EN ISO 13688:2013
(Main)Protective clothing - General requirements (ISO 13688:2013)
Protective clothing - General requirements (ISO 13688:2013)
ISO 13688:2012 specifies general performance requirements for ergonomics, innocuousness, size designation, ageing, compatibility and marking of protective clothing and the information to be supplied by the manufacturer with the protective clothing.
ISO 13688:2012 is only intended to be used in combination with other standards containing requirements for specific protective performance and not on a stand-alone basis.
Schutzkleidung - Allgemeine Anforderungen (ISO 13688:2013)
Diese Internationale Norm legt allgemeine Leistungsanforderungen an die Ergonomie, die Unschädlichkeit, die Größenbezeichnung, die Alterung, die Verträglichkeit und die Kennzeichnung von Schutzkleidung sowie an die Informationen, die der Hersteller mit der Schutzkleidung mitliefern muss, fest.
Diese Internationale Norm soll nur in Kombination mit anderen Normen angewendet werden, die Anforderungen an spezifische Schutzleistungen enthalten und nicht für sich allein.
Vêtements de protection - Exigences générales (ISO 13688:2013)
L'ISO 13688:2013 spécifie des exigences générales de performance relatives à l'ergonomie, à l'innocuité, à la désignation des tailles, au vieillissement, à la compatibilité et au marquage des vêtements de protection ainsi qu'aux informations devant être fournies par le fabricant avec les vêtements de protection.
L'ISO 13688:2013 est destinée à être utilisée uniquement en association avec d'autres normes contenant les exigences relatives à des performances de protection spécifiques et n'est pas destinée à être appliquée seule.
Varovalna obleka - Splošne zahteve (ISO 13688:2013)
Ta mednarodni standard določa splošne zahteve glede delovanja za ergonomiko, neškodljivost, oznako velikosti, staranje, združljivost in označevanje zaščitnih oblačil ter informacije, ki jih mora proizvajalec priložiti zaščitnim oblačilom. Ta standard se uporablja skupaj z drugimi standardi, ki vsebujejo zahteve za specifično delovanje. Ne uporablja se samostojno.
General Information
Relations
Overview
EN ISO 13688:2013 - Protective clothing - General requirements (ISO 13688:2013) defines the basic, non‑performance-specific requirements for protective clothing. It sets out ergonomics, innocuousness, size designation, ageing, compatibility, marking and the information to be supplied by the manufacturer. This standard is a reference document intended to be used in combination with product‑specific standards (it is not a stand‑alone performance standard).
Keywords: EN ISO 13688:2013, protective clothing, general requirements, PPE, ergonomics, marking.
Key topics and technical requirements
- Ergonomics and comfort: requirements for design and fit to ensure mobility and reduce user fatigue; includes guidance and practical checks (informative Annex C).
- Innocuousness: limits and tests related to harmful substances, surface condition and materials in contact with skin (references to ISO/EN chemical and nickel tests).
- Size designation: standardized sizing system and examples to improve consistent fit and sizing information across garments.
- Ageing and care: requirements for dimensional change and performance after washing, dry‑cleaning and other ageing processes (references to ISO 3071, ISO 5077, ISO 3175).
- Compatibility: guidance on how protective clothing interacts with other PPE items to maintain overall protection.
- Marking and labelling: mandatory marking, pictograms (Annex E), and qualification symbols for industrial laundry care (ISO 30023), plus the information the manufacturer must supply (Clause 8).
- Documentation and manufacturer information: content and format of instructions, care labels, sizing data, performance levels (informative Annex A) and any restrictions of use.
Practical applications and users
EN ISO 13688:2013 is used by:
- Manufacturers and designers of protective clothing to ensure garments meet basic health, ergonomic and labelling requirements before adding hazard‑specific features.
- Test laboratories and conformity assessors as a reference for general checks and for integrating with product‑specific tests.
- Procurement teams and safety managers who need to verify that supplied PPE includes correct marking, sizing and manufacturer information.
- Regulatory and compliance professionals aligning PPE with EU Directive requirements (see Annex ZA on Directive 89/686/EEC).
Practical value: improves user comfort and safety, ensures consistent sizing and labeling, supports compliance and interoperability of PPE ensembles.
Related standards
EN ISO 13688:2013 is intended to be called up by specific protective clothing standards and references normative documents such as ISO 3071, ISO 5077, ISO 3758, ISO 30023 and relevant EN tests (e.g., EN 1811, EN 14362-1). Use EN ISO 13688 alongside hazard‑specific standards for a complete conformity assessment.
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2013
1DGRPHãþD
SIST EN 340:2004
Varovalna obleka - Splošne zahteve (ISO 13688:2013)
Protective clothing - General requirements (ISO 13688:2013)
Schutzkleidung - Allgemeine Anforderungen (ISO 13688:2013)
Vêtements de protection - Exigences générales (ISO 13688:2013)
Ta slovenski standard je istoveten z: EN ISO 13688:2013
ICS:
13.340.10 Varovalna obleka Protective clothing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 13688
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2013
ICS 13.340.10 Supersedes EN 340:2003
English Version
Protective clothing - General requirements (ISO 13688:2013)
Vêtements de protection - Exigences générales (ISO Schutzkleidung - Allgemeine Anforderungen (ISO
13688:2013) 13688:2013)
This European Standard was approved by CEN on 25 April 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13688:2013: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 89/686/EEC .4
Foreword
This document (EN ISO 13688:2013) has been prepared by Technical Committee ISO/TC 94 "Personal safety
- Protective clothing and equipment" in collaboration with Technical Committee CEN/TC 162 “Protective
clothing including hand and arm protection and lifejackets” the secretariat of which is held by DIN
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2014, and conflicting national standards shall be withdrawn at
the latest by January 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 340:2003.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 13688:2013 has been approved by CEN as EN ISO 13688:2013 without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 89/686/EEC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 89/686/EEC on the approximation of the laws of the Member States relating to
personal protective equipment.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the clauses of this
European Standard given in Table ZA.1 confers, within the limits of the scope of this European Standard, a
presumption of conformity with the corresponding Essential Requirements of that Directive and associated
EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Directive 89/686/EEC
Clause(s)/sub-clause(s)
Essential Requirements (ERs) of Directive 89/686/EEC, Annex II
of this EN
5.3 1.2.1. Absence of risks and other inherent nuisance factors
4.2 1.2.1.1. Suitable constituent materials
4.4 1.2.1.2. Satisfactory surface condition of all PPE parts in contact with the user
8 1.4. Information supplied by the manufacturer
6, 7 2.12. PPE bearing one or more identification or recognition marks directly or
indirectly relating to health and safety
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this European Standard.
