EN ISO 23581:2024
(Main)Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscometer (ISO 23581:2024)
Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscometer (ISO 23581:2024)
This document specifies a procedure for the determination of kinematic viscosity, ν, by calculation from dynamic viscosity, η, and density, ρ, of both transparent and opaque liquid petroleum products and crude oils using the Stabinger type viscometer.
The result obtained using the procedure described in this document depends on the rheological behaviour of the sample. This document is predominantly applicable to liquids whose shear stress and shear rate are proportional (Newtonian flow behaviour). If the viscosity changes significantly with the shear rate, comparison with other measuring methods is not possible except at similar shear rates.
The precision has been determined only for the materials, density ranges and temperatures described in Clause 13. The test method can be applied to a wider range of viscosity, density, temperature and materials. It is possible that the precision and bias are applicable for materials which are not listed in Clause 13.
Mineralölerzeugnisse und verwandte Produkte - Bestimmung der dynamischen Viskosität und Berechnung der kinematischen Viskosität - Verfahren mit dem Viskosimeter nach dem Stabinger-Prinzip (ISO 23581:2024)
Dieses Dokument legt ein Verfahren fest, in dem die kinematische Viskosität (ν) von sowohl durchsichtigen als auch undurchsichtigen flüssigen Mineralölerzeugnissen und Mineralölen unter Verwendung eines Viskosimeters nach dem Stabinger-Prinzip bestimmt wird, die kinematische Viskosität wird dabei durch Berechnung aus der dynamischen Viskosität (η) und der Dichte (ρ) ermittelt.
Das unter Anwendung des in diesem Dokument beschriebenen Verfahrens erzielte Ergebnis ist vom Fließverhalten der Probe abhängig. Dieses Dokument ist hauptsächlich auf Flüssigkeiten anwendbar, deren Schubspannung und Schergeschwindigkeit proportional sind (Newtonsches Fließverhalten). Ändert sich die Viskosität signifikant mit der Schergeschwindigkeit, ist der Vergleich mit anderen Messverfahren nicht möglich mit Ausnahme bei ähnlichen Schergeschwindigkeiten.
Die Präzision wurde nur für die in Abschnitt 13 beschriebenen Materialien, Dichtebereiche und Temperaturen bestimmt. Das Prüfverfahren kann auf einen breiteren Bereich von Viskosität, Dichte, Temperatur und Materialien angewendet werden. Es ist möglich, dass die Präzision und die systematische Abweichung auf Materialien anwendbar sind, die nicht in Abschnitt 13 aufgeführt sind.
WARNUNG — Die Anwendung dieses Dokuments kann die Anwendung gefährlicher Stoffe, Arbeitsgänge und Geräte mit sich bringen. Dieses Dokument beansprucht nicht, alle damit verbundenen Sicherheitsprobleme zu behandeln. Es liegt in der Verantwortung des Anwenders dieses Dokuments, vor der Anwendung dieses Dokuments geeignete Maßnahmen für die Sicherheit und den Gesundheitsschutz des Personals zu ergreifen, und die Geltung weiterer diesbezüglicher Auflagen zu prüfen.
Produits pétroliers et produits connexes - Détermination de la viscosité cinématique - Méthode par viscosimètre type Stabinger (ISO 23581:2024)
Le présent document spécifie une méthode de détermination de la viscosité cinématique, ν, par calcul à partir de la viscosité dynamique, η, et de la masse volumique, ρ, des produits pétroliers liquides transparents et opaques et des huiles brutes à l'aide du viscosimètre de type Stabinger.
Le résultat obtenu en utilisant la méthode décrite dans le présent document dépend du comportement rhéologique de l'échantillon. Ce document s'applique principalement à des liquides dont la contrainte de cisaillement et le taux de cisaillement sont proportionnels (comportement d'écoulement newtonien). Cependant, si la viscosité varie de manière significative avec le taux de cisaillement, une comparaison avec d'autres méthodes de mesure n'est pertinente qu'à des taux de cisaillement similaires.
