EN 2607:2005
(Main)Aerospace series - O-rings for adaptors, threaded, with lockring - Survey
Aerospace series - O-rings for adaptors, threaded, with lockring - Survey
This standard specifies the configuration of adaptors, threaded, with lockring and the dimensions of O rings.
Luft- und Raumfahrt - O-Ringe für gerade Einschraubverschraubungen mit Sicherungsring - Übersicht
Diese Norm legt die Ausführung von geraden Einschraubverschraubungen mit Sicherungsring sowie die Maße der O Ringe fest.
Série aérospatiale - Joints toriques pour raccords droits, filetés, avec bague de sécurité - Configuration
Aeronavtika – O-obročki za adapterje, z navojem, z zaklepnim obročkom – Pregled
General Information
- Status
- Published
- Publication Date
- 06-Dec-2005
- Withdrawal Date
- 29-Jun-2006
- Technical Committee
- ASD-STAN - Aerospace
- Drafting Committee
- ASD-STAN/D 3 - Mechanical
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 07-Dec-2005
- Completion Date
- 07-Dec-2005
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
EN 2607:2005 is a European standard developed by CEN that specifies the configuration and dimensional requirements for O-rings used in aerospace threaded adaptors equipped with lockrings. This aerospace series standard ensures uniformity and compatibility in the design and application of O-rings for these specific mechanical connections, which are critical for maintaining sealing integrity in aerospace fluid systems.
This document is essential for manufacturers, engineers, and quality assurance professionals involved in aerospace component design and maintenance, providing standardized guidance to enhance reliability and safety in aerospace hydraulic and pneumatic systems.
Key Topics
Scope and Purpose
EN 2607:2005 focuses on defining the exact dimensions and configuration of O-rings used with threaded adaptors fitted with lockrings in aerospace applications.Configuration Details
The standard outlines the geometric configuration of the adaptors, including the interface specifications corresponding to different geometries like 8°30’, 24°, and 60° angles.Dimensional Specifications
Detailed measurements such as nominal size, tolerances, and size identification codes are provided in millimeters to ensure precise manufacturing and interchangeability. Dimensions align with referenced aerospace series standards EN 2602 to EN 2606 and EN 2645 for port and lockring configurations.Normative References
EN 2607 relies on associated standards including ISO 3601-1, which governs O-ring inside diameters and cross sections, and multiple EN 260x series standards that describe adaptor port configurations and lockring dimensions.Assembly and Installation
The standard references specific installation and removal requirements to ensure correct assembly and maintain sealing performance, referring to EN 2608 for detailed assembly instructions.
Applications
Aerospace Hydraulic and Pneumatic Systems
O-rings specified by EN 2607 are used extensively in aerospace adaptors to secure leak-proof connections in hydraulic lines, fuel systems, and pneumatic controls.Component Manufacturing
Manufacturers of aerospace fluid connectors, adaptors, and sealing components use this standard to design parts compatible with established industry specifications, ensuring interchangeability and regulatory compliance.Maintenance and Inspection
Maintenance teams rely on EN 2607 for selecting the correct O-ring sizes and ensuring that replacements meet exact dimensional criteria, which is crucial for system safety and performance.Quality Control
The standardized dimensions and tolerances aid quality assurance processes during production and inspection of aerospace adaptors and seal components.
Related Standards
ISO 3601-1: Fluid Power Systems - O-Rings
Defines internal diameters, cross-sectional sizes, and tolerances for O-rings, providing dimensional reference points used in EN 2607.EN 2602 to EN 2606: Aerospace Adaptors Series
Detail the geometric configurations of ports and connectors that work in conjunction with O-rings specified in EN 2607.EN 2608: Installation and Removal of Adaptors
Specifies the procedures and requirements for fitting and removing adaptors with lockrings, ensuring proper assembly as referenced in EN 2607.EN 2645: Lockring Dimensions for Aerospace Adaptors
Complementary specifications for lockrings that are integral to securing threaded adaptors.
Keywords
Aerospace O-rings, threaded adaptors, lockring, EN 2607, aerospace sealing standards, hydraulic system seals, pneumatic system connectors, adaptor O-ring dimensions, aerospace fluid connectors, CEN aerospace standards, ISO 3601-1, aerospace maintenance standards, aerospace component design.
EN 2607:2005 plays a crucial role in standardizing the dimensions and configurations of O-rings for aerospace threaded adaptors with lockrings, promoting safety, reliability, and compatibility across European aerospace manufacturing and maintenance sectors.
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
NSF-ISR
NSF International Strategic Registrations.
Orion Registrar Inc.
US-based certification body for management systems.
Sponsored listings
Frequently Asked Questions
EN 2607:2005 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - O-rings for adaptors, threaded, with lockring - Survey". This standard covers: This standard specifies the configuration of adaptors, threaded, with lockring and the dimensions of O rings.
This standard specifies the configuration of adaptors, threaded, with lockring and the dimensions of O rings.
EN 2607:2005 is classified under the following ICS (International Classification for Standards) categories: 49.030.99 - Other fasteners. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 2607:2005 has the following relationships with other standards: It is inter standard links to EN 10169-1:2003, EN 3079:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 2607:2005 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - O-rings for adaptors, threaded, with lockring - SurveySérie aérospatiale - Joints toriques pour raccords droits, filetés, avec bague de sécurité - ConfigurationLuft- und Raumfahrt - O-Ringe für gerade Einschraubverschraubungen mit Sicherungsring - ÜbersichtTa slovenski standard je istoveten z:EN 2607:2005SIST EN 2607:2006en49.030.99ICS:SLOVENSKI
STANDARDSIST EN 2607:200601-september-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2607December 2005ICS 49.030.99 English VersionAerospace series - O-rings for adaptors, threaded, with lockring- SurveySérie aérospatiale - Raccords droits métriques avec baguede sécurité - Configuration - Dimensions des joints toriquesLuft- und Raumfahrt - O-Ringe für geradeEinschraubverschraubungen mit Sicherungsring - ÜbersichtThis European Standard was approved by CEN on 28 October 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2607:2005: E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...