INTERNATIONAL ISO
STANDARD 13688
Second edition
2013-07-15
Protective clothing — General
requirements
Vêtements de protection — Exigences générales
Reference number
ISO 13688:2013(E)
©
ISO 2013
ISO 13688:2013(E)
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
ISO 13688:2013(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Basic health and ergonomic requirements . 2
4.1 General . 2
4.2 Innocuousness . 3
4.3 Design . 3
4.4 Comfort . 4
5 Ageing . 4
5.1 General . 4
5.2 Washing and dry cleaning . 4
5.3 Dimensional change due to cleaning . 5
6 General size designation . 5
7 Marking . 6
7.1 General . 6
7.2 Specific . 6
8 Information supplied by the manufacturer . 7
Annex A (informative) Performance level . 9
Annex B (informative) Flow chart .10
Annex C (informative) Checking the ergonomic features of protective clothing(Practical
performance tests) .12
Annex D (informative) Examples of size designation .15
Annex E (normative) Pictograms .18
Annex F (informative) Environmental aspects .21
Bibliography .22
ISO 13688:2013(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 13688 was prepared by Technical Committee ISO/TC 94, Personal safety - Protective clothing and
equipment, Subcommittee SC 13, Protective clothing and by Technical Committee CEN/TC 162, Protective
clothing including hand and arm protection and lifejackets in collaboration.
This second edition cancels and replaces the first edition (ISO 13688:1998), which has been technically
revised to include the following changes:
— A statement that this International Standard (and pictogram) is intended to be used in combination
with another product standard was added to the Scope.
— Additional definitions on waist to waist over the shoulder length, and torso.
— Notes on level of performance moved to informative Annex A.
— Clause 4 on ergonomics changed to basic health and ergonomic requirements and revised into
separate sub-sections: general (4.1), innocuousness (4.2), design (4.3) and comfort (4.4).
— Informative Annex C added on ergonomic features.
— Subclause 5.2 on colour fastness removed.
— Subclause 5.3 on cleaning renamed as washing and dry-cleaning (5.2) now includes reference to
standardised processes, including industrial washing.
— Strengthened provisions in 5.3 on dimensional change due to cleaning.
— The size designation system in Clause 6 was simplified with regard to intervals and ranges to allow
more freedom to obtain a better individual fit.
— Subclause 7.2 on specific marking amended to include qualification labelling for industrial laundry care.
— Informative Annex B (Flow chart) added on acceptability of materials.
— Informative Annex F added on environmental aspects.
iv © ISO 2013 – All rights reserved
ISO 13688:2013(E)
Introduction
This International Standard is a reference standard to be called up as appropriate by specific standards.
This International Standard is not intended to be used alone but only in combination with another
standard containing requirements for the specific performance of the product which provides protection.
INTERNATIONAL STANDARD ISO 13688:2013(E)
Protective clothing — General requirements
1 Scope
This International Standard specifies general performance requirements for ergonomics, innocuousness,
size designation, ageing, compatibility and marking of protective clothing and the information to be
supplied by the manufacturer with the protective clothing.
This International Standard is only intended to be used in combination with other standards containing
requirements for specific protective performance and not on a stand-alone basis.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 3071, Textiles — Determination of pH of aqueous extract
ISO 3175-1, Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 1:
Assessment of performance after cleaning and finishing
ISO 3635, Size designation of clothes — Definitions and body measurement procedure
ISO 3758, Textiles — Care labelling code using symbols
ISO 4045, Leather — Chemical tests — Determination of pH
ISO 5077, Textiles — Determination of dimensional change in washing and drying
ISO 7000, Graphical symbols for use on equipment — Registered symbols
ISO 17075, Leather — Chemical tests — Determination of chromium(VI) content
ISO 30023, Textiles — Qualification symbols for labelling workwear to be industrially laundered
EN 1811, Reference test method for release of nickel from products intended to come into direct and
prolonged contact with the skin
EN 14362-1, Textiles — Methods for determination of certain aromatic amines derived from azo colorants —
Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
ageing
change of one or more initial properties of protective clothing materials during the passage of time
ISO 13688:2013(E)
3.2
hazard
situation which can be the cause of harm or damage to the health of the human body
Note 1 to entry: There are different general types of hazards, e. g. mechanical hazards, chemical hazards, cold
hazards, heat and/or fire hazards, biological agents hazards, radiation hazards. Certain types of these hazards
can, according to circumstances, derive from more specific hazards. Thus, a heat hazard can derive from contact
heat, radiant heat etc. for each of which there can be separate test methods.
Particular garments have been designed to give protection against the hazards encountered in specific types
of activities. Examples of such garments are aprons that provide protection against hand knives, trousers for
use with chainsaws, clothing for protection against chemicals, high visibility clothing and motorcycle rider’s
protective clothing.
