EN 13126-17:2019

SLOVENSKI STANDARD
01-julij-2019
Nadomešča:
SIST EN 13126-17:2008
Stavbno okovje - Okovje za okna in zastekljena vrata - Zahteve in preskusne
metode - 17. del: Okovje za nagibno-drsna okna in vrata
Building hardware - Hardware for windows and door height windows - Requirements and
test methods - Part 17: Hardware for Tilt and Slide windows
Baubeschläge - Beschläge für Fenster und Fenstertüren - Anforderungen und
Prüfverfahren - Teil 17: Beschläge für Kippschiebe-Fenster und -Fenstertüren
Quincaillerie pour le bâtiment - Ferrures de fenêtres et portes-fenêtres - Exigences et
méthodes d'essai - Partie 17 : Ferrures pour fenêtres oscillo-coulissantes
Ta slovenski standard je istoveten z: EN 13126-17:2019
ICS:
91.190 Stavbna oprema Building accessories
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 13126-17
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2019
EUROPÄISCHE NORM
ICS 91.190 Supersedes EN 13126-17:2008
English Version
Building hardware - Hardware for windows and door
height windows - Requirements and test methods - Part
17: Hardware for Tilt and Slide windows
Quincaillerie pour le bâtiment - Ferrures de fenêtres et Baubeschläge - Beschläge für Fenster und Fenstertüren
portes-fenêtres - Exigences et méthodes d'essai - Partie - Anforderungen und Prüfverfahren - Teil 17:
17 : Ferrures pour fenêtres oscillo-coulissantes Beschläge für Kippschiebe-Fenster und -Fenstertüren
This European Standard was approved by CEN on 8 March 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13126-17:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Classification . 9
4.1 General . 9
4.2 Durability (1 – first box) . 9
4.3 Mass (2 – second box) . 9
4.4 Corrosion resistance (3 – third box) . 9
4.5 Test sizes (4 – fourth box) . 9
4.6 Example of classification . 10
5 Requirements . 11
5.1 Dangerous substances . 11
5.2 Additional requirements . 11
5.2.1 Handle operation tolerance . 11
5.2.2 Locking point variable tolerance . 12
5.2.3 Sliding operation crash-tests . 13
5.2.4 Minimum closing device resistance . 13
5.2.5 Resistance to additional loading . 13
5.2.6 Static endurance test at ambient temperature . 13
5.3 Durability . 13
5.4 Corrosion resistance . 14
6 Test equipment and preraration for the test . 14
6.1 Test rig . 14
6.2 Specimen . 14
6.3 Mounting of specimen . 15
7 Test procedure . 15
7.1 Samples . 15
7.2 Procedure. 15
7.2.1 General . 15
7.2.2 Adjusting the test mass . 16
7.2.3 Lubrication and adjustment of hardware . 16
7.3 Durability test. 16
7.3.1 Description of the cycles . 16
7.3.2 Acceptance criteria . 21
7.4 Sliding operation crash-tests . 21
7.4.1 Procedure – into the tilted position . 21
7.4.2 Procedure - into the opening position . 21
7.4.3 Acceptance criteria . 22
7.5 Minimum closing device resistance test . 22
7.5.1 Hardware without positive control . 22
7.5.2 Hardware with positive control . 22
7.6 Additional loading test . 23
7.6.1 Procedure. 23
7.6.2 Acceptance criteria . 23
7.7 Static endurance test at ambient temperature . 23
7.8 Corrosion resistance. 23
8 Marking . 24
Annex A (informative) Test assembly . 25
Annex B (informative) Flow chart of test procedure . 30
Annex C (informative) Window types . 31
Bibliography . 32

European foreword
This document (EN 13126-17:2019) has been prepared by Technical Committee CEN/TC 33 “Doors,
windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2019, and conflicting national standards shall
be withdrawn at the latest by October 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13126-17:2008.
With regard to EN 13126-17:2008, the following significant changes were made:
— EN 13126-17 now is independent from EN 13126-1; all necessary information is included without
the need of any further information from EN 13126-1;
— several editorial changes in the wording for a better understanding;
— new terms and definitions added under 3.12 - 3.17;
— under 4.1 classification system changed completely; former digits 1 (Category of use), 4 (Fire
resistance), 5 (Safety in use), 7 (Security) and 8 (Applicable part) deleted; former digit 2 changed
into box 1 (Durability), former digit 3 changed into box 2 (Mass), former digit 6 changed into box 3
(Corrosion resistance) and former digit 9 changed into box 4 (Test sizes);
— under 4.2 new grades for the number of cycles defined; H1 (5 000), H2 (10 000) and H3 (20 000);
— under 4.6 new example of classification added in accordance with the new classification system; 2
alternative ways (table or alphanumerical) to show the classification defined;
— under Clause 6 “Test equipment and preparation for the test” additional information added for the
test rig (6.1), the specimen (6.2) and the mounting of the specimen (6.3);
— under 6.2 “Specimen” the use of gaskets added in the description instead of the prior counteracting
force of 20 N per locking point
— under 7.2 “Procedure” new subclause 7.2.1 “General”, 7.2.2 ”Adjusting the test mass” and 7.2.3
”Lubrication and adjustment of hardware” added with additional information, mainly from the
current version of part 1;
— under 7.3 “Durability test” procedure modified to ensure better correlation with the test procedure
described in EN 1191:2012;
— under 8 new clause added regarding marking with information from the current version of
EN 13126-1;
This European standard is one of a series of European standards for building hardware products for
windows and door height windows. This European standard is independent of EN 13126-1.
EN 13126 consists of the following parts:
— Building hardware — Hardware for windows and door height windows — Requirements and test
methods — Part 1: Requirements common to all types of hardware;
— Building hardware — Requirements and test methods for windows and doors height windows — Part
2: Window fastener handles;
— Building hardware — Hardware for windows and door-height windows — Requir
...