EN 1253-1:2003
(Main)Gullies for buildings - Part 1: Requirements
Gullies for buildings - Part 1: Requirements
This standard classifies gullies, gives guidance for places of installation and specifies require-ments for the con-struction, design, perfor-man-ce and mar-king of factory made gullies for buildings, irrespective of material, for use in drainage systems operating under gravity including siphonic systems.
NOTE Although normally used to convey domestic wastewater, industrial wastewater and rainwa-ter, gullies can convey other wastewater provi-ded there is no risk of damage to components or of injury to health.
This standard does not apply to gully tops and manhole tops which are speci-fied in EN 124:1994.
Abläufe für Gebäude - Teil 1: Anforderungen
Avaloirs et siphons pour bâtiments - Partie 1: Spécifications
Cette norme classifie les avaloirs et les siphons, donne des lignes directrices pour les lieux d'installation et spécifie les exigences concernant la construction, la conception, les performances et le marquage des siphons et des avaloirs pour bâtiments fabriqués en usine, indépendamment des matériaux, destinés à être utilisés dans les réseaux d'évacuation gravitaires et les réseaux d'évacuation siphoïdes (à tuyaux pleins).
NOTE Bien que normalement utilisés pour transporter des eaux usées domestiques et industrielles et de l'eau de pluie, les avaloirs/siphons peuvent transporter d'autres eaux usées à la condition qu'il n'y ait pas de risque d'endommagement des composants ou de danger pour la santé.
Cette norme ne s'applique pas aux dispositifs de fermeture et de couronnement des avaloirs et des siphons qui font l'objet de l'EN 124.
Hišni žlebovi – 1. del: Zahteve
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hišni žlebovi – 1. del: ZahteveAbläufe für Gebäude - Teil 1: AnforderungenAvaloirs et siphons pour bâtiments - Partie 1: SpécificationsGullies for buildings - Part 1: Requirements91.140.80Drenažni sistemiDrainage systemsICS:Ta slovenski standard je istoveten z:EN 1253-1:2003SIST EN 1253-1:2003en01-oktober-2003SIST EN 1253-1:2003SLOVENSKI
STANDARDSIST EN 1253-1:20001DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1253-1May 2003ICS 91.140.80Supersedes EN 1253-1:1999English versionGullies for buildings - Part 1: RequirementsAvaloirs et siphons pour bâtiments - Partie 1:SpécificationsAbläufe für Gebäude - Teil 1: AnforderungenThis European Standard was approved by CEN on 20 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1253-1:2003 ESIST EN 1253-1:2003
A-Deviation.15SIST EN 1253-1:2003
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.