3.3
risk
combination of the frequency, or probability, of occurrence and the consequence of a specified
hazardous event
Note 1 to entry: The concept of risk always has two elements: the frequency or probability with which a hazardous
event occurs and the consequences of the hazardous event.
3.4
performance level
number that designates a particular category or range of performance by which the results of testing
can be graded
Note 1 to entry: For further information see Annex A.
3.5
protective clothing
clothing including protectors which cover or replace personal clothing, and which is designed to provide
protection against one or more hazards
3.6
waist to waist over the shoulder length
maximum length measured from the plane of the waist over the shoulder to the plane of the waist
Note 1 to entry: See also Clause 6.
3.7
torso
thorax and abdomen or section of the body to which the limbs, head and neck are attached
4 Basic health and ergonomic requirements
4.1 General
In the following paragraphs some basic health and ergonomic requirements are stated that are relevant
for many types of protective clothing.
NOTE For general ergonomic principles to be used in designing and specifying personal protective equipment
[7]
see EN 13921.
Protective clothing shall be designed and manufactured as follows.
2 © ISO 2013 – All rights reserved
ISO 13688:2013(E)
4.2 Innocuousness
Protective clothing shall not adversely affect the health or hygiene of the user. The materials shall not, in
the foreseeable conditions of normal use, release substances generally known to be toxic, carcinogenic,
mutagenic, allergenic, toxic to reproduction or otherwise harmful.
[9]
NOTE 1 Information on the classification and identification of harmful substances can be found, e.g. in of the
Bibliography.
NOTE 2 Guidance on how to consider acceptability of materials in protective clothing is given in the flow chart
in informative Annex B (Figure B.1).
The following list of documents is given for information and as examples of documents to be examined:
— Information supplied by the manufacturer could include evidence-based information confirming
that the product does not contain any substances at levels that are known or suspected to adversely
affect user hygiene or health,
— Materials specifications,
— Safety data sheets relating to the materials,
— Information relating to the suitability of the materials for use with food, in medical devices, or other
relevant applications,
— Information relating to toxicological, allergenic, carcinogenic, toxic to reproduction or mutagenic
investigations on the materials,
— Information relating to ecotoxicological and other environmental investigations on the materials.
Materials should be selected to minimize the environmental impact of the production and disposal of
protective clothing (see also Annex F).
The examination shall determine whether the claim that the materials are suitable for use in the protective
clothing or protective equipment is justified. Particular attention shall be paid to the presence of plasticisers,
unreacted components, heavy metals, impurities and the chemical identity of pigments and dyes.
Each layer of material of the protective clothing shall comply with the following requirements:
a) Chromium VI content in leather clothing shall not exceed 3 mg/kg according to ISO 17075.
b) All metallic materials which could come into prolonged contact with the skin (e.g. studs, fittings)
shall have a release of nickel of less than 0,5 µg/cm per week. The method of test shall be
according to EN 1811.
c) Protective clothing material shall have a value greater than pH3,5 and less than pH9,5. The test
method for leather shall be according to ISO 4045 and for textile materials according to ISO 3071.
d) Azo colorants which release carcinogenic amines listed in EN 14362-1 shall not be detectable by the
method in these standards.
4.3 Design
4.3.1 The design of protective clothing shall facilitate its correct positioning on the user and shall
ensure that it remains in place for the foreseeable period of use, taking into account ambient factors,
together with the movements and postures that the wearer could adopt during the course of work or
other activity. For this purpose, appropriate means, such as adequate adjustment systems or adequate
size ranges shall be provided so as to enable protective clothing to be adapted to the morphology of the
user. (See Annex C).
4.3.2 The design of protective clothing shall ensure that no parts of the body get uncovered by expected
movements by the wearer (e.g. a jacket should not rise above the waist when the arms are raised) if
ISO 13688:2013(E)
this is defined in the specific standard. The specific standard for protective clothing shall contain test
criteria (for example: checking that the garment can be put on and taken off easily; that arm and knee
and bending movements are possible; that unprotected body areas do not appear during movements;
that there is an adequate overlap of jacket and trousers; that the manufacturers information is adequate
to explain the correct usage of the protective clothing). (See Annex C).
4.3.3 Where applicable, protective clothing design shall take into account other items of protective
clothing or equipment from the same manufacturer which must be worn to form an overall protective
ensemble. When two or more items are worn together, they should be compatible and each one shall
comply with its own standard. None of them has to reduce the performance of the other item(s) and
the appropriate level of protection should be provided at interface areas between those products, for
example in sleeve to glove, trousers to footwear, hood and respirator combinations. There may be other
combinations.
4.3.4 In each specific standard, a minimum mechanical property to assess the strength of a garment
shall be defined.
4.4 Comfort
4.4.1 Protective clothing shall provide users with a level of comfort consistent with the level of
protection required against the hazard which is present, the ambient conditions, the level of the user’s
activity, and the anticipated duration of use of the protective clothing.
Protective clothing shall not
— have rough, sharp or hard surfaces that irritate or injure the user;
— be so tight, loose and/or heavy so that it restricts normal movement (see Annex C).
4.4.2 Protective clothing that imposes significant ergonomic burdens such as heat stress, or is
inherently uncomfortable because of the need to provide adequate protection, shall be accompanied
in the information
...
SLOVENSKI SIST EN ISO 13688
STANDARD
oktober 2013
Varovalna obleka – Splošne zahteve (ISO 13688:2013)
Protective clothing – General requirements (ISO 13688:2013)
Schutzkleidung – Allgemeine Anforderungen (ISO 13688:2013)
Vêtements de protection – Exigences générales (ISO 13688:2013)
Referenčna oznaka
ICS 13.340.10 SIST EN ISO 13688:2013 (sl)
Nadaljevanje na straneh II do III in od 1 do 28
© 2017-11. Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega standarda ni dovoljeno.
