearing elements — Part 2: Ceilings EN 1634-1, Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware — Part 1: Fire resistance tests for doors, shutters and openable windows EN 13501-2, Fire classification of construction products and building elements — Part 2: Classification using data from fire resistance tests, excluding ventilation services EN 45545-1:2013, Railway applications — Fire protection on railway vehicles — Part 1: General EN 45545-5, Railway applications — Fire protection on railway vehicles — Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles EN ISO 1182, Reaction to fire tests for products — Non-combustibility test (ISO 1182) EN ISO 1716, Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value) (ISO 1716) EN ISO 13943:2010, Fire safety — Vocabulary (ISO 13943:2008) ISO 834-1, Fire-resistance tests — Elements of building construction — Part 1: General requirements 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 45545-1:2013 apply. 4 Application of fire barriers Railway vehicles shall be equipped with fire barriers at the locations specified in Table 1. SIST EN 45545-3:2013
...