Adhesives - Designation of main failure patterns (ISO 10365:2022)

This document specifies the designations for the main types of failure pattern of bonded assemblies and illustrates, through diagrams, their respective appearances.
This document applies to all mechanical tests performed on a bonded assembly, regardless of the nature of the adherends and adhesive which make up the assembly.

Klebstoffe - Bezeichnung der wichtigsten Bruchbilder (ISO 10365:2022)

Dieses Dokument legt die Bezeichnungen der wichtigsten Bruchbildarten von geklebten Fügeanordnungen fest und veranschaulicht anhand von Abbildungen ihr jeweiliges Aussehen.
Dieses Dokument ist anwendbar bei allen mechanischen Prüfungen an einer geklebten Fügeanordnung, ungeachtet der Natur der Fügeteile und des Klebstoffes, die zur Herstellung der Fügeanordnung verwendet wurden.

Adhésifs - Désignation des principaux faciès de rupture (ISO 10365:2022)

Le présent document décrit la désignation des principaux types de ruptures des assemblages collés et illustre, à l’aide de schémas, les faciès respectifs.
Le présent document s’applique à tous les types d’essais mécaniques qui sont effectués sur un assemblage collé quelle que soit la nature des supports et de l’adhésif constituant l’assemblage.

Lepila - Označevanje glavnih načinov porušitev (ISO 10365:2022)

Ta dokument določa oznake za glavne vrste načinov porušitev lepljenih spojev
in ponazarja njihov videz z diagrami.
Ta dokument se uporablja za vse mehanske preskuse, izvedene na lepljenem spoju, ne glede na vrsto lepljencev in lepila, ki tvorijo spoj.

General Information

Status
Published
Publication Date
08-Feb-2022
Withdrawal Date
30-Aug-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
09-Feb-2022
Completion Date
09-Feb-2022

Relations

Buy Standard

Standard
EN ISO 10365:2022
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10365:2022
01-april-2022
Nadomešča:
SIST EN ISO 10365:1998
Lepila - Označevanje glavnih načinov porušitev (ISO 10365:2022)
Adhesives - Designation of main failure patterns (ISO 10365:2022)
Klebstoffe - Bezeichnung der wichtigsten Bruchbilder (ISO 10365:2022)
Adhésifs - Désignation des principaux faciès de rupture (ISO 10365:2022)
Ta slovenski standard je istoveten z: EN ISO 10365:2022
ICS:
83.180 Lepila Adhesives
SIST EN ISO 10365:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10365:2022

---------------------- Page: 2 ----------------------
SIST EN ISO 10365:2022


EN ISO 10365
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2022
EUROPÄISCHE NORM
ICS 83.180 Supersedes EN ISO 10365:1995
English Version

Adhesives - Designation of main failure patterns (ISO
10365:2022)
Adhésifs - Désignation des principaux faciès de rupture Klebstoffe - Bezeichnung der wichtigsten Bruchbilder
(ISO 10365:2022) (ISO 10365:2022)
This European Standard was approved by CEN on 16 January 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10365:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 10365:2022
EN ISO 10365:2022 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 10365:2022
EN ISO 10365:2022 (E)
European foreword
This document (EN ISO 10365:2022) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 193 “Adhesives” the secretariat of which is held by
UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2022, and conflicting national standards shall
be withdrawn at the latest by August 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10365:1995.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 10365:2022 has been approved by CEN as EN ISO 10365:2022 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 10365:2022

---------------------- Page: 6 ----------------------
SIST EN ISO 10365:2022
INTERNATIONAL ISO
STANDARD 10365
Second edition
2022-01
Adhesives — Designation of main
failure patterns
Adhésifs — Désignation des principaux faciès de rupture
Reference number
ISO 10365:2022(E)
© ISO 2022

---------------------- Page: 7 ----------------------
SIST EN ISO
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.