EN ISO 10855-3:2018

SLOVENSKI STANDARD
01-oktober-2018
1DGRPHãþD
SIST EN 12079-3:2007
3ODYDMRþHNRQWHMQHUVNHHQRWHLQ]QMLPLSRYH]DQGYLåQLSULERUGHO3HULRGLþQL
QDG]RUSUHJOHGLQSUHVNXãDQMH,62
Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination
and testing (ISO 10855-3:2018)
Offshore container - Teil 3: Wiederkehrende Kontrolle, Inspektion und Prüfung (ISO
10855-3:2018)
Containers offshore - Partie 3: Inspection périodique, examen et test (ISO 10855-3:2018)
Ta slovenski standard je istoveten z: EN ISO 10855-3:2018
ICS:
55.180.10 9HþQDPHQVNLNRQWHMQHUML General purpose containers
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 10855-3
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2018
EUROPÄISCHE NORM
ICS 75.180.10 Supersedes EN 12079-3:2006
English Version
Offshore containers and associated lifting sets - Part 3:
Periodic inspection, examination and testing (ISO 10855-
3:2018)
Containeurs offshore et dispositifs de levage associés - Offshore-Container und dazugehörige
Partie 3: Inspection périodique, examen et test (ISO Anschlaggarnituren - Teil 3: Wiederkehrende
10855-3:2018) Kontrolle, Inspektion und Prüfung (ISO 10855-3:2018)
This European Standard was approved by CEN on 30 April 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10855-3:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 10855-3:2018) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries"
in collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures
for petroleum, petrochemical and natural gas industries” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2019, and conflicting national standards shall
be withdrawn at the latest by January 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12079-3:2006.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10855-3:2018 has been approved by CEN as EN ISO 10855-3:2018 without any
modification.
INTERNATIONAL ISO
STANDARD 10855-3
First edition
2018-05
Offshore containers and associated
lifting sets —
Part 3:
Periodic inspection, examination and
testing
Containeurs offshore et dispositifs de levage associés —
Partie 3: Inspection périodique, examen et test
Reference number
ISO 10855-3:2018(E)
©
ISO 2018
ISO 10855-3:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

ISO 10855-3:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Symbols . 2
5 Container inspection plate . 3
5.1 General . 3
5.2 Contents of inspection plate . 3
6 Schedule of periodic inspection/examination and test — Containers.4
7 Container lifting test . 4
7.1 General . 4
7.2 Test equipment and calibration. 5
8 Non-destructive examination (NDE) of welds . 5
8.1 General . 5
8.2 NDE methods . 5
8.3 Use of Eddy Current Testing at periodic inspections . 5
8.4 NDE operators . 6
9 Visual inspection . 6
9.1 General . 6
9.2 Markings . 6
9.3 Welds . 6
9.4 Pad eyes and lashing points . 6
9.5 Structure . 6
9.6 Door closures. 7
9.7 Floor . 7
10 Marking of the inspection plate . 7
11 Inspection report . 7
12 Record keeping . 8
13 Damage and repair procedures . 8
14 Schedule of inspection/examination and test — Lifting sets . 8
15 Inspection of attachment of lifting set to an offshore container .11
15.1 Attachment .11
15.2 Inspection report .11
15.3 Record keeping .11
16 Pre-trip inspections .12
Annex A (informative) Regulations for offshore containers .13
Annex B (informative) Recommended knowledge and experience of staff responsible for
inspection of offshore containers .15
Annex C (informative) Recommended knowledge and experience of staff responsible for
inspection of lifting sets intended for use with offshore containers .16
Bibliography .17
ISO 10855-3:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing Inter
...