EN 1550:1997
(Main)Machine-tools safety - Safety requirements for the design and construction of work holding chucks
Machine-tools safety - Safety requirements for the design and construction of work holding chucks
This European Standard sets out the requirements and/or measures to remove the hazards and limit the risk on work holding chucks which are defined in 3.1. This European standard covers all the hazards relevant to this component. These hazards are listed in clause 4. The requirements of this standard concern designers, manufacturers, suppliers and importers of work holding chucks. This standard also includes information which the manufacturer shall provide for the user. This standard is primarily directed to components which are manufactured after the date of issue of this standard.
Sicherheit von Werkzeugmaschinen - Sicherheitsanforderungen für die Gestaltung und Konstruktion von Spannfuttern für die Werkstückaufnahme
Diese Europäische Norm legt Anforderungen und/oder Massnahmen zur Beseitigung von Gefährdungen und zur Eingrenzung von Risiken bei Futtern für die Werk- stückaufnahme fest, die in 3.1 definiert sind. Diese Norm umfasst alle Gefähr-dungen, die sich auf dieses Bauteil beziehen. Diese Gefährdungen sind in 4 aufgeführt. Die Anforderungen in dieser Norm betreffen Konstrukteure, Herstel- ler, Lieferante und Importeure von Futtern für die Werkstückaufnahme.
Sécurité des machines-outils - Prescriptions de sécurité pour la conception et la construction des mandrins porte-pièces
La présente norme européenne fixe les spécifications et/ou les mesures à prendrepour minimiser les risques qui ne peuvent être éliminés concernant les mandrinsporte-pièces définis au paragraphe 3.1. Elle complète la norme européenne EN 292La présente norme traite de tous les risques applicables à ce composant. Les risques couverts par cette norme sont listés à l'article 4.
Machine-tools safety - Safety requirements for the design and construction of work holding chucks
General Information
- Status
- Withdrawn
- Publication Date
- 22-Jul-1997
- Withdrawal Date
- 29-Jul-2008
- Technical Committee
- CEN/TC 143 - Machine tools - Safety
- Drafting Committee
- CEN/TC 143/WG 3 - Turning machines - Safety
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 30-Jul-2008
- Completion Date
- 30-Jul-2008
- Directive
- 89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 18-Jan-2023
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 1550:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Machine-tools safety - Safety requirements for the design and construction of work holding chucks". This standard covers: This European Standard sets out the requirements and/or measures to remove the hazards and limit the risk on work holding chucks which are defined in 3.1. This European standard covers all the hazards relevant to this component. These hazards are listed in clause 4. The requirements of this standard concern designers, manufacturers, suppliers and importers of work holding chucks. This standard also includes information which the manufacturer shall provide for the user. This standard is primarily directed to components which are manufactured after the date of issue of this standard.
This European Standard sets out the requirements and/or measures to remove the hazards and limit the risk on work holding chucks which are defined in 3.1. This European standard covers all the hazards relevant to this component. These hazards are listed in clause 4. The requirements of this standard concern designers, manufacturers, suppliers and importers of work holding chucks. This standard also includes information which the manufacturer shall provide for the user. This standard is primarily directed to components which are manufactured after the date of issue of this standard.
EN 1550:1997 is classified under the following ICS (International Classification for Standards) categories: 25.060.20 - Dividing and tool-workpiece holding devices. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1550:1997 has the following relationships with other standards: It is inter standard links to EN 1550:1997+A1:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1550:1997 is associated with the following European legislation: EU Directives/Regulations: 89/392/EEC, 98/37/EC; Standardization Mandates: M/BC/CEN/88/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1550:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2000
Machine-tools safety - Safety requirements for the design and construction of
work holding chucks
Machine-tools safety - Safety requirements for the design and construction of work
holding chucks
Sicherheit von Werkzeugmaschinen - Sicherheitsanforderungen für die Gestaltung und
Konstruktion von Spannfuttern für die Werkstückaufnahme
Sécurité des machines-outils - Prescriptions de sécurité pour la conception et la
construction des mandrins porte-pieces
Ta slovenski standard je istoveten z: EN 1550:1997
ICS:
25.060.20 Delilniki in vpenjala za orodja Dividing and tool-workpiece
in obdelovance holding devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...