EN 10246-9:2000
(Main)Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections
Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections
This Part of EN 10246 specifies the requirements for the automatic ultrasonic testing of the weld seam of submerged arc-welded (longitudinally or helically) tubes for the detection of imperfections oriented predominantly parallel to and/or at right angles to the weld seam. The standard specifies acceptance levels and calibration procedures. European Standard EN 102 46 "Non-destructive testing of steel tubes" comprises the parts shown in Annex A.
Zerstörungsfreie Prüfung von Stahlrohren - Teil 9: Automatische Ultraschallprüfung der Schweißnaht unterpulvergeschweißter Stahlrohre zum Nachweis von Längs- und/oder Querfehlern
Dieser Teil der EN 10246 legt die Anforderungen an die automatische Ultraschallprüfung der Schweißnaht unterpulvergeschweißter (Längsnaht- oder Spiralnaht-)Rohre zum Nachweis von Fehlern, die vorwiegend parallel und/oder rechtwinklig zur Schweißnaht verlaufen, fest. Die Norm enthält Festlegungen über Zulässigkeitsklassen und die Einstellung der Prüfanlagen. Die Europäische Norm EN 10246 "Zerstörungsfreie Prüfung von Stahlrohren" besteht aus den in Anhang A angegebenen Teilen.
Essais non destructifs des tubes en acier - Partie 9: Contrôle automatique par ultrasons du cordon de soudure pour la détection des imperfections longitudinales et/ou transversales des tubes soudés à l'arc immergé sous flux en poudre
La présente partie de l'EN 10246 spécifie les prescriptions relatives aux contrôle automatique par ultrasons du cordon de soudure des tubes soudés à l'arc immergé sous flux en poudre (longitudinalement ou hélicoïdalement) pour la détection des imperfections principalement orientées parallèlement et/ou perpendiculairement au cordon de soudure. La norme spécifie les niveaux de sévérité et les procédures d'étalonnage. Les parties de la norme européenne EN 10246 "Essais non destructifs des tubes en acier" sont données en annexe A.
Neporušitveno preskušanje jeklenih cevi - 9. del: Ugotavljanje vzdolžnih in/ali prečnih napak vara pri jeklenih ceveh, obločno varjenih pod praškom, z avtomatsko ultrazvočno preiskavo
General Information
- Status
- Withdrawn
- Publication Date
- 15-Feb-2000
- Withdrawal Date
- 31-Mar-2011
- Technical Committee
- ECISS/TC 110 - Steel tubes, and iron and steel fittings
- Drafting Committee
- ECISS/TC 29/SC 10 - Non-destructive testing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Apr-2011
- Completion Date
- 01-Apr-2011
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 10246-9:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections". This standard covers: This Part of EN 10246 specifies the requirements for the automatic ultrasonic testing of the weld seam of submerged arc-welded (longitudinally or helically) tubes for the detection of imperfections oriented predominantly parallel to and/or at right angles to the weld seam. The standard specifies acceptance levels and calibration procedures. European Standard EN 102 46 "Non-destructive testing of steel tubes" comprises the parts shown in Annex A.
This Part of EN 10246 specifies the requirements for the automatic ultrasonic testing of the weld seam of submerged arc-welded (longitudinally or helically) tubes for the detection of imperfections oriented predominantly parallel to and/or at right angles to the weld seam. The standard specifies acceptance levels and calibration procedures. European Standard EN 102 46 "Non-destructive testing of steel tubes" comprises the parts shown in Annex A.
EN 10246-9:2000 is classified under the following ICS (International Classification for Standards) categories: 23.040.10 - Iron and steel pipes; 25.160.40 - Welded joints and welds; 77.040.20 - Non-destructive testing of metals. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10246-9:2000 has the following relationships with other standards: It is inter standard links to EN ISO 10893-11:2011, EN 14276-2:2007+A1:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10246-9:2000 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/005, M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10246-9:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zerstörungsfreie Prüfung von Stahlrohren - Teil 9: Automatische Ultraschallprüfung der Schweißnaht unterpulvergeschweißter Stahlrohre zum Nachweis von Längs- und/oder QuerfehlernEssais non destructifs des tubes en acier - Partie 9: Contrôle automatique par ultrasons du cordon de soudure pour la détection des imperfections longitudinales et/ou transversales des tubes soudés a l'arc immergé sous flux en poudreNon-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes f
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...