La fidélité a été déterminée pour les produits, les gammes de masse volumique et de température décrites à l'Article 13. La méthode d'essai peut être appliquée à une gamme plus large de viscosité, de masse volumique, de température et de produits. Il est possible que la fidélité et le biais puissent être applicables à des produits qui ne figurent pas à l’Article 13.
Naftni in sorodni proizvodi - Določanje kinematične viskoznosti - Metoda z viskozimetrom po Stabingerju (ISO 23581:2024)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 23581:2024
01-julij-2024
Naftni in sorodni proizvodi - Določanje kinematične viskoznosti - Metoda z
viskozimetrom po Stabingerju (ISO 23581:2024)
Petroleum products and related products - Determination of kinematic viscosity - Method
by Stabinger type viscometer (ISO 23581:2024)
Mineralölerzeugnisse und verwandte Produkte - Bestimmung der dynamischen
Viskosität und Berechnung der kinematischen Viskosität - Verfahren mit dem
Viskosimeter nach dem Stabinger-Prinzip (ISO 23581:2024)
Produits pétroliers et produits connexes - Détermination de la viscosité cinématique -
Méthode par viscosimètre type Stabinger (ISO 23581:2024)
Ta slovenski standard je istoveten z: EN ISO 23581:2024
ICS:
75.080 Naftni proizvodi na splošno Petroleum products in
general
SIST EN ISO 23581:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 23581:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 23581:2024
EN ISO 23581
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2024
EUROPÄISCHE NORM
ICS 75.080
English Version
Petroleum products and related products - Determination
of kinematic viscosity - Method by Stabinger type
viscometer (ISO 23581:2024)
Produits pétroliers et produits connexes - Mineralölerzeugnisse und verwandte Produkte -
Détermination de la viscosité cinématique - Méthode Bestimmung der dynamischen Viskosität und
par viscosimètre type Stabinger (ISO 23581:2024) Berechnung der kinematischen Viskosität - Verfahren
mit dem Viskosimeter nach dem Stabinger-Prinzip (ISO
23581:2024)
This European Standard was approved by CEN on 12 May 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 23581:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 23581:2024
EN ISO 23581:2024 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 23581:2024
EN ISO 23581:2024 (E)
European foreword
This document (EN ISO 23581:2024) has been prepared by Technical Committee ISO/TC 28 "Petroleum
and related products, fuels and lubricants from natural or synthetic sources" in collaboration with
Technical Committee CEN/TC 19 “Gaseous and liquid fuels, lubricants and related products of
petroleum, synthetic and biological origin” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2024, and conflicting national standards
shall be withdrawn at the latest by November 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norwa
...
SLOVENSKI STANDARD
oSIST prEN ISO 23581:2023
01-julij-2023
Naftni in sorodni proizvodi - Določanje kinematične viskoznosti - Metoda po
Stabingerjevem viskozimetru (ISO/DIS 23581:2023)
Petroleum products and related products - Determination of kinematic viscosity - Method
by Stabinger type viscometer (ISO/DIS 23581:2023)
Mineralölerzeugnisse und verwandte Produkte - Bestimmung der dynamischen
Viskosität und Berechnung der kinematischen Viskosität - Verfahren mit dem
Viskosimeter nach dem Stabinger-Prinzip (ISO/DIS 23581:2023)
Produits pétroliers et produits connexes - Détermination de la viscosité cinématique -
Méthode par viscosimètre type Stabinger (ISO/DIS 23581:2023)
Ta slovenski standard je istoveten z: prEN ISO 23581
ICS:
75.080 Naftni proizvodi na splošno Petroleum products in
general
oSIST prEN ISO 23581:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 23581:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 23581:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 23581
ISO/TC 28 Secretariat: NEN
Voting begins on: Voting terminates on:
2023-04-26 2023-07-19
Petroleum products and related products —
Determination of kinematic viscosity — Method by
Stabinger type viscometer
ICS: 75.080
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 23581:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 23581:2023
ISO/DIS 23581:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 23581
ISO/TC 28 Secretariat: NEN
Voting begins on: Voting terminates on:
2023-04-26 2023-07-19
Petroleum products and related products - Determination
of kinematic viscosity - Method by Stabinger type
viscometer
ICS: 75.080
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 23581:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 23581:2023
ISO 23581:2020(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.