EN 12467:2012+A2:2018
(Main + Amendment)Fibre-cement flat sheets - Product specification and test methods
Fibre-cement flat sheets - Product specification and test methods
This European Standard specifies the technical requirements and establishes methods of inspection and test as well as acceptance conditions for fibre-cement flat sheets, siding shingles and planks (referred to as sheets later in this document) for one or more of the following uses:
- internal wall and ceiling finishes;
- external wall and ceiling finishes.
Products covered by this European Standard can be used for other purposes provided they comply with the relevant application standard, e.g. rigid underlays.
This European Standard covers sheets reinforced with fibres of different types as specified in 5.1.1.
This European Standard does not cover sheets for fire protection purposes.
This European Standard does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed sheets.
Faserzement-Tafeln - Produktspezifikation und Prüfverfahren
Diese Europäische Norm legt die technischen Anforderungen an und die Verfahren zur Kontrolle und Prüfung sowie die Abnahmebedingungen für Faserzement Tafeln, Fassadenschindeln und Schalungen (nachfolgend in diesem Dokument als Tafeln bezeichnet) für einen oder mehrere der folgenden Verwendungszwecke fest:
- Wand und Deckenbekleidungen für Innenräume;
- Wand und Deckenbekleidungen für den Außenbereich.
Produkte, die unter diese Europäische Norm fallen, können auch für andere Zwecke eingesetzt werden, voraus¬gesetzt, dass sie mit der betreffenden Anwendungsnorm übereinstimmen, z. B. steife Unterdeckplatten.
Diese Europäische Norm erstreckt sich auf Tafeln, die mit Fasern unterschiedlicher Art, wie in 5.1.1 festgelegt, bewehrt sind.
Diese Europäische Norm gilt nicht für Tafeln, die für den Brandschutz vorgesehen
Diese Europäische Norm keine Berechnungen zu Bauleistungen, Anforderungen an die Ausführung, Verlege /Einbauverfahren, Windsogsicherheit oder Regensicherheit der verlegten/eingebauten Tafeln.
Plaques planes en fibres-ciment - Spécifications du produit et méthodes d'essai
La présente Norme européenne spécifie les exigences techniques et détermine les méthodes de contrôle et d'essai ainsi que les conditions d'acceptation pour les plaques planes en fibres- ciment, bardeaux et clins (dénommés ci-après « plaques ») pour une ou plusieurs des applications suivantes :
- revêtements intérieurs pour murs et plafonds ;
- revêtements extérieurs pour murs et plafonds.
Les produits couverts par la présente Norme européenne peuvent être utilisés pour d'autres applications à la condition que celles-ci soient conformes à la norme, par exemple comme substrats rigides.
La présente Norme européenne s'applique aux plaques renforcées par des fibres de différents types comme spécifié en 5.1.1.
La présente Norme européenne ne s'applique pas aux plaques conçues pour la protection contre le feu.
La présente Norme européenne n'inclut pas les calculs relatifs aux travaux, aux exigences de conception, aux techniques de pose, aux soulèvements par le vent ou à l'étanchéité à la pluie des produits déjà posés.
Vlaknato-cementne ravne plošče - Specifikacija za izdelek in preskusne metode
Ta evropski standard določa tehnične zahteve in metode za pregled ter preskusne metode in pogoje za sprejem za vlaknato-cementne ravne plošče, fasadne skodle in deske (v nadaljnjem besedilu plošče) za eno ali več navedenih vrst uporabe:
– zaključke notranjih sten in stropov;
– zaključke zunanjih sten in stropov.
Izdelke, zajete v tem evropskem standardu, je mogoče uporabiti za druge namene v skladu z ustreznim standardom o uporabi (npr. toge podložne folije).
Ta evropski standard zajema plošče, ojačane z različnimi vrstami vlaken, kot je določeno v točki 5.1.1.
Ta evropski standard ne zajema plošč za namene protipožarne zaščite.
