EN ISO 12625-5:2024
(Main)Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2024)
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2024)
This document specifies a test method for the determination of the wet tensile strength of tissue paper and tissue products after soaking with water, using a tensile-strength-testing apparatus operating with a constant rate of elongation.
Currently, two types of tensile-strength-testing apparatus are commercially available, one where the test piece is positioned vertically and, for the other, horizontally. This document applies for both. For vertical tensile-strength-testing apparatus, a device that is held in the lower grip of the tensile-strength-testing apparatus, called a Finch Cup, is used to achieve the wetting. For horizontal tensile-strength-testing apparatus, the soaking device is placed between the two clamps.
This document is not applicable to cases where impurities and contraries are determined.
Tissue-Papier und Tissue-Produkte - Teil 5: Bestimmung der breitenbezogenen Nassbruchkraft (ISO 12625-5:2024)
Papier tissue et produits tissue - Partie 5: Détermination de la résistance à la rupture par traction à l'état humide (ISO 12625-5:2024)
Le présent document spécifie une méthode d’essai pour la détermination de la résistance à la rupture par traction à l’état humide du papier tissue et des produits tissue, après immersion dans l’eau, en utilisant un appareil d’essai de traction fonctionnant à un gradient d’allongement constant.
Deux types d’appareils d’essai de traction sont actuellement commercialisés, l’un où l’éprouvette est placée à la verticale, et l’autre où l’éprouvette est placée à l’horizontale. Le présent document s’applique aux deux types d’appareils. Les appareils d’essai de traction à position verticale utilisent un dispositif maintenu dans la mâchoire inférieure, appelé dispositif d’immersion Finch, pour réaliser le mouillage. Dans le cas des appareils d’essai de traction en position horizontale, le dispositif d’immersion est placé entre les deux mâchoires.
Le présent document ne s’applique pas dans les cas où les impuretés et les défauts sont déterminés.
Svileni (tissue) papir in proizvodi iz svilenega (tissue) papirja - 5. del: Ugotavljanje mokre natezne trdnosti (ISO 12625-5:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 12625-5:2024
01-julij-2024
Svileni (tissue) papir in proizvodi iz svilenega (tissue) papirja - 5. del: Ugotavljanje
mokre natezne trdnosti (ISO 12625-5:2024)
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO
12625-5:2024)
Tissue-Papier und Tissue-Produkte - Teil 5: Bestimmung der breitenbezogenen
Nassbruchkraft (ISO 12625-5:2024)
Papier tissue et produits tissue - Partie 5: Détermination de la résistance à la rupture par
traction à l'état humide (ISO 12625-5:2024)
Ta slovenski standard je istoveten z: EN ISO 12625-5:2024
ICS:
85.080.20 Tissue papir Tissue paper
SIST EN ISO 12625-5:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 12625-5:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 12625-5:2024
EN ISO 12625-5
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2024
EUROPÄISCHE NORM
ICS 85.080.20 Supersedes EN ISO 12625-5:2016
English Version
Tissue paper and tissue products - Part 5: Determination
of wet tensile strength (ISO 12625-5:2024)
Papier tissue et produits tissue - Partie 5: Tissue-Papier und Tissue-Produkte - Teil 5:
Détermination de la résistance à la rupture par traction Bestimmung der breitenbezogenen Nassbruchkraft
à l'état humide (ISO 12625-5:2024) (ISO 12625-5:2024)
This European Standard was approved by CEN on 2 June 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12625-5:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 12625-5:2024
EN ISO 12625-5:2024 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 12625-5:2024
EN ISO 12625-5:2024 (E)
European foreword
This document (EN ISO 12625-5:2024) has been prepared by Technical Committee ISO/TC 6 "Paper,
board and pulps" in collaboration with Technical Committee CEN/TC 172 “Pulp, paper and board” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2024, and conflicting national standards
shall be withdrawn at the latest by December 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12625-5:2016.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 12625-5:2024 has been approved by CEN as EN ISO 12625-5:2024 without any
modification.
3
---------------------- Page: 5 ----------------------
...
SLOVENSKI STANDARD
oSIST prEN ISO 12625-5:2023
01-april-2023
Nadomešča:
SIST EN ISO 12625-5:2017
Tissue papir in proizvodi iz tissue papirja - 5. del: Ugotavljanje mokre natezne
trdnosti (ISO/DIS 12625-5:2023)
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO/DIS
12625-5:2023)
Tissue-Papier und Tissue-Produkte - Teil 5: Bestimmung der breitenbezogenen
Nassbruchkraft (ISO/DIS 12625-5:2023)
Papier tissue et produits tissue - Partie 5: Détermination de la résistance à la rupture par
traction à l'état humide (ISO/DIS 12625-5:2023)
Ta slovenski standard je istoveten z: prEN ISO 12625-5
ICS:
85.080.20 Tissue papir Tissue paper
oSIST prEN ISO 12625-5:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 12625-5:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 12625-5:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 12625-5
ISO/TC 6/SC 2 Secretariat: SIS
Voting begins on: Voting terminates on:
2023-01-24 2023-04-18
Tissue paper and tissue products —
Part 5:
Determination of wet tensile strength
Papier tissue et produits tissue —
Partie 5: Détermination de la résistance à la rupture par traction à l'état humide
ICS: 85.080.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 12625-5:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 12625-5:2023
ISO/DIS 12625-5:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 12625-5
ISO/TC 6/SC 2 Secretariat: SIS
Voting begins on: Voting terminates on:
Tissue paper and tissue products —
Part 5:
Determination of wet tensile strength
Papier tissue et produits tissue —
Partie 5: Détermination de la résistance à la rupture par traction à l'état humide
ICS: 85.080.20
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 12625-5:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 4 ----------------------
oSIST prEN ISO 12625-5:2023
ISO/DIS 12625-5:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.