EN 13081:2008
(Main)Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
This European Standard covers the vapour collection adaptor and coupler used to achieve a vapour tight path between the transport tank and the stationary loading and unloading facilities.
This European Standard specifies the performance requirements and the critical dimensions of the vapour recovery adaptor fitted to the tank and the mating coupler fitted to a hose or to pipework connected to the stationary loading and unloading facilities. It also specifies the tests necessary to verify the compliance of the equipment with this standard. The equipment specified by this European Standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa, at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.
Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - VKG- und MKG-Kupplungen für die Gassammelleitung
Diese Europäische Norm behandelt Ausrüstungen, die verwendet werden, um eine gasdichte Verbindung
zwischen dem Transporttank und den stationären Befüll- und Entladeeinrichtungen herzustellen.
In dieser Europäischen Norm sind die Leistungsanforderungen und die wesentlichen Maße der VKGKupplung
am Transporttank und der MKG-Kupplung am Rohrleitungssystem der stationären Befüll- und
Entladeeinrichtungen festgelegt. Weiterhin sind die Prüfungen festgelegt, mit denen nachgewiesen werden
kann, ob die Ausrüstung den Anforderungen dieser Norm entspricht. Die in dieser Europäischen Norm
beschriebene Ausrüstung ist zum Umfüllen flüssiger Erdölerzeugnisse und anderer gefährlicher Güter der
Klasse 3 des ADR [2] geeignet, deren Dampfdruck bei 50 °C max. 110 kPa beträgt (einschließlich Ottokraftstoff)
und die nicht als giftig oder ätzend eingestuft sind.
Citernes de transport de matières dangereuses - Equipement de service pour citernes - Adaptateur et coupleur pour la récupération des vapeurs
La présente Norme européenne traite de l’adaptateur et du coupleur pour la récupération des vapeurs utilisés
pour l’établissement d’un circuit étanche aux vapeurs entre la citerne de transport et les installations fixes de
chargement et de déchargement.
La présente Norme européenne spécifie les performances requises et les dimensions essentielles de
l’adaptateur pour la récupération des vapeurs monté sur la citerne et du coupleur correspondant monté sur le
flexible ou sur le tuyau de raccordement de l’installation fixe de chargement et de déchargement. Elle spécifie
également les essais à réaliser pour vérifier la conformité des équipements à cette norme. Les équipements
spécifiés dans la présente Norme européenne conviennent à une utilisation avec des produits pétroliers
liquides et d’autres matières dangereuses de la classe 3 de l’ADR [2] dont la tension de vapeur ne dépasse
pas 110 kPa à 50 °C (y compris l’essence) et qui n’appartiennent à aucune sous classification des produits
toxiques ou corrosifs.
Posode za prevoz nevarnih snovi - Oprema za oskrbovanje rezervoarjev - Spojka za zbiralnik pare
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Rezervoarji za prevoz nevarnega blaga - Oprema za oskrbovanje rezervoarjev - Spojka za zbiralnik pareTanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - VKG- und MKG-Kupplungen für die GassammelleitungCiternes de transport de matieres dangereuses - Equipement de service pour citernes - Adaptateur et coupleur pour la récupération des vapeursTanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler23.040.60Prirobnice, oglavki in spojni elementiFlanges, couplings and joints23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 13081:2008SIST EN 13081:2009en,fr,de01-april-2009SIST EN 13081:2009SLOVENSKI
STANDARDSIST EN 13081:20021DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13081November 2008ICS 13.300; 23.020.20; 23.040.60Supersedes EN 13081:2001
English VersionTanks for transport of dangerous goods - Service equipment fortanks - Vapour collection adaptor and couplerCiternes de transport de matières dangereuses -Equipement de service pour citernes - Adaptateur etcoupleur pour la récupération des vapeursTanks für die Beförderung gefährlicher Güter -Bedienungsausrüstung von Tanks - VKG- und MKG-Kupplungen für die GassammelleitungThis European Standard was approved by CEN on 13 September 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13081:2008: ESIST EN 13081:2009
Vapour collection adaptor to be fitted on the transport tank.11 Annex B (normative)
Vapour collection coupler to be fitted to the stationary loading and unloading facility.12 Annex C (normative)
Interlock and other devices.13 C.1 Interlock.13 C.2 DTQM tank identifier.14 Annex D (informative)
4 hole fixing.15 Bibliography.16
3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 Maximum Working Pressure (MWP) gauge pressure maximum pressure to which the equipment is designed to operate, being the highest of the following three pressures: a) highest effective pressure allowed in the tank during filling (maximum filling pressure allowed) b) highest effective pressure allowed in the tank during discharge (maximum discharge pressure allowed) c) effective gauge pressure to which the tank is subjected by its contents (including such extraneous gases as it may contain) at the maximum working temperature SIST EN 13081:2009
The vapour collection adaptor may have provision for a sight glass to check for the presence of liquid. The vapour collection adaptor may have provision for the drainage of liquid. 5 Design characteristics 5.1 General The vapour collection adaptor and coupler shall permit the transfer of vapour only after initiation of the mating action. 5.2 Performance characteristics The manufacturer shall provide the pressure drop curves for both the vapour collection adaptor and coupler at the following conditions: flow rate up to 1 500 standard m3/h of air at 20 °C (1 500 standard m3/h of a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.