iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 15378:2007

(Main)

Heating systems in buildings - Inspection of boilers and heating systems

Heating systems in buildings - Inspection of boilers and heating systems

This European Standard specifies inspection procedures and optional measurement methods for the assessment of energy performance of existing boilers and heating systems.
Boiler types covered by this European Standard are:
   boilers for heating, domestic hot water or both;
   gas, liquid or solid fuel fired boilers.
Parts of heating systems covered by this European Standard are:
   boilers, including generation control;
   other generation devices;
   domestic hot water production facilities;
   heating distribution network, including associated components and controls;
   heat emitters, including components and controls;
   space heating control system;
   storage and associated components;
   domestic hot water control system.
This standard covers issues related to energy conservation and environmental performance.

Heizungssysteme in Gebäuden - Inspektion von Kesseln und Heizungssystemen

Diese Europäische Norm legt Inspektionsverfahren und optionale Messverfahrenmethoden für die Beurteilung der Energieeffizienz von vorhandenen Wärmeerzeugern und Heizungsanlagen fest.
Wärmeerzeugertypen, die von dieser Europäischen Norm erfasst werden, sind:
   Wärmeerzeuger für Heizung, Trinkwarmwasser oder beides;
   Wärmeerzeuger für gasförmige, flüssige oder feste Brennstoffe.
Komponenten von Heizungsanlagen, die von dieser Europäischen Norm erfasst werden, sind:
   Wärmeerzeuger, einschließlich der Regelung;
   sonstige Wärmeerzeugungseinrichtungen;
   Trinkwarmwasserbereitungsanlagen;
   Wärmeverteilnetz, einschließlich der verbundenen Komponenten und Regelungen;
   Heizflächen, einschließlich der Komponenten und Regelungen;
   Raumheizregelung;
   Speicherung und zugehörige Komponenten;
   Trinkwarmwasser-Regelungsanlagen.
Trinkwarmwasser-Regelungsanlagen.
Diese Norm umfasst Themen, die sich auf Energieeinsparung und auf Umweltschutzaspekte beziehen.

Systèmes de chauffage dans les bâtiments - Inspection des chaudières et des systèmes de chauffage

La présente Norme européenne spécifie des procédures d’inspection et des méthodes de mesure facultatives pour l’évaluation de la performance énergétique des chaudières et des systèmes de chauffage existants.
La présente Norme européenne couvre les types de chaudières suivants :
   les chaudières pour le chauffage, l’eau chaude sanitaire ou les deux ;
   les chaudières utilisant des combustibles gazeux, liquides ou solides.
La présente Norme européenne couvre les parties suivantes des systèmes de chauffage :
   les chaudières, y compris la régulation de la génération ;
   les autres équipements de génération ;
   les installations de production d’eau chaude sanitaire ;
   les réseaux de distribution de chaleur, y compris les composants et les dispositifs de régulation associés ;
   les émetteurs de chaleur, y compris leurs composants et dispositifs de régulation ;
   le système de régulation de chaleur dans les locaux ;
   la cuve et les équipements associés ;
   le système de régulation de la production d’eau chaude sanitaire.
La présente norme couvre les questions liées à l’économie d’énergie et à la performance environnementale.
1   Références normatives
Non applicable.

Grelni sistemi v stavbah - Nadzor kurilnih naprav in grelnih sistemov

General Information

Status
Withdrawn
Publication Date
11-Sep-2007
Withdrawal Date
02-May-2017
ICS
91.140.10 - Central heating systems
Technical Committee
CEN/TC 228 - Heating systems in buildings
Drafting Committee
CEN/TC 228/WG 4 - Calculation methods and system performance and evaluation
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
03-May-2017
Mandate
M/343 - Mandate to CEN, CENELEC and ETSI for the elaboration and adoption of standards for a methodology calculating the integrated energy performance of buildings and estimating the environmental impact, in accordance with the terms set forth in Directive 2002/91/EC
Ref Project
SIST EN 15378:2007 - Heating systems in buildings - Inspection of boilers and heating systems

Relations

Replaced By
EN 15378-1:2017 - Energy performance of buildings - Heating systems and DHW in buildings - Part 1: Inspection of boilers, heating systems and DHW, Module M3-11, M8-11
Effective Date
08-Jun-2022

Buy Standard

EN 15378:2007EN 15378:2007
PreviousNext
Standard
EN 15378:2007
English language
86 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Heating systems in buildings - Inspection of boilers and heating systemsGrelni sistemi v stavbah - Nadzor kurilnih naprav in grelnih sistemovSystemes de chauffage dans les bâtiments - Inspection des chaudieres et des installations de chauffageHeizungssysteme in Gebäuden - Inspektion von Kesseln und HeizungssystemenTa slovenski standard je istoveten z:EN 15378:2007SIST EN 15378:2007en,de91.140.10Sistemi centralnega ogrevanjaCentral heating systemsICS:SLOVENSKI
STANDARDSIST EN 15378:200701-december-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15378September 2007ICS 91.140.10 English VersionHeating systems in buildings - Inspection of boilers and heatingsystemsSystèmes de chauffage dans les bâtiments - Inspectiondes chaudières et des systèmes de chauffageHeizungssysteme in Gebäuden - Inspektion von Kesselnund HeizungssystemenThis European Standard was approved by CEN on 28 July 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15378:2007: E

Default inspection class tables.25 A.1 Legend for default inspection class tables.25 A.2 Boiler inspection.25 A.3 Heating system inspection.28 A.4 Obligatory references if applying this annex.28 Annex B (informative)
Examples of national inspection class tables.36 B.1 Definition of classes.36 B.2 Boiler inspection.36

Flue gas analysis and boiler basic settings check.38 C.1 Measuring procedure.38 C.2 Maintenance data.42 C.3 Reference values for flue gas analysis.42 C.4 Advice on boiler basic setting.42 C.5 Obligatory references if applying this annex.43 Annex D (informative)
Sample boiler inspection report.44 Annex E (informative)
List of possible improvement actions.46 E.1 Introduction.46 E.2 Boiler.46 E.3 Heating system generation.46 E.4 Space heating distribution system.47 E.5 Space heating emission system.47 E.6 Heating system control.47 E.7 Domestic hot water.48 E.8 Other.48 Annex F (informative)
Evaluation of energyware consumption for
space heating system and domestic hot water system.50 F.1 General.50 F.2 Energyware measurement methodologies.50 F.3 Measurement period.52 F.4 Usage separation.53 F.5 Climatic data and domestic hot water production.54 F.6 Reference values.54 F.7 Advice criteria on energyware consumption.55 F.8 Obligatory references if applying this annex.56 Annex G (informative)
Stratification in high ceiling rooms.57 Annex H (informative)
Space heating emission control sub-system.58 H.1 Identification of the heat emission control level.58 H.2 Indoor temperature check.58 H.3 Advice.59 Annex I (informative)
Space heating distribution sub-system.60 I.1 Flow rate.60 I.2 Type and setting of circulation pumps.60 I.3 Distribution circuit typology.60 I.4 Compatibility of distribution circuits with boiler typology.60 I.5 Insulation.60 Annex J (informative)
Domestic hot water system.61 J.1 Recirculation losses.61 Annex K (informative)
Sample inspection report for heating system.62 Annex L (informative)
Boiler settings verification.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 17956:2024(Main)
Energy efficiency classes for technical insulation systems - Calculation method and applications
SIST EN 17956:2024

This document is applicable to technical insulation systems of operational installations in industry and the building services, such as pipes, ducts, vessels, equipment and built-in components.
The document specifies methods for the energy efficiency classification of insulation systems for the abovementioned components with an operational temperature range of −30 °C up to 650 °C.
The document addresses plant operators, engineers of operational installations, as well as the involved contractors such as insulation contractors and pipefitting contractors.
The design of safe surface temperatures for personal protection, as well as the prevention of condensation, is outside the scope of this document.
This document also does not apply to water-based heating and cooling systems in buildings and does not apply to directly buried district heating and district cooling pipes.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11855-5:2021(Main)
Building environment design - Embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5:2021)
SIST EN ISO 11855-5:2021

This document establishes requirements for the installation of embedded radiant heating and cooling systems. It specifies general and uniform requirements for the design and construction of heating and cooling floors, ceiling and wall structures to ensure that the heating/cooling systems are suited to the particular application. The requirements specified by this document are applicable only to the components of the heating/cooling systems and the elements which are part of the heating/cooling surface and which are installed due to the heating/cooling systems.
This document is applicable to water-based embedded surface heating and cooling systems in residential, commercial and industrial buildings. The methods apply to systems integrated into the wall, floor or ceiling construction without any open-air gaps, but are not applicable to panel systems with open-air gaps which are not integrated into the building structure.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11855-3:2021(Main)
Building environment design - Embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3:2021)
SIST EN ISO 11855-3:2021

This document establishes a system design and dimensioning method to ensure the heating and cooling capacity of the radiant heating and cooling systems.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11855-4:2021(Main)
Building environment design - Embedded radiant heating and cooling systems - Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO 11855-4:2021)
SIST EN ISO 11855-4:2021

This document allows the calculation of peak cooling capacity of Thermo Active Building Systems (TABS) – Type V according to ISO 11855-1, based on heat gains, such as solar gains, internal heat gains, and ventilation, and the calculation of the cooling power demand on the water side, to be used to size the cooling system, as regards, e.g. the chiller size, fluid flow rate.
This document defines a detailed method aimed at the calculation of heating and cooling capacity in non-steady state conditions.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11855-1:2021(Main)
Building environment design - Embedded radiant heating and cooling systems - Part 1: Definitions, symbols, and comfort criteria (ISO 11855-1:2021)
SIST EN ISO 11855-1:2021

This document specifies the basic definitions, symbols, and comfort criteria for embedded radiant heating and cooling systems.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15316-4-2:2017/AC:2017(Corrigendum)
Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-2: Space heating generation systems, heat pump systems, Module M3-8-2, M8-8-2
SIST EN 15316-4-2:2018/AC:2018
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12831-1:2017(Main)
Energy performance of buildings - Method for calculation of the design heat load - Part 1: Space heating load, Module M3-3
SIST EN 12831-1:2018

This European Standard covers methods for the calculation of the design heat load for single rooms, building entities and buildings, where the design heat load is defined as the heat supply (power) needed to maintain the required internal design temperature under design external conditions.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000 -1.
NOTE 1   In CEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 2   The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.
(...)

  • Standard
    95 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12831-3:2017(Main)
Energy performance of buildings - Method for calculation of the design heat load - Part 3: Domestic hot water systems heat load and characterisation of needs, Module M8-2, M8-3
SIST EN 12831-3:2018

This European Standard describes a method to calculate the power and the storage volume required for the dimensioning of domestic hot water systems (DHW). The applicability ranges from direct water heaters (no storage volume and a comparatively large effective heating power) to larger storage systems with a comparatively small heating power and large storage volumes.
This European Standard is applicable to the following water storage systems:
-   storage systems characterized by a minimal mixing zone, (such as stratified charging storage tanks or storage tanks with external heat exchangers): these systems are nominated in this standard as "charging storage systems";
-   storage tank water heaters and warm water storage tanks with a pronounced mixing zone (such as DHW storage tanks with internal heat exchangers), nominated in this standard as "mixed storage systems";
and for different uses.
The Scope also includes standardization methods for determining the energy need for domestic hot water. This European Standard covers the domestic hot water needs in buildings.
The calculation of the energy needs for DHW-Systems applies to residential and non-residential buildings, a building or a zone of a building.
Figure 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1.
NOTE 1   In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 2   The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.
Table 1 shows the relative position of this standard within the EPB package of standards.
(...)

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15459-1:2017(Main)
Energy performance of buildings - Economic evaluation procedure for energy systems in buildings - Part 1: Calculation procedures, Module M1-14
SIST EN 15459-1:2018

This European Standard provides a calculation method for the economic issues of heating systems and other systems that are involved in the energy demand and consumption of the building. It applies to all types of new and existing buildings.
The fundamental principles and terminology are explained in the standard.
The main items of the standard will be:
-   the definitions and the structure of the types of costs which should be taken into account for the calculation of the economic efficiency of saving options in buildings;
-   data needed for definition of costs related to systems under consideration;
-   the calculation method(s);
-   expression of the result of the economic study.
This European Standard is part of the method for calculation of economic performance of energy saving options in buildings (e.g. insulation, better performing generators and distribution systems, efficient lighting, renewable sources, combined heat and power...).
The scope of this specific part is to standardize:
-   the required inputs;
-   the required outputs;
-   the calculation formulas;
-   the type of energy systems concerned with the energy performance of the building.
NOTE 1   This is the revision of EN 15459:2007. The revision has been made consistent with the EU regulation on cost-optimal. This revision includes the definition of payback for investment, and inclusion of the costs due to the deconstruction of the building. The method presenting annualized costs has been suppressed.
NOTE 2   This standard does not consider financial advantages for higher productivity, higher attractiveness for tenants due to higher indoor comfort, when relevant for comparison of different options.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1.
NOTE 3   In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 4   The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.
(...)

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15316-4-1:2017(Main)
Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating and DHW generation systems, combustion systems (boilers, biomass), Module M3-8-1, M8-8-1
SIST EN 15316-4-1:2018

This European Standard is part of a series of standards on the method for calculation of system energy requirements and system efficiencies of space heating systems and domestic hot water systems.
This standard (EN 15316 4 1) specifies:
-   required inputs;
-   a calculation method;
-   resulting outputs;
-   a method to take into account the energy performance of heat generation devices based on fuel combustion;
for space heating generation by combustion sub-systems (boilers, biomass), including control.
This standard specifies methods for the calculation of:
-   thermal losses from the heating and the domestic hot water generation system;
-   recoverable thermal losses for space heating from the heating and the domestic hot water generation system;
-   auxiliary energy of the heating and the domestic hot water generation systems.
This standard specifies the energy performance calculation of water based heat generation sub-systems including control based on combustion of fuels ("boilers"), operating with conventional fossil fuels as well as renewable fuels. This standard does not cover sizing or inspection of boilers.
This standard is also applicable to heat generators for heating or for combined service as domestic hot water, ventilation, cooling and heating. Generators for domestic hot water only are taken into account into part M8-8.
This European Standard is the general standard on generation by combustion sub-systems (boilers, biomass) and is also intended for generation for domestic hot water production and/or space heating. These values are input data for calculation of the overall energy use according to EN ISO 52000 1 and EN 15316 1.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000 1.
NOTE 1   In CEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 2   The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day