SIST EN ISO 13688 : 2013
NACIONALNI UVOD
Standard SIST EN ISO 13688 (sl), Varovalna obleka – Splošne zahteve (ISO 13688:2013), 2013, ima
status slovenskega standarda in je istoveten evropskemu standardu EN ISO 13688 (en, de, fr),
Protective clothing – General requirements (ISO 13688:2013), 2013.
Ta standard nadomešča SIST EN 340:2004.
NACIONALNI PREDGOVOR
Evropski standard EN ISO 13688:2013 je pripravil tehnični odbor Evropskega komiteja za
standardizacijo CEN/TC 162 Zaščitna obleka, vključno z zaščito rok in dlani, ter reševalni jopiči.
Slovenski standard SIST EN ISO 13688:2013 je prevod evropskega standarda EN ISO 13688:2013. V
primeru spora glede besedila slovenskega prevoda v tem standardu je odločilen izvirni evropski
standard v enem izmed treh uradnih jezikov CEN. Slovensko izdajo standarda je pripravil tehnični odbor
SIST/TC OVP Osebna varovalna oprema.
Odločitev za izdajo tega standarda je dne 14. februarja 2013 sprejel SIST/TC OVP Osebna varovalna
oprema.
ZVEZE S STANDARDI
S privzemom tega evropskega standarda veljajo za omejeni namen referenčnih standardov vsi
standardi, navedeni v izvirniku, razen tistih, ki so že sprejeti v nacionalno standardizacijo:
SIST EN ISO 3071 Tekstilije – Ugotavljanje pH vodnega ekstrakta
SIST EN ISO 3175-1 Tekstilije – Kemično čiščenje in naknadna obdelava – 1. del: Metoda za
ocenjevanje sposobnosti očiščenja tekstilij in oblačil
SIST ISO 3635 Označevanje velikosti oblačil – Definicije in postopek merjenja telesnih mer
SIST EN ISO 3758 Tekstilije – Označevanje nege s simboli
SIST EN ISO 4045 Usnje – Kemijsko preskušanje – Določevanje pH
SIST EN ISO 5077 Tekstilije – Ugotavljanje dimenzijskih sprememb pri pranju in sušenju
SIST ISO 7000 Grafični simboli za uporabo na opremi – Registrirani simboli
SIST EN ISO 17075 Usnje – Kemični preskusi – Določevanje kroma VI
SIST EN ISO 30023 Tekstilije – Kvalifikacijski simboli za označevanje delovnih oblek, namenjenih
za industrijsko pranje
SIST EN 1811 Primerjalna preskusna metoda za sproščanje niklja iz izdelkov, ki so v
neposrednem in daljšem stiku s kožo
SIST EN 14362-1 Tekstilije – Metode za določevanje nekaterih aromatskih aminov, izvirajočih iz
azo barvil – 1. del: Zaznavanje prisotnosti določenih azo barvil, dostopnih z
ekstrahiranjem vlaken in brez njega
OSNOVA ZA IZDAJO STANDARDA
‒ privzem standarda EN ISO 13688:2013
PREDHODNA IZDAJA
‒ standard SIST EN 340:2004
II
SIST EN ISO 13688 : 2013
OPOMBE
‒ Povsod, kjer se v besedilu standarda uporablja izraz “evropski standard”, v SIST EN ISO
13688:2013 to pomeni “slovenski standard”.
‒ Uvod in nacionalni predgovor nista sestavni del standarda.
‒ Ta nacionalni dokument je istoveten EN ISO 13688:2013 in je objavljen z dovoljenjem
CEN
Avenue Marnix 17
B-1000 Bruselj
Belgija
This national document is identical with EN ISO 13688:2013 and is published with the permission of
CEN
Avenue Marnix 17
B-1000 Brussels
Belgium
III
SIST EN ISO 13688 : 2013
(prazna stran)
IV
EVROPSKI STANDARD EN ISO 13688
EUROPEAN STANDARD
NORME EUROPÉENNE
julij 2013
EUROPÄISCHE NORM
ICS 13.340.10 Nadomešča EN 340:2003
Slovenska izdaja
Varovalna obleka – Splošne zahteve (ISO 13688:2013)
Protective clothing – General Vêtements de protection – Schutzkleidung – Allgemeine
requirements (ISO 13688:2013) Exigences générales Anforderungen (ISO 13688:2013)
(ISO 13688:2013)
Ta evropski standard je CEN sprejel 25. aprila 2013.
Člani CEN morajo izpolnjevati določila notranjih predpisov CEN/CENELEC, s katerimi je predpisano,
da mora biti ta evropski standard brez kakršnihkoli sprememb sprejet kot nacionalni standard. Seznami
najnovejših izdaj teh nacionalnih standardov in njihovi bibliografski podatki so na voljo pri Upravnem
centru CEN-CENELEC ali članih CEN.
Ta evropski standard obstaja v treh uradnih izdajah (angleški, francoski in nemški). Izdaje v drugih jezikih,
ki jih člani CEN na lastno odgovornost prevedejo in izdajo ter prijavijo pri upravnem centru CEN, veljajo
kot uradne izdaje.
Člani CEN so nacionalni organi za standarde Avstrije, Belgije, Bolgarije, Cipra, Češke republike, Danske,
Estonije, Finske, Francije, Grčije, Hrvaške, Irske, Islandije, Italije, Latvije, Litve, Luksemburga,
Madžarske, Malte, Nekdanje jugoslovanske republike Makedonije, Nemčije, Nizozemske, Norveške,
Poljske, Portugalske, Romunije, Slovaške, Slovenije, Španije, Švedske, Švice, Turčije in Združenega
kraljestva.
