EN 29454-1:1993
(Main)Soft soldering fluxes - Classification and requirements - Part 1: Classification, labelling and packaging (ISO 9454-1:1990)
Soft soldering fluxes - Classification and requirements - Part 1: Classification, labelling and packaging (ISO 9454-1:1990)
Specifies a coding system for the classification of fluxes intended for use with soft solders, according to their active fluxing ingredients, together with requirements for labelling and packaging. Annex A tabulates the testing of fluxes.
Flußmittel zum Weichlöten - Einteilung und Anforderungen - Teil 1: Einteilung, Kennzeichnung und Verpackung (ISO 9454-1:1990)
Dieser Teil von ISO 9454 legt ein Kurzzeichen-System zur Einteilung von Flussmitteln für Weichlote nach ihren aktiven Flussmitelbestandteilen sowie Anforderungen für die Kennzeichnung und die Verpackung fest.
Flux de brasage tendre - Classification et caractéristiques - Partie 1: Classification, marquage et emballage (ISO 9454-1:1990)
La présente partie de l'ISO 9454 prescrit une classification codée des flux utilisables en brasage tendre, en fonction des ingrédients actifs qu'ils contiennent, conjointement avec les caractéristiques pour le marquage et l'emballage. AVERTISSEMENT -- La présente partie de l'ISO 9454 traite de produits qui peuvent être dangereux pour la santé ou peuvent engendrer des risques d'autre nature (corrosion, incendie, etc.) si des précautions appropriées ne sont pas prises lors de leur emploi. Elle ne prend en considération que l'aptitude technique à l'emploi des substances et ne dispense en aucun cas le laboratoire d'essai, le fournisseur ou l'utilisateur, des obligations que lui impose la loi en matière d'hygiène et de sécurité à tous les stades de la fabrication ou de l'emploi de ces flux.
Talila za mehko spajkanje - Klasifikacija in zahteve - 1. del: Klasifikacija, označevanje in pakiranje (ISO 9454-1:1990)
General Information
- Status
- Withdrawn
- Publication Date
- 18-Nov-1993
- Withdrawal Date
- 08-Feb-2026
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121 - Welding
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 09-Mar-2016
- Completion Date
- 09-Feb-2026
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 08-Jun-2022
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 28-Jan-2026
EN 29454-1:1998
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 29454-1:1993 is a standard + national annex and/or foreword published by the European Committee for Standardization (CEN). Its full title is "Soft soldering fluxes - Classification and requirements - Part 1: Classification, labelling and packaging (ISO 9454-1:1990)". This standard covers: Specifies a coding system for the classification of fluxes intended for use with soft solders, according to their active fluxing ingredients, together with requirements for labelling and packaging. Annex A tabulates the testing of fluxes.
Specifies a coding system for the classification of fluxes intended for use with soft solders, according to their active fluxing ingredients, together with requirements for labelling and packaging. Annex A tabulates the testing of fluxes.
EN 29454-1:1993 is classified under the following ICS (International Classification for Standards) categories: 25.160.50 - Brazing and soldering. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 29454-1:1993 has the following relationships with other standards: It is inter standard links to EN ISO 9454-1:2016, EN 61191-1:1998, EN 61190-1-3:2007, EN 61190-1-3:2002, EN 60068-2-69:1996, EN 806-4:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 29454-1:1993 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 29454-1:1993 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...