SIST EN ISO 12625-5:2024
(Main)Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2024)
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2024)
ISO 12625-5:2016 specifies a test method for the determination of the wet tensile strength of tissue paper and tissue products after soaking with water, using a tensile-strength-testing apparatus operating with a constant rate of elongation.
Currently, two types of tensile-strength-testing apparatus are commercially available, one where the test piece is positioned vertically and, for the other, horizontally. This document applies for both. For vertical tensile-strength-testing apparatus, a device which is held in the lower grip of the tensile-strength-testing apparatus, called a Finch Cup, is used to achieve the wetting. For horizontal tensile-strength-testing apparatus, the soaking device is placed between the clamps.
In cases where impurities and contraries have to be determined, ISO 15755[6] applies for these detections in tissue paper and tissue products.
Tissue-Papier und Tissue-Produkte - Teil 5: Bestimmung der breitenbezogenen Nassbruchkraft (ISO 12625-5:2024)
Dieses Dokument legt ein Prüfverfahren zur Bestimmung der breitenbezogenen Nassbruchkraft von Tissue-Papier und Tissue-Produkten nach dem Wässern fest. Hierfür wird ein Zugprüfgerät eingesetzt, das mit konstanter Dehnungsgeschwindigkeit arbeitet.
Momentan sind zwei Arten von Zugprüfgeräten im Handel erhältlich. Bei der einen Art von Zugprüfgerät wird die Probe vertikal, bei der anderen horizontal positioniert. Dieses Dokument ist anwendbar für beide. Bei vertikalen Zugprüfgeräten erfolgt das Wässern mit Hilfe einer Vorrichtung, der so genannten Finch-Eintauchvorrichtung, die in der unteren Klemme des Zugprüfgeräts eingespannt wird. Bei horizontalen Zugprüfgeräten wird die Eintauchvorrichtung zwischen den zwei Klemmen angeordnet.
Dieses Dokument ist nicht anwendbar in Fällen, in denen Unreinheiten und Verunreinigungen bestimmt werden.
Papier tissue et produits tissue - Partie 5: Détermination de la résistance à la rupture par traction à l'état humide (ISO 12625-5:2024)
ISO 12625-5:2016 spécifie une méthode d'essai pour la détermination de la résistance à la rupture par traction à l'état humide du papier tissue et des produits tissue, après immersion dans l'eau, en utilisant un appareil d'essai de traction fonctionnant à une vitesse d'allongement constante.
Deux types d'appareils d'essai de traction sont actuellement commercialisés, l'un où l'éprouvette est placée à la verticale, et l'autre où l'éprouvette est placée à l'horizontale. Le présent document s'applique aux deux types d'appareils. Les appareils d'essai de traction à position verticale utilisent un dispositif maintenu dans la mâchoire inférieure, appelé dispositif d'immersion Finch, pour réaliser le mouillage. Dans le cas des appareils d'essai de traction en position horizontale, le dispositif d'immersion est placé entre les mâchoires.
Lorsque les impuretés et les défauts doivent être déterminés, l'ISO 15755[6] s'applique pour ces détections dans le papier tissue et les produits tissue.
Tissue higienski papir in proizvodi iz tissue papirja - 5. del: Ugotavljanje mokre natezne trdnosti (ISO 12625-5:2024)
Standard ISO 12625-5:2016 določa preskusno metodo za ugotavljanje mokre natezne trdnosti tissue papirja in proizvodov iz njega po namakanju v vodi, pri čemer se uporablja naprava za preskušanje natezne trdnosti, ki deluje s stalno hitrostjo raztezanja.
Na tržišču sta trenutno na voljo dve vrsti naprav za preskušanje natezne trdnosti; pri eni je preskušanec postavljen navpično, pri drugi pa vodoravno. Ta dokument se uporablja za obe vrsti naprav. Pri napravi, kjer se natezno trdnost preskuša navpično, močenje zagotavlja pripomoček, ki je v spodnjem primežu naprave in se imenuje Finch Cup. Pri napravi, kjer se natezno trdnost preskuša vodoravno, je naprava za namakanje nameščena med čeljustmi.
V primerih, ko je treba določiti nečistoče in nasprotja v tissue papirju in proizvodih iz njega, se uporablja standard ISO 15755 [6].
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2024
Tissue higienski papir in proizvodi iz tissue papirja - 5. del: Ugotavljanje mokre
natezne trdnosti (ISO 12625-5:2024)
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO
12625-5:2024)
Tissue-Papier und Tissue-Produkte - Teil 5: Bestimmung der breitenbezogenen
Nassbruchkraft (ISO 12625-5:2024)
Papier tissue et produits tissue - Partie 5: Détermination de la résistance à la rupture par
traction à l'état humide (ISO 12625-5:2024)
Ta slovenski standard je istoveten z: EN ISO 12625-5:2024
ICS:
85.080.20 Tissue papir Tissue paper
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 12625-5
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2024
EUROPÄISCHE NORM
ICS 85.080.20 Supersedes EN ISO 12625-5:2016
English Version
Tissue paper and tissue products - Part 5: Determination
of wet tensile strength (ISO 12625-5:2024)
Papier tissue et produits tissue - Partie 5: Tissue-Papier und Tissue-Produkte - Teil 5:
Détermination de la résistance à la rupture par traction Bestimmung der breitenbezogenen Nassbruchkraft
à l'état humide (ISO 12625-5:2024) (ISO 12625-5:2024)
This European Standard was approved by CEN on 2 June 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12625-5:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 12625-5:2024) has been prepared by Technical Committee ISO/TC 6 "Paper,
board and pulps" in collaboration with Technical Committee CEN/TC 172 “Pulp, paper and board” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2024, and conflicting national standards
shall be withdrawn at the latest by December 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12625-5:2016.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 12625-5:2024 has been approved by CEN as EN ISO 12625-5:2024 without any
modification.
International
Standard
ISO 12625-5
Third edition
Tissue paper and tissue products —
2024-05
Part 5:
Determination of wet tensile
strength
Papier tissue et produits tissue —
Partie 5: Détermination de la résistance à la rupture par traction
à l'état humide
Reference number
ISO 12625-5:2024(en) © ISO 2024
ISO 12625-5:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 12625-5:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
5.1 Vertical tensile-strength-testing apparatus .2
5.1.1 Tensile-strength-testing apparatus .2
5.1.2 Tensile-testing apparatus clamps .2
5.1.3 Finch Cup soaking device.3
5.2 Horizontal tensile-strength-testing apparatus .4
5.2.1 Tensile-strength-testing apparatus .4
5.2.2 Tensile-testing apparatus clamps .4
5.2.3 Soaking device .5
5.3 Cutting device .5
6 Conditioning . 5
7 Preparation of test pieces . 5
7.1 General .5
7.2 Accelerated ageing (curing) .5
7.3 Dimensions .6
7.3.1 Vertical tensile-strength-testing apparatus .6
7.3.2 Horizontal tensile-strength-testing apparatus .6
7.4 Number of test pieces .6
8 Procedure . 6
8.1 Calibration and adjustment of the testing apparatus .6
8.2 Vertical test method .6
8.2.1 Mounting the Finch Cup soaking device .6
8.2.2 Measurement .7
8.3 Horizontal test method .7
8.3.1 Wet tensile strength measurement .7
8.3.2 Wet-tensile-strength retention measurement .8
9 Calculation . 9
9.1 General .9
9.2 Wet tensile strength .9
9.3 Mean wet tensile strength retention .9
10 Test report . 10
Annex A (informative) Precision .11
Bibliography .15
iii
ISO 12625-5:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part
...
SLOVENSKI STANDARD
01-julij-2024
Svileni (tissue) papir in proizvodi iz svilenega (tissue) papirja - 5. del: Ugotavljanje
mokre natezne trdnosti (ISO 12625-5:2024)
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO
12625-5:2024)
Tissue-Papier und Tissue-Produkte - Teil 5: Bestimmung der breitenbezogenen
Nassbruchkraft (ISO 12625-5:2024)
Papier tissue et produits tissue - Partie 5: Détermination de la résistance à la rupture par
traction à l'état humide (ISO 12625-5:2024)
Ta slovenski standard je istoveten z: EN ISO 12625-5:2024
ICS:
85.080.20 Tissue papir Tissue paper
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 12625-5
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2024
EUROPÄISCHE NORM
ICS 85.080.20 Supersedes EN ISO 12625-5:2016
English Version
Tissue paper and tissue products - Part 5: Determination
of wet tensile strength (ISO 12625-5:2024)
Papier tissue et produits tissue - Partie 5: Tissue-Papier und Tissue-Produkte - Teil 5:
Détermination de la résistance à la rupture par traction Bestimmung der breitenbezogenen Nassbruchkraft
à l'état humide (ISO 12625-5:2024) (ISO 12625-5:2024)
This European Standard was approved by CEN on 2 June 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12625-5:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 12625-5:2024) has been prepared by Technical Committee ISO/TC 6 "Paper,
board and pulps" in collaboration with Technical Committee CEN/TC 172 “Pulp, paper and board” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2024, and conflicting national standards
shall be withdrawn at the latest by December 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12625-5:2016.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 12625-5:2024 has been approved by CEN as EN ISO 12625-5:2024 without any
modification.
International
Standard
ISO 12625-5
Third edition
Tissue paper and tissue products —
2024-05
Part 5:
Determination of wet tensile
strength
Papier tissue et produits tissue —
Partie 5: Détermination de la résistance à la rupture par traction
à l'état humide
Reference number
ISO 12625-5:2024(en) © ISO 2024
ISO 12625-5:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 12625-5:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
5.1 Vertical tensile-strength-testing apparatus .2
5.1.1 Tensile-strength-testing apparatus .2
5.1.2 Tensile-testing apparatus clamps .2
5.1.3 Finch Cup soaking device.3
5.2 Horizontal tensile-strength-testing apparatus .4
5.2.1 Tensile-strength-testing apparatus .4
5.2.2 Tensile-testing apparatus clamps .4
5.2.3 Soaking device .5
5.3 Cutting device .5
6 Conditioning . 5
7 Preparation of test pieces . 5
7.1 General .5
7.2 Accelerated ageing (curing) .5
7.3 Dimensions .6
7.3.1 Vertical tensile-strength-testing apparatus .6
7.3.2 Horizontal tensile-strength-testing apparatus .6
7.4 Number of test pieces .6
8 Procedure . 6
8.1 Calibration and adjustment of the testing apparatus .6
8.2 Vertical test method .6
8.2.1 Mounting the Finch Cup soaking device .6
8.2.2 Measurement .7
8.3 Horizontal test method .7
8.3.1 Wet tensile strength measurement .7
8.3.2 Wet-tensile-strength retention measurement .8
9 Calculation . 9
9.1 General .9
9.2 Wet tensile strength .9
9.3 Mean wet tensile strength retention .9
10 Test report . 10
Annex A (informative) Precision .11
Bibliography .15
iii
ISO 12625-5:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Dire
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.