EN 1652:1997
(Main)Copper and copper alloys - Plate, sheet, strip and circles for general purposes
Copper and copper alloys - Plate, sheet, strip and circles for general purposes
This European Standard specifies the composition, property requirements and tolerances on dimensions and form for copper and copper alloy plate, sheet, strip and circles for general purposes. The sampling procedures, the methods of test for verification of conformity to the requirements of this standard, and the delivery conditions are also specified.
Kupfer und Kupferlegierungen - Platten, Bleche, Bänder, Streifen und Ronden zur allgemeinen Verwendung
Diese Europäische Norm legt die Zusammensetzung, die Anforderungen an die Eigenschaften, Grenzabmaße und Formtoleranzen von Platten, Blechen, Bändern, und Ronden aus Kupfer und Kupferlegierungen zur allgemeinen Verwendung fest. Der Ablauf der Probenentnahme, die Prüfverfahren zur Feststellung der Übereinstimmung mit den Anforderungen der Norm und die Lieferbedingungen sind ebenfalls festgelegt.
Cuivre et alliages de cuivre - Plaques, tôles, bandes et disques pour usages généraux
La présente norme européenne spécifie la composition, les caractéristiques et les tolérances de dimensions et de formes des plaques, des tôles, bandes et disques en cuivre et alliages de cuivre pour usages généraux. Les procédures d'échantillonnage, les méthodes d'essai pour la vérification de la conformité aux prescriptions des normes et les conditions de livraison sont également spécifiées.
Baker in bakrove zlitine - Plošče, pločevina, trakovi in diski za splošno uporabo
General Information
- Status
- Published
- Publication Date
- 16-Dec-1997
- Withdrawal Date
- 29-Jun-1998
- Technical Committee
- CEN/TC 133 - Copper and copper alloys
- Drafting Committee
- CEN/TC 133/WG 2 - Rolled flat products
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 16-Nov-2023
- Completion Date
- 14-Apr-2025
Relations
- Corrected By
EN 1652:1997/AC:2003 - Copper and copper alloys - Plate, sheet, strip and circles for general purposes - Effective Date
- 22-Dec-2008
Overview
EN 1652:1997 (issued by CEN) specifies requirements for copper and copper alloys in the form of plate, sheet, strip and circles for general purposes. The standard defines the required composition, property requirements, and tolerances on dimensions and form. It also covers sampling procedures, methods of test for verification of conformity, and the delivery conditions suppliers and purchasers should use.
Key topics and technical requirements
- Material composition: Specifies the chemical make-up accepted for copper and copper alloys covered by the standard (limits and designation principles).
- Property requirements: Defines essential mechanical and physical characteristics that the delivered products must meet (e.g., strength and ductility requirements as applicable).
- Dimensional and form tolerances: Sets tolerances for thickness, width, length and flatness/shape to ensure interchangeability and fit for general-purpose applications.
- Sampling procedures: Describes how to take representative samples from production batches for testing and conformity assessment.
- Methods of test: Lists the standardized test methods to verify composition and properties (laboratory testing procedures, hardness or mechanical tests where applicable).
- Delivery conditions: Covers marking, packaging, documentation and agreed delivery state between manufacturer and purchaser to ensure traceability and compliance.
Practical applications and users
EN 1652:1997 is intended for use where consistent, verified copper and copper-alloy plate, sheet, strip and circles are required for general-purpose manufacturing and fabrication. Typical users include:
- Manufacturers and suppliers of copper mill products who must certify product conformity and prepare delivery documentation.
- Procurement and quality engineers specifying material requirements for components and assemblies.
- Testing laboratories and inspection bodies performing sampling and conformity verification against the standard.
- Designers and fabricators needing standardized material properties and tolerances for metalworking, forming and joining operations.
- Regulatory and compliance teams referencing CEN standards in contracts and technical specifications.
Related standards
- EN 1652:1997 is part of the family of CEN material standards; users often reference complementary EN standards for specific test methods, product grades or finish specifications. For procurement and conformity processes, consult relevant CEN and national adoption documents.
Keywords: EN 1652:1997, copper and copper alloys, plate sheet strip circles, tolerances, composition, sampling procedures, methods of test, delivery conditions, CEN standard, material specifications.
Frequently Asked Questions
EN 1652:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Copper and copper alloys - Plate, sheet, strip and circles for general purposes". This standard covers: This European Standard specifies the composition, property requirements and tolerances on dimensions and form for copper and copper alloy plate, sheet, strip and circles for general purposes. The sampling procedures, the methods of test for verification of conformity to the requirements of this standard, and the delivery conditions are also specified.
This European Standard specifies the composition, property requirements and tolerances on dimensions and form for copper and copper alloy plate, sheet, strip and circles for general purposes. The sampling procedures, the methods of test for verification of conformity to the requirements of this standard, and the delivery conditions are also specified.
EN 1652:1997 is classified under the following ICS (International Classification for Standards) categories: 77.150.30 - Copper products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1652:1997 has the following relationships with other standards: It is inter standard links to EN 1652:1997/AC:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1652:1997 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1652:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kupfer und Kupferlegierungen - Platten, Bleche, Bänder, Streifen und Ronden zur allgemeinen VerwendungCuivre et alliages de cuivre - Plaques, tôles, bandes et disques pour usages générauxCopper and copper alloys - Plate, sheet, strip and circles for general purposes77.150.30Bakreni izdelkiCopper productsICS:Ta slovenski standard je istoveten z:EN 1652:1997SIST EN 1652:2000en01-november-2000SIST EN 1652:2000SLOVENSKI
STANDARD
S
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...