CEN
Evropski komite za standardizacijo
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
Upravni center: Avenue Marnix, 17, B-1050 Brussels
© 2013 CEN Lastnice avtorskih pravic so vse države članice CEN. Ref. št. EN ISO 13688:2013 E
SIST EN ISO 13688 : 2013
Predgovor
Ta dokument (EN ISO 13688:2013) je pripravil tehnični odbor ISO/TC 94 Osebna varnost – varovalna
obleka in oprema v sodelovanju s tehničnim odborom CEN/TC 162 Varovalna obleka, vključno z zaščito
za dlani in roke, ter rešilni jopiči, katerega sekretariat vodi DIN.
Ta evropski standard mora dobiti status nacionalnega standarda bodisi z objavo istovetnega besedila
ali z razglasitvijo najpozneje januarja 2014. Do istega roka morajo biti razveljavljeni tudi morebitni
nasprotujoči nacionalni standardi.
Opozoriti je treba na možnost, da so lahko nekateri elementi tega dokumenta predmet patentnih pravic.
CEN [in/ali CENELEC] ni odgovoren za ugotavljanje posameznih ali vseh patentnih pravic.
Ta dokument nadomešča standard EN 340:2003.
Ta dokument je bil pripravljen v okviru mandata, ki sta ga Evropska komisija in Evropsko združenje za
prosto trgovino dala CEN, ter podpira bistvene zahteve direktive Evropske unije.
Za zveze z direktivo Evropske unije glej dodatek ZA, ki je sestavni del tega evropskega standarda.
V skladu z notranjimi predpisi CEN-CENELEC so dolžne ta evropski standard privzeti nacionalne
organizacije za standarde naslednjih držav: Avstrije, Belgije, Bolgarije, Cipra, Češke republike, Danske,
Estonije, Finske, Francije, Grčije, Hrvaške, Irske, Islandije, Italije, Latvije, Litve, Luksemburga,
Madžarske, Malte, Nekdanje jugoslovanske republike Makedonije, Nemčije, Nizozemske, Norveške,
Poljske, Portugalske, Romunije, Slovaške, Slovenije, Španije, Švedske, Švice, Turčije in Združenega
kraljestva.
Razglasitvena objava
Besedilo ISO 13688:2013 je CEN odobril kot EN ISO 13688:2013 brez kakršnihkoli sprememb.
SIST EN ISO 13688 : 2013
Dodatek ZA
(informativni)
Razmerje med tem evropskim standardom in bistvenimi zahtevami Direktive EU
89/686/EGS
Ta evropski standard je bil pripravljen v okviru mandata, ki sta ga Evropska komisija in Evropsko
združenje za prosto trgovino dala CEN, da bi zagotovila sredstva za potrditev bistvenih zahtev Direktive
novega pristopa 89/686/EGS o približevanju zakonodaje držav članic v zvezi z osebno varovalno
opremo.
Ko je ta standard objavljen v Uradnem listu Evropskih skupnosti v okviru navedene direktive in je kot
nacionalni standard privzet v vsaj eni državi članici, skladnost s točkami tega evropskega standarda, ki
so navedene v preglednici ZA.1, v obsegu področja uporabe tega evropskega standarda ustvarja
domnevo o skladnosti z ustreznimi bistvenimi zahtevami te direktive in z njo povezanih predpisov EFTA.
Preglednica ZA.1: Zveze med tem evropskim standardom in Direktivo 89/686/EGS
Točke/podtočke tega Bistvene zahteve iz Priloge II k Direktivi 89/686/EGS
standarda EN
5.3 1.2.1 Odsotnost tveganja in drugih "z njim povezanih" motečih dejavnikov
4.2 1.2.1.1 Ustrezni sestavni materiali
4.4 1.2.1.2 Zadovoljiva površina vseh delov osebne varovalne opreme pri stiku z uporabnikom
8 1.4 Podatki, ki jih zagotovi proizvajalec
6, 7 2.12 Osebna varovalna oprema z eno ali več identifikacijskimi ali prepoznavnimi oznakami,
ki so neposredno ali posredno povezane z zdravjem in varnostjo
OPOZORILO: Za proizvode, ki sodijo na področje uporabe tega evropskega standarda, se lahko
uporabljajo tudi druge zahteve in druge direktive EU.
SIST EN ISO 13688 : 2013
VSEBINA Stran
Predgovor k mednarodnemu standardu . 5
Uvod . 6
1 Področje uporabe . 7
2 Zveze s standardi . 7
3 Izrazi in definicije . 7
4 Osnovne zdravstvene in ergonomske zahteve . 8
4.1 Splošno . 8
4.2 Neškodljivost . 8
4.3 Načrtovanje . 9
4.4 Udobnost . 10
5 Staranje . 10
5.1 Splošno . 10
5.2 Pranje in suho čiščenje. 10
5.3 Spremembe mer zaradi čiščenja . 10
6 Splošno označevanje velikosti . 11
7 Oznake . 11
7.1 Splošne . 11
7.2 Posebne . 12
8 Informacije, ki jih zagotovi proizvajalec . 13
Dodatek A (informativni): Raven učinkovitosti . 15
Dodatek B (informativni): Diagram poteka . 16
Dodatek C (informativni): Preverjanje ergonomskih lastnosti varovalne obleke
(praktični preskusi učinkovitosti) . 18
Dodatek D (informativni): Primeri označevanja velikosti . 21
Dodatek E (normativni): Piktogrami . 24
Dodatek F (informativni): Okoljski vidiki . 27
Literatura. 28
SIST EN ISO 13688 : 2013
Predgovor k mednarodnemu standardu
ISO (Mednarodna organizacija za standardizacijo) je svetovna zveza nacionalnih organov za standarde
(članov ISO). Mednarodne standarde po navadi pripravljajo tehnični odbori ISO. Vsak član, ki želi
delovati na določenem področju, za katerega je bil ustanovljen tehnični odbor, ima pravico biti zastopan
v tem odboru. Pri delu sodelujejo tudi mednarodne vladne in nevladne organizacije, povezane z ISO. V
vseh zadevah, ki so povezane s standardizacijo na področju elektrotehnike, ISO tesno sodeluje z
Mednarodno elektrotehniško komisijo (IEC).
