EN 12004:2007

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.R]QDþHYDQMHMörtel und Klebstoffe für Fliesen und Platten - Anforderungen, Konformitätsbewertung, Klassifizierung und BezeichnungColles a carrelage - Exigences, évaluation de la conformité, classification et désignationAdhesives for tiles - Requirements, evaluation of conformity, classification and designation91.100.23Ceramic tiles91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. Mortar83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 12004:2007SIST EN 12004:2007en01-oktober-2007SIST EN 12004:2007SLOVENSKI
STANDARDSIST EN 12004:2002/A1:2002/AC:2002SIST EN 12004:2002/A1:2002SIST EN 12004:20021DGRPHãþD

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12004August 2007ICS 83.180; 91.100.10Supersedes EN 12004:2001
English VersionAdhesives for tiles - Requirements, evaluation of conformity,classification and designationColles à carrelage - Exigences, évaluation de la conformité,classification et désignationMörtel und Klebstoffe für Fliesen und Platten -Anforderungen, Konformitätsbewertung, Klassifizierung undBezeichnungThis European Standard was approved by CEN on 4 February 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12004:2007: ESIST EN 12004:2007

Failure patterns.17 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive.18 ZA.1 Scope and relevant characteristics.18 ZA.2 Procedures for the attestation of conformity of adhesives for tiles.20 ZA.2.1 System of attestation of conformity.20 ZA.2.2 EC Declaration of conformity.21 ZA.3 CE marking and labelling.21
EN 1308, Adhesives for tiles – Determination of slip EN 1324:2007, Adhesives for tiles – Determination of shear adhesion strength of dispersion adhesives EN 1346, Adhesives for tiles – Determination of open time EN 1347, Adhesives for tiles – Determination of wetting capability EN 1348:2007, Adhesives for tiles – Determination of tensile adhesion strength for cementitious adhesives EN 12002, Adhesives for tiles – Determination of transverse deformation for cementitious adhesives and grouts EN 12003:1997, Adhesives for tiles – Determination of shear adhesion strength of reaction resin adhesives EN 12808-1, Adhesives and grouts for tiles – Part 1: Determination of chemical resistance of reaction resin mortars EN 13501-1, Fire classification of construction products and building elements – Part 1: Classification using
data from reaction to fire tests
NOTE The adhesive is usually applied with a trowel to obtain a layer and then combed with a notched trowel to achieve the right thickness and planarity 3.1.2 fixing surface plane rigid surface upon which the tile is fixed 3.1.3 wall and floor tiles tiles made out of ceramic or natural and agglomerated stones 3.2 Products 3.2.1 cementitious adhesive mixture of hydraulic binding agents, aggregates, and organic additives
NOTE 1 The adhesives are mixed with water or liquid admix just before use. NOTE 2 Cementitious adhesives are designated as type C. 3.2.2 dispersion adhesive mixture of organic binding agent(s) in the form of an aqueous polymer dispersion, organic additives and mineral fillers
NOTE 1 The mixture is ready for use NOTE 2 Dispersion adhesives are designated as type D. 3.2.3 reaction resin adhesive mixture of synthetic resin, mineral fillers and organic additives in which hardening occurs by chemical reaction
NOTE 1 They are available in one or more component forms NOTE 2 reaction resin adhesive are designated as type R 3.3 Tools and working methods 3.3.1 notched trowel toothed tool, which makes it possible to apply the adhesive as a series of ribs of a uniform thickness onto the fixing surface and/or the reverse face of the tile SIST EN 12004:2007

NOTE The tiles are then fixed before a film forms on the surface of the adhesive 3.3.3 application to both surfaces, Floating and buttering method adhesive applied to the fixing surface and to the reverse of the tiles NOTE The combined layer of adhesive should not exceed the maximum recommended thickness. The tiles are then fixed before a film forms on the surface of the adhesive 3.4 Application properties 3.4.1 shelf life time of storage under stated conditions during which an adhesive is expected to maintain its working properties 3.4.2 maturing time interval between the time when the cementitious adhesive is mixed and the time when it is ready for use 3.4.3 pot-life maximum time interval during which the adhesive can be used after mixing 3.4.4 open time maximum interval after application at which tiles can be embedded in the applied adhesive and meet the specified tensile adhesion strength requirement
NOTE Open time is measured by the method described in EN 1346 3.4.5 wetting capability ability of a combed adhesive layer to wet the tile
NOTE Wetting capability is measured by the method described in EN 1347 3.4.6 slip downward movement of a tile applied to a combed adhesive layer on a vertical or inclined surface NOTE Slip is measured by the method described in EN 1308 3.4.7 adjustability maximum time interval after which the tile’s position in the adhesive layer can be adjusted without significant loss of adhesion strength 3.5 Final properties 3.5.1 adhesion strength maximum strength per unit surface area which can be measured by shear or tensile testing SIST EN 12004:2007
...