EN 13796-3:2005
(Main)Safety requirements for cableway installations designed to carry persons - Carriers - Part 3: Fatigue tests
Safety requirements for cableway installations designed to carry persons - Carriers - Part 3: Fatigue tests
This European Standard specifies the safety requirements applicable to carriers for cableway installations for
passenger transportation. This standard is applicable to the various types of installations and takes into
account their environment.
This European Standard sets out the requirements to be met for fatigue tests for carriers of unidirectional
monocable aerial ropeways of capacity not greater than 16 persons according to 6.3.3.1 of Part 1 of this
standard..
This standard does not apply to installations for the transportation of goods nor to inclined lifts.
Sicherheitsanforderungen für Seilbahnen für den Personenverkehr - Fahrzeuge - Teil 3: Ermüdungsversuche
Diese Europäische Norm legt die Sicherheitsanforderungen für Fahrzeuge von Seilbahnen des Personenverkehrs fest. Dabei werden die verschiedenen Seilbahn und deren Umgebung berücksichtigt.
Der vorliegende Teil 3 beschreibt die Anforderungen, die während der Ermüdungsversuche an Fahrzeugen von Einseilumlaufbahnen mit einem Fassungsvermögen von bis zu 16 Personen nach Ziffer 6.3.3.1 des Teil 1 der vorliegenden Norm einzuhalten sind.
Sie gilt weder für die Seilbahnen des Güterverkehrs, noch für die Schrägaufzüge.
Prescriptions de sécurité pour les installations à câbles transportant des personnes - Véhicules - Partie 3 : Essais de fatigue
Cette norme européenne établit les prescriptions de sécurité s'appliquant aux véhicules des installations de transport à câbles destinées aux personnes. Elle s'applique aux différents systèmes et tient compte de leur environnement.
La présente troisième partie décrit les exigences à respecter lors des essais de fatigue des véhicules des téléphériques monocâbles à mouvement unidirectionnel dont la capacité est inférieure ou égale à 16 places, selon le 6.3.3.1 de la partie 1 de la présente norme.
Elle ne s'applique ni aux installations de transport à câbles destinées aux marchandises, ni aux ascenseurs inclinés.
Varnostne zahteve za žičniške naprave za prevoz oseb – Vozila – 3. del: Preskusi utrujenosti
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety requirements for cableway installations designed to carry persons - Carriers - Part 3: Fatigue testsXWUXMHQRVWLPrescriptions de sécurité pour les installations a câbles transportant des personnes - Véhicules - Partie 3 : Essais de fatigueSicherheitsanforderungen für Seilbahnen für den Personenverkehr - Fahrzeuge - Teil 3: ErmüdungsversucheTa slovenski standard je istoveten z:EN 13796-3:2005SIST EN 13796-3:2005en45.100Cableway equipmentICS:SLOVENSKI
STANDARDSIST EN 13796-3:200501-november-2005
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13796-3May 2005ICS 45.100English versionSafety requirements for cableway installations designed to carrypersons - Carriers - Part 3: Fatigue testsPrescriptions de sécurité pour les installations à câblestransportant des personnes - Véhicules - Partie 3 : Essaisde fatigueSicherheitsanforderungen für Seilbahnen für denPersonenverkehr - Fahrzeuge - Teil 3: ErmüdungsversucheThis European Standard was approved by CEN on 17 April 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13796-3:2005: E
Relationship between this
European
Standard and the Essential Requirements
of EU Directive 2000/9/EC relating to cableway installations designed to carry persons.11
1) Safety requirements for cableway installations designed to carry persons - Terminology 2) Safety requirements for cableway installations designed to carry persons - General requirements 3) Safety requirements for cableway installations designed to carry persons - Calculations 4) Safety requirements for cableway installations designed to carry persons - Ropes 5) Safety requirements for cableway installations designed to carry persons - Tensioning devices 6) Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment 7) Safety requirements for cableway installations designed to carry persons - Carriers 8) Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems 9) Safety requirements for cableway installations designed to carry persons - Civil engineering works 10) Safety requirements for cableway installations designed to carry persons – Pre-commissioning inspection, maintenance and operational inspection and checks 11) Safety requirements for cableway installations designed to carry persons – Recovery and evacuation
1 Scope This European Standard specifies the safety requirements applicable to carriers for cableway installations for passenger transportation. This standard is applicable to the various types of installations and takes into account their environment. This European Standard sets out the requirements to be met for fatigue tests for carriers of unidirectional monocable aerial ropeways of capacity not greater than 16 persons according to 6.3.3.1 of Part 1 of this st
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.