Mednarodni standardi so pripravljeni v skladu s pravili iz 2. dela Direktiv ISO/IEC.
Glavna naloga tehničnih odborov je priprava mednarodnih standardov. Osnutki mednarodnih
standardov, ki jih sprejmejo tehnični odbori, se pošljejo vsem članom v glasovanje. Za objavo
mednarodnega standarda je treba pridobiti soglasje najmanj 75 odstotkov članov, ki se udeležijo
glasovanja.
Opozoriti je treba na možnost, da so lahko nekateri elementi tega dokumenta predmet patentnih pravic.
ISO ni odgovoren za ugotavljanje posameznih ali vseh patentnih pravic.
Standard ISO 13688 je pripravil tehnični odbor ISO/TC 94 Osebna varnost – varovalna obleka in
oprema, pododbor SC 13 Varovalna obleka, v sodelovanju s tehničnim odborom CEN/TC 162 Varovalna
obleka, vključno z zaščito za dlani in roke, ter rešilni jopiči.
Ta druga izdaja razveljavlja in nadomešča prvo izdajo (ISO 13688:1998), ki je bila tehnično revidirana
in vsebuje naslednje spremembe:
‒ v področje uporabe tega standarda je bila dodana izjava, da naj bi se ta mednarodni standard (in
piktogram) uporabljal skupaj z drugim standardom za proizvod;
‒ dodani sta definiciji za dolžino od ravnine pasu preko ramena nazaj do ravnine pasu in za trup;
‒ opombe o ravni učinkovitosti so prestavljene v dodatek A;
‒ točka 4 o ergonomiji je spremenjena v osnovne zdravstvene in ergonomske zahteve in revidirana
v posamezne podrazdelke: splošno (4.1), neškodljivost (4.2), načrtovanje (4.3) in udobnost (4.4);
‒ informativnemu dodatku C so dodane ergonomske lastnosti;
‒ podtočka 5.2 o obstojnosti barv je odstranjena;
‒ podtočka 5.3 o čiščenju je preimenovana v "pranje in suho čiščenje" (5.2) ter zdaj vsebuje
sklicevanje na standardizirane procese, vključno z industrijskim pranjem;
‒ določila v podtočki 5.3 o spremembah mer zaradi čiščenja so natančnejša;
‒ sistem označevanja velikosti v točki 6 je poenostavljen glede intervalov in razponov ter dovoljuje
več svobode za boljše posamezno prileganje;
‒ podtočka 7.2 o posebnih oznakah je spremenjena in vključuje kvalifikacijsko označevanje za
industrijsko nego perila;
‒ informativnemu dodatku B (diagram poteka) je dodana sprejemljivost materialov;
‒ informativnemu dodatku F so dodani okoljski vidiki.
SIST EN ISO 13688 : 2013
Uvod
Ta mednarodni standard je referenčni standard, na katerega se po potrebi sklicujejo posebni standardi.
Ta mednarodni standard ni namenjen samostojni uporabi, temveč se uporablja samo skupaj z drugim
standardom, ki vsebuje zahteve za določeno učinkovitost proizvoda, ki zagotavlja varovanje.
SIST EN ISO 13688 : 2013
Varovalna obleka – Splošne zahteve
1 Področje uporabe
Ta mednarodni standard določa splošne zahtevane lastnosti glede ergonomije, neškodljivosti,
označevanja velikosti, staranja, združljivosti in oznak varovalnih oblek ter določa informacije, ki jih mora
proizvajalec priložiti varovalnim oblekam.
Ta mednarodni standard ni namenjen samostojni uporabi, temveč se uporablja samo skupaj z drugimi
standardi, ki vsebujejo zahteve za določene varovalne lastnosti.
2 Zveze s standardi
Za uporabo tega dokumenta so nujni naslednji referenčni dokumenti. Pri datiranih sklicevanjih se
uporablja samo navedena izdaja. Pri nedatiranih sklicevanjih se uporablja zadnja izdaja referenčnega
dokumenta (vključno z morebitnimi dopolnili).
ISO 3071 Tekstilije – Ugotavljanje pH vodnega ekstrakta
ISO 3175-1 Tekstilije – Profesionalna nega ter kemično in mokro čiščenje tekstilnih izdelkov
in oblačil – 1. del: Metoda za ocenjevanje sposobnosti očiščenja in plemenitenja
ISO 3635 Označevanje velikosti oblačil – Definicije in postopek merjenja telesnih mer
ISO 3758 Tekstilije – Označevanje nege s simboli
ISO 4045 Usnje – Kemijsko preskušanje – Določevanje pH
ISO 5077 Tekstilije – Ugotavljanje dimenzijskih sprememb pri pranju in sušenju
ISO 7000 Grafični simboli za uporabo na opremi – Registrirani simboli
ISO 17075 Usnje – Kemični preskusi – Določevanje kroma VI
ISO 30023 Tekstilije – Kvalifikacijski simboli za označevanje delovnih oblek, namenjenih za
industrijsko pranje
EN 1811 Primerjalna preskusna metoda za sproščanje niklja iz izdelkov, ki so v
neposrednem in daljšem stiku s kožo
EN 14362-1 Tekstilije – Metode za določevanje nekaterih aromatskih aminov, izvirajočih iz
azo barvil – 1. del: Zaznavanje prisotnosti določenih azo barvil, dostopnih z
ekstrahiranjem vlaken in brez njega
3 Izrazi in definicije
V tem dokumentu se uporabljajo naslednji izrazi in definicije.