Ta evropski standard ne vključuje izračunov v zvezi z izdelavo, oblikovnih zahtev, montažnih tehnik in preverjanja odpornosti nameščenih plošč proti vetru ali dežju.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Faserzement-Tafeln - Produktspezifikation und PrüfverfahrenPlaques planes en fibres-ciment - Spécifications du produit et méthodes d'essaiFibre-cement flat sheets - Product specification and test methods91.100.40YODNQLProducts in fibre-reinforced cementICS:Ta slovenski standard je istoveten z:EN 12467:2012+A2:2018SIST EN 12467:2013+A2:2018en,fr,de01-junij-2018SIST EN 12467:2013+A2:2018SLOVENSKI
STANDARDSIST EN 12467:2013+A1:20161DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12467:2012+A2
April
t r s z ICS
{ sä s r rä v r Supersedes EN
s t v x yã t r s t ªA sã t r s xEnglish Version
Fibreæcement flat sheets æ Product specification and test methods Plaques planes en fibresæciment æ Spécifications du produit et méthodes d 5essai
FaserzementæTafeln æ Produktspezifikation und Prüfverfahren This European Standard was approved by CEN on
t v November
t r s w and includes Amendment
t approved by CEN on
{ November
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s t v x yã t r s t ªA tã t r s z ESIST EN 12467:2013+A2:2018
European foreword . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 7 4 Symbols and abbreviations . 8 5 Requirements . 9 5.1 General . 9 5.1.1 Composition . 9 5.1.2 Appearance and finish . 9 5.2 Classification . 10 5.2.1 General . 10 5.2.2 Category A . 10 5.2.3 Category B . 10 5.2.4 Category C . 10 5.2.5 Category D . 10 5.2.6 Groups of sizes . 10 5.3 Dimensions and tolerances . 10 5.3.1 General . 10 5.3.2 Nominal length and width . 10 5.3.3 Thickness . 11 5.3.4 Tolerances on nominal dimensions . 11 5.3.5 Tolerances on shape . 12 5.4 Physical requirements and characteristics . 12 5.4.1 General . 12 5.4.2 Apparent density . 13 5.4.3 Moisture movement . 13 5.4.4 Mechanical characteristics – Bending strength (MOR) – Modulus of elasticity (MOE) . 13 5.4.5 Water impermeability for Categories A, B and D . 14 5.4.6 Water vapour permeability for Category D . 14 5.5 Durability requirements . 14 5.5.1 General . 14 5.5.2 Freeze-thaw for Categories A, B and D . 14 5.5.3 Heat-rain for Categories A and B . 14 5.5.4 Warm water for Categories A, B, C and D . 14 5.5.5 Soak-dry for Categories A, B , C and D . 14 5.6 Fire and safety . 14 5.6.1 Reaction to fire . 14 5.6.2 Release of dangerous substances . 15 5.7 Product information . 15 6 !Assessment and verification of constancy of performance — AVCP . 15 6.1 General . 15 6.2 Type testing . 16 6.2.1 General . 16 6.2.2 Test samples, testing and compliance criteria . 17 6.2.3 Test reports . 17 SIST EN 12467:2013+A2:2018
(E) 3 6.3 Factory production control (FPC) . 17 6.3.1 General . 17 6.3.2 Requirements . 18 6.3.3 Product specific requirements . 20 6.3.4 Initial inspection of factory and of FPC . 21 6.3.5 Continuous surveillance of FPC . 21 6.3.6 Procedure for modifications . 21 6.4 Inspection of a consignment of finished products . 22 7 Test methods . 22 7.1 General . 22 7.2 Dimensional and geometrical tests . 22 7.2.1 Preparation of specimen . 22 7.2.2 Apparatus . 22 7.2.3 Procedure . 22 7.2.4 Expression and interpretation of results . 25 7.3 Tests for physical performance and characteristics . 26 7.3.1 Apparent density . 26 7.3.2 Mechanical characteristics - Bending strength – Modulus of elasticity (Bending modulus) . 26 7.3.3 Water impermeability . 31 7.3.4 Water vapour permeability . 32 7.3.5 Warm water . 32 7.3.6 Soak-dry . 33 7.3.7 Moisture movement test . 34 7.4 Tests for climatic performance. 34 7.4.1 Freeze-thaw . 34 7.4.2 Heat-rain . 36 7.5 Test for reaction to fire performance . 37 7.5.1 Sheets satisfying the requirements for the fire reaction Class A1 without the need for testing . 37 7.5.2 Other sheets . 37 8 Marking, labelling and packaging . 45 Annex A (normative)
Consignment inspection sampling . 46 Annex B (normative)
Statistical method for determining the corresponding wet values or revised dry specifications for the MOR when carrying out the dry method of test or when tested prior to coating for quality control purposes . 47 B.1 Procedure .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.