EN 9223-100:2018

SLOVENSKI STANDARD
01-maj-2018
9RGHQMHSURJUDPRY9RGHQMHNRQILJXUDFLMHGHO9RGLOR]DXSRUDERQDþHO
XSUDYOMDQMDNRQILJXUDFLMH
Programme Management - Configuration Management - Part 100: A guide for the
application of the principles of configuration management
Programm-Management - Konfigurationsmanagement -Teil 100: Anwendungsanleitung
für die Grundsätze des Konfigurationsmanagement
Management de Programme - Gestion de la Configuration - Partie 100 : Guide pour la
mise en oeuvre des principes de la gestion de la configuration
Ta slovenski standard je istoveten z: EN 9223-100:2018
ICS:
03.100.70 Sistemi vodenja Management systems
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 9223-100
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2018
EUROPÄISCHE NORM
ICS 35.080; 49.020
English Version
Programme Management - Configuration Management -
Part 100: A guide for the application of the principles of
configuration management
Management de Programme - Gestion de la Programm-Management - Konfigurationsmanagement
Configuration - Partie 100 : Guide pour la mise en -Teil 100: Anwendungsanleitung für die Grundsätze
œuvre des principes de la gestion de la configuration des Konfigurationsmanagement
This European Standard was approved by CEN on 25 September 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 9223-100:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Configuration management: basic concepts . 6
4.1 “Programme” and “company” viewpoints . 6
4.2 Objectives, services and interfaces with other disciplines . 7
4.2.1 Objectives . 7
4.2.2 Services to be provided . 7
4.2.3 Input from/Output towards other disciplines. 8
4.3 Configuration management processes . 9
5 Configuration management as part of programme management . 10
5.1 Configuration baselines . 10
5.1.1 Main configuration baselines . 10
5.1.2 Functional configuration baseline . 10
5.1.3 Allocated configuration baseline . 10
5.1.4 Product Configuration baseline . 10
5.1.5 Other configurations status . 11
5.2 Configuration management and associated responsibilities . 11
5.2.1 Principle . 11
5.2.2 Configuration item - Configuration data . 11
5.2.3 Configuration items designated by the customer . 11
5.2.4 Configuration management authority and configuration management board . 12
5.2.5 Other authorities involved in configuration related decisions . 13
5.3 Configuration management, during the life cycle processes. 13
5.3.1 General . 13
5.3.2 Configuration Management, during the expression of need . 13
5.3.3 Configuration Management during the preliminary design process . 13
5.3.4 Configuration management, during the detailed design process . 13
5.3.5 Configuration management, during the qualification process . 14
5.3.6 Configuration management during the industrialisation and production processes . 14
5.3.7 Configuration management, during the utilisation process . 15
5.3.8 Configuration management, during the disposal process . 15
5.3.9 Particular cases . 16
5.4 Quality audit of the configuration management system . 16
6 Configuration management processes . 16
6.1 Configuration identification . 16
6.2 Configuration control . 17
6.3 Configuration status accounting . 19
6.4 Configuration verifications, reviews and audits . 20
7 Management specification and configuration management plan . 20
7.1 General . 20
7.2 Configuration management requirements . 21
7.3 Configuration management plan . 21
(informative) List of the main tasks of configuration management . 23
(informative) Summary of a configuration management plan (Example) . 29
(informative) Cartography of standards generally used by configuration
management people . 31
Bibliography . 32

European foreword
This document (EN 9223-100:2018) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2018, and conflicting national standards
shall be withdrawn at the latest by September 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
1 Scope
The present document:
 is based on internationally-recognized concepts;
 proposes organisational principles and implementation processes for configuration management
from both viewpoints: “programme” and “company”, with emphasis on the “programme”
viewpoint.
The required procedures for implementation and necessary tailoring have to be prescribed for each
programme.
This document encompasses some aspects of the relationship between configuration management and
contract management, but does not address contract management procedures.
Intended for use in complex programmes (aerospace, defence, etc.), this document is an extension of
standard ISO 10007 Quality management systems — Guidelines for configuration management.
This document is coherent with EN 9200 Programme management — Guidelines for project
management specifications.
The described principles concern all the stakeholders in the programme (authorities, manufacturers,
skills, etc.) from the feasibility phase to disposal. These principles can be applied or tailored to any
products (material or software).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
Applicable standards may change according to the related skills (mechanical, chemical and software,
etc. or according to the different domains (Defence, Space, Aircraft, etc.)
EN 9223-101, Programme Management — Configuration Management — Part 101: Configuration
1)
identification
EN 9223-102, Programme Management — Configuration Management — Part 102: Configuration status
1)
accounting
EN 9223-103, Programme Management — Configuration Management — Part 103: Configuration
1)
Verifications, Reviews and Audits
EN 9223-104, Programme Management — Configuration Management — Part 104: Configuration
1)
Control
1)
EN 9223-105, Programme Management — Configuration Management — Part 105: Glossary
EN 9100, Quality Management Systems — Requirements for Aviation, Space and Defence organizations

1) Published as ASD-STAN Prestandard at the date of publication of this standard http://www.asd-stan.org/.
EN ISO 9000, Quality management systems — Fundamentals and vocabulary
EN ISO 9001, Quality management systems — Requirements
ISO 10007:2003, Quality management systems — Guidelines for configuration management
NOTE A list of publications is given in the bibliography. A table summarizes the relationships of the main
documents dealing with configuration management identified at the time this document was published.
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 9223-105 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at htt
...