EN 1369:1996
(Main)Founding - Magnetic particle inspection
Founding - Magnetic particle inspection
This European Standard applies to the magnetic particle inspection of ferro-magnetic iron and steel castings. It also gives acceptance criteria through severity levels defined by the nature, the area and the dimensions of the discontinuities present. This standard applies to all ferro-magnetic castings independent of the moulding method. An iron or steel casting is considered to be ferro-magnetic if the magnetic induction is greater than 1 T (Tesla) for a magnetic field strength of 2,4 kA/m.
Gießereiwesen - Magnetpulverprüfung
Diese Europäische Norm gilt für die Magnetpulverprüfung an ferromagnetischen Eisen- und Stahlgußstücken. Weiterhin enthält sie Abnahmekriterien mit Hilfe von Gütestufen, die nach Art, Bereich und Abmessungen der vorliegenden Fehler definiert sind. Diese Norm gilt für alle Gußstücke aus ferromagnetischen Werkstoffen unabhängig vom Formverfahren. Ein Gußstück aus Gußeisen oder Stahl wird als ferromagnetisch betrachtet, wenn die magnetische Induktion bei einer magnetischen Feldstärke von 2,4 kA/m größer als 1 T (Tesla) ist.
Fonderie - Contrôle par magnétoscopie
La présente norme décrit une méthode de contrôle par magnétoscopie des pièces moulées en fonte et en acier ferromagnétique. Elle fixe également les critères d'acceptation sous forme de niveaux de sévérité, définis par la nature, la superficie et les dimensions des discontinuités observées. La présente norme s'applique à toutes les pièces ferromagnétiques moulées, quelle que soit la méthode de moulage. Une pièce moulée en fonte ou en acier est considérée comme étant ferromagnétique si son induction magnétique est supérieure à 1 T (Tesla) pour un champ magnétique de 2,4 kA/m.
Livarstvo - Preiskave z magnetnimi prahovi
General Information
- Status
- Withdrawn
- Publication Date
- 19-Nov-1996
- Withdrawal Date
- 16-Oct-2012
- Technical Committee
- CEN/TC 190 - Foundry technology
- Drafting Committee
- CEN/TC 190/WG 11 - Surface inspection
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 17-Oct-2012
- Completion Date
- 17-Oct-2012
Relations
- Effective Date
- 24-Oct-2012
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 1369:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Founding - Magnetic particle inspection". This standard covers: This European Standard applies to the magnetic particle inspection of ferro-magnetic iron and steel castings. It also gives acceptance criteria through severity levels defined by the nature, the area and the dimensions of the discontinuities present. This standard applies to all ferro-magnetic castings independent of the moulding method. An iron or steel casting is considered to be ferro-magnetic if the magnetic induction is greater than 1 T (Tesla) for a magnetic field strength of 2,4 kA/m.
This European Standard applies to the magnetic particle inspection of ferro-magnetic iron and steel castings. It also gives acceptance criteria through severity levels defined by the nature, the area and the dimensions of the discontinuities present. This standard applies to all ferro-magnetic castings independent of the moulding method. An iron or steel casting is considered to be ferro-magnetic if the magnetic induction is greater than 1 T (Tesla) for a magnetic field strength of 2,4 kA/m.
EN 1369:1996 is classified under the following ICS (International Classification for Standards) categories: 25.120.30 - Moulding equipment; 77.160 - Powder metallurgy. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1369:1996 has the following relationships with other standards: It is inter standard links to EN 1369:2012, EN 13411-6:2004+A1:2008, EN 13445-6:2009, EN 10213:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1369:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Livarstvo - Preiskave z magnetnimi prahoviGießereiwesen - MagnetpulverprüfungFonderie - Contrôle par magnétoscopieFounding - Magnetic particle inspection77.160Metalurgija prahovPowder metallurgy25.120.30Livarska opremaMoulding equipmentICS:Ta slovenski standard je istoveten z:EN 1369:1996SIST EN 1369:1997en01-december-1997SIST EN 1369:1997SLOVENSKI
STANDARD
SIST
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...