3.1
staranje
sprememba ene ali več začetnih lastnosti materialov varovalnih oblek po preteku določenega časa
3.2
nevarnost
situacija, ki je lahko škodljiva za zdravje ali povzroči poškodbo uporabnika
OPOMBA 1: Obstajajo različne splošne vrste nevarnosti, npr. mehanske nevarnosti, kemične nevarnosti, nevarnosti zaradi
mraza, vročine in/ali požara, nevarnosti zaradi bioloških dejavnikov, nevarnosti sevanja. Nekatere vrste teh
nevarnosti lahko v povezavi z okoliščinami izhajajo iz bolj specifičnih nevarnosti. Tako lahko nevarnost zaradi
vročine izhaja iz prenosa toplote, toplotnega sevanja itd., pri čemer je lahko za vsako nevarnost na voljo posebna
preskusna metoda.
SIST EN ISO 13688 : 2013
Določena oblačila so načrtovana tako, da varujejo pred nevarnostmi, do katerih pride pri posameznih dejavnostih.
Primeri takih oblačil so predpasniki, ki varujejo pred ročnimi noži, hlače, ki se nosijo pri uporabi verižnih žag,
obleke za zaščito pred kemikalijami, dobro vidne obleke in varovalne obleke za voznike motornih koles.
3.3
tveganje
kombinacija pogostosti ali verjetnosti pojavitve določenega nevarnega dogodka in posledice
OPOMBA 1: Pojem tveganja ima vedno dva elementa: pogostost ali verjetnost pojavitve nevarnega dogodka in posledice
nevarnega dogodka.
3.4
raven učinkovitosti
številka, ki označuje določeno kategorijo ali razpon učinkovitosti, s katero je mogoče oceniti preskusne
rezultate
OPOMBA 1: Za nadaljnje informacije glej dodatek A.
3.5
varovalna obleka
obleke, vključno s ščitniki, ki prekrivajo ali zamenjajo osebne obleke in so zasnovane tako, da varujejo
pred eno ali več nevarnostmi
3.6
dolžina od ravnine pasu preko ramena nazaj do ravnine pasu
največja dolžina, izmerjena od ravnine pasu preko ramena nazaj do ravnine pasu
OPOMBA 1: Glej tudi točko 6.
3.7
trup
prsni koš in trebuh ali del telesa, na katerega so pritrjeni udi, glava in vrat
4 Osnovne zdravstvene in ergonomske zahteve
4.1 Splošno
V naslednjih odstavkih so navedene nekatere osnovne zdravstvene in ergonomske zahteve, ki so
pomembne za številne vrste varovalnih oblek.
OPOMBA: Za splošna ergonomska načela, ki jih je treba uporabljati pri načrtovanju in določanju osebne varovalne opreme,
glej standard EN 13921.[7]
Varovalne obleke je treba načrtovati in izdelati na naslednji način.
4.2 Neškodljivost
Varovalna obleka ne sme škodljivo vplivati na zdravje ali higieno uporabnika. Materiali v pričakovanih
razmerah običajne uporabe ne smejo sproščati snovi, ki so splošno znano toksične, karcinogene,
mutagene, alergene, toksične za reprodukcijo ali drugače škodljive.
OPOMBA 1: Informacije o razvrščanju in prepoznavanju škodljivih snovi je mogoče najti npr. pod točko [9] v Literaturi.
OPOMBA 2: Navodilo, kako presoditi sprejemljivost materialov v varovalnih oblekah, je podano v diagramu poteka v
informativnem dodatku B (slika B.1).
Naslednji informativni seznam dokumentov služi kot primer dokumentov, ki jih je treba preučiti:
‒ informacije, ki jih zagotovi proizvajalec, lahko vključujejo informacije, pridobljene na podlagi
dokazov, ki potrjujejo, da proizvod ne vsebuje nobenih snovi v količini, za katero je znano ali se
sumi, da škodljivo vpliva na uporabnikovo higieno ali zdravje,
SIST EN ISO 13688 : 2013
‒ specifikacije materiala,
‒ varnostni listi v zvezi z materiali,
‒ informacije v zvezi s primernostjo materialov za uporabo z živili, v medicinskih pripomočkih ali za
drugo ustrezno uporabo,
‒ informacije v zvezi s toksičnostjo, alergenostjo, karcinogenostjo, toksičnim vplivom na reprodukcijo
ali mutagenskimi preiskavami materiala,
‒ informacije v zvezi z ekotoksikološkimi in drugimi okoljskimi preiskavami materialov.
Materiali naj bodo izbrani tako, da je vpliv na okolje zaradi proizvodnje in odstranjevanja varovalnih
oblačil čim manjši (glej tudi dodatek F).
S pregledom je treba ugotoviti, ali je upravičena trditev, da so materiali primerni za uporabo v varovalnih
oblekah in opremi. Posebno pozornost je treba nameniti prisotnosti mehčal, nereagiranih komponent,
težkih kovin, nečistoč ter kemijski identiteti pigmentov in barvil.
Vsaka plast materiala varovalne obleke mora biti v skladu z naslednjimi zahtevami:
a) vsebnost kroma IV v usnjenih oblačilih ne sme presegati 3 mg/kg po ISO 17075;
b) sproščanje niklja pri vseh kovinskih materialih, ki bi lahko bili dalj časa v stiku s kožo (npr. gumbi,
spojniki), mora biti manjše kot 0,5 µg/cm na teden. Preskusna metoda mora biti v skladu z
EN 1811;
c) material varovalne obleke mora imeti vrednost pH večjo od 3,5 in manjšo od 9,5. Preskusna metoda
mora biti za usnje v skladu z ISO 4045, za tekstilije pa v skladu z ISO 3071;
d) azo barvil, ki sproščajo karcinogene amine, navedene v EN 14362-1, ne sme biti mogoče zaznati
z metodo v teh standardih.
4.3 Načrtovanje
4.3.1 Načrtovanje varovalnih oblek mora olajšati pravilen položaj obleke na uporabniku in zagotoviti,
da obleka ostane na mestu v predvidenem obdobju uporabe ob upoštevanju okoljskih dejavnikov ter
morebitnega gibanja in drže nosilca med delom ali drugo dejavnostjo. Zato je treba zagotoviti primerna
sredstva, npr. ustrezna sredstva za prilagajanje ali ustrezne razpone velikosti, da je varovalne obleke
mogoče prilagoditi morfologiji uporabnika (glej dodatek C).
4.3.2 Načrtovanje varovalne obleke mora zagotavljati, da se noben del telesa ne razkrije zaradi
pričakovanih gibov nosilca (npr. delovni jopič naj se ne dvigne nad pas, ko so roke dvignjene), če je tako
opredeljeno v posebnem standardu. Posebni standard za varovalne obleke mora vsebovati preskusna
merila (npr. preverjanje, da je oblačilo mogoče obleči in sleči brez težav; da je mogoče premikati roke
in kolena ter jih upogibati; da se med gibanjem ne pojavijo nezaščiteni deli telesa; da se jopič in hlače
dovolj prekrivajo; da so podatki proizvajalca dovolj podrobni, da je z njimi mogoče ustrezno razložiti
pravilno uporabo varovalne obleke). (Glej dodatek C).
4.3.3 Kjer je to ustrezno, je treba pri načrtovanju varovalne obleke upoštevati druge elemente varovalne
obleke ali opreme istega proizvajalca, ki jih je treba nositi za celovito zaščito. Kadar je treba nositi dva
elementa ali več, naj bodo ti združljivi in vsak posebej mora biti v skladu s svojim standardom. Noben
element ne sme zmanjšati učinkovitosti drugega(-ih) elementa(-ov) in zagotovljena naj bo ustrezna
stopnja zaščite na stičnih območjih teh izdelkov, na primer med rokavom in rokavico, hlačami in obutvijo,
masko in respiratorjem. Mogoče so lahko tudi druge kombinacije.
4.3.4 V vsakem posebnem standardu je treba opredeliti minimalne mehanske lastnosti za oceno
trdnosti oblačila.
SIST EN ISO 13688 : 2013
4.4 Udobnost
4.4.1 Varovalne obleke morajo uporabnikom zagotavljati določeno raven udobnosti, ki je skladna s
stopnjo zaščite, potrebno za prisotno nevarnost, okoljskimi razmerami, ravnjo uporabnikove dejavnosti
in pričakovanim trajanjem uporabe varovalne obleke.
Varovalne obleke ne smejo:
‒ imeti grobih, ostrih ali trdih površin, ki dražijo ali poškodujejo uporabnika,
‒ biti tako ozke, ohlapne in/ali težke, da omejujejo normalno gibanje (glej dodatek C).
4.4.2 Za varovalne obleke, ki jih narekujejo znatne ergonomske obremenitve, kot je izpostavljenost
vročini, ali imajo neudoben kroj zaradi zagotavljanja ustreznega varovanja, morajo biti v priloženih
informacijah, ki jih zagotovi proizvajalec, navedeni posebni nasveti ali opozorila. Podati je treba
konkretne nasvete, koliko časa lahko traja nošenje oblek pri neprekinjeni in predvideni uporabi.
5 Staranje
5.1 Splošno
Ta mednarodni standard obravnava samo spremembe mer zaradi čiščenja, ki vplivajo na učinkovitost
obleke in čitljivost oznak (glej 5.3).
5.2 Pranje in suho čiščenje
Čiščenje mora biti v skladu z navodili proizvajalca in mora temeljiti na standardiziranih procesih. Če
število čistilnih ciklov ni določeno, jih je treba izvesti pet. To mora biti navedeno v informacijah, ki jih
zagotovi proizvajalec.
Če se zaradi postopkov čiščenja hitro s
...
Frequently Asked Questions
EN ISO 13688:2013 is a standard published by the European Committee for Standardization (CEN). Its full title is "Protective clothing - General requirements (ISO 13688:2013)". This standard covers: ISO 13688:2012 specifies general performance requirements for ergonomics, innocuousness, size designation, ageing, compatibility and marking of protective clothing and the information to be supplied by the manufacturer with the protective clothing. ISO 13688:2012 is only intended to be used in combination with other standards containing requirements for specific protective performance and not on a stand-alone basis.
ISO 13688:2012 specifies general performance requirements for ergonomics, innocuousness, size designation, ageing, compatibility and marking of protective clothing and the information to be supplied by the manufacturer with the protective clothing. ISO 13688:2012 is only intended to be used in combination with other standards containing requirements for specific protective performance and not on a stand-alone basis.
EN ISO 13688:2013 is classified under the following ICS (International Classification for Standards) categories: 13.340.10 - Protective clothing. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 13688:2013 has the following relationships with other standards: It is inter standard links to EN 340:2003, EN ISO 13688:2013/A1:2021. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 13688:2013 is associated with the following European legislation: EU Directives/Regulations: 2016/425, 89/686/EEC; Standardization Mandates: M/031. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN ISO 13688:2013 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
La norme EN ISO 13688:2013 établit un cadre essentiel pour les vêtements de protection, en spécifiant des exigences générales de performance. Son champ d'application englobe des aspects cruciaux comme l'ergonomie, l’innocuité, la désignation de taille, le vieillissement, la compatibilité, ainsi que le marquage des vêtements. L'une des forces majeures de cette norme réside dans son approche systématique, garantissant que ces vêtements répondent à des critères de qualité élevés tout en offrant une sécurité optimale à l'utilisateur. La norme souligne également l'importance de l'information que le fabