EN 1948-2:1996
(Main)Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 2: Extraction and clean-up
Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 2: Extraction and clean-up
Thie present part of this Standard specifies the extraction and clean-up proce- dures of the sampled PCDDs/PCDFs. It is integral part of the complet measurementprocedure. The use of the other two parts EN 1948-1:1996 and EN 1948-3:1996 describing sampling or identification and quantification, respectively, is necessary for the determination of the PCDDs/PCDFs. This standard has been designed to measure PCDD/PCDF concentrations at about 0,1 ng I-TEQ/m cube in stationary source emissions.
Emissionen aus stationären Quellen - Bestimmung der Massenkonzentrationen von PCDDs/PCDFs - Teil 2: Extraktion und Reinigung
Der vorliegende Teil dieser Norm legt das Extraktions- und Reinigungsverfahren für die gesammelten PCDD/PCDF fest. Er ist integraler Bestandteil des voll- ständigen Messverfahrens. Die Anwendung der anderen beiden Teil EN 1948-1:1996 und EN 1948-3:1996, die die Probenahme bzw. die Identifizierung und Quantifizie-rung beschreiben , ist notwendig für die Bestimmung der PCDD und PCDF. Diese Norm ist für die Messung von PCDD/PCDF-Emissionskonzentrationen von stationären Quellen im Bereich von 0,1 ng I-TEQ/m3 konzipiert.
Emissions de sources fixes - Détermination de la concentration massique en PCDDs/PCDFs - Partie 2: Extraction et purification
La présente partie de cette norme prescrit des procédure d'extraction et de purification pour les échantillons de PCDD/PCDF prélevés. Elle esp partie inté- grante de la procédure complète de mesure. L'utilisation des deux autres parties de la présente norme EN 1948-1:1996 et 1948-3:1996 décrivant d'une part le pré-lèvement et d'autre part l'identification et la quanification est nécessaire pour la détermination des PCDD et PCDF. Cette norme a été préparée pour mesurer des concentrations au niveau de 0,1 ng I-TEQ/m cube dans les émissions de source fixe.
Emisije nepremičnih virov – Določevanje masne koncentracije PCDD/PCDF – 2. del: Ekstrakcija in čiščenje
General Information
- Status
- Withdrawn
- Publication Date
- 27-Dec-1996
- Withdrawal Date
- 14-Mar-2006
- Technical Committee
- CEN/TC 264 - Air quality
- Drafting Committee
- CEN/TC 264/WG 1 - Dioxins - emissions
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 15-Mar-2006
- Completion Date
- 15-Mar-2006
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
NSF International
Global independent organization facilitating standards development and certification.
CIS Institut d.o.o.
Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.
Kiwa BDA Testing
Building and construction product certification.
Sponsored listings
Frequently Asked Questions
EN 1948-2:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 2: Extraction and clean-up". This standard covers: Thie present part of this Standard specifies the extraction and clean-up proce- dures of the sampled PCDDs/PCDFs. It is integral part of the complet measurementprocedure. The use of the other two parts EN 1948-1:1996 and EN 1948-3:1996 describing sampling or identification and quantification, respectively, is necessary for the determination of the PCDDs/PCDFs. This standard has been designed to measure PCDD/PCDF concentrations at about 0,1 ng I-TEQ/m cube in stationary source emissions.
Thie present part of this Standard specifies the extraction and clean-up proce- dures of the sampled PCDDs/PCDFs. It is integral part of the complet measurementprocedure. The use of the other two parts EN 1948-1:1996 and EN 1948-3:1996 describing sampling or identification and quantification, respectively, is necessary for the determination of the PCDDs/PCDFs. This standard has been designed to measure PCDD/PCDF concentrations at about 0,1 ng I-TEQ/m cube in stationary source emissions.
EN 1948-2:1996 is classified under the following ICS (International Classification for Standards) categories: 13.040.40 - Stationary source emissions. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1948-2:1996 has the following relationships with other standards: It is inter standard links to EN 1948-2:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1948-2:1996 is associated with the following European legislation: EU Directives/Regulations: 89/369/EEC, 89/429/EEC, 94/67/EC; Standardization Mandates: M/BC/CEN/91/12. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1948-2:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Emissionen aus stationären Quellen - Bestimmung der Massenkonzentrationen von PCDDs/PCDFs - Teil 2: Extraktion und ReinigungEmissions de sources fixes - Détermination de la concentration massique en PCDDs/PCDFs - Partie 2: Extraction et purificationStationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 2: Extraction and clean-up13.040.40Stationary source emissionsICS:Ta slovenski standard je istoveten z:EN 1948-2:1996SIST EN 1948-2:1999en01-september-1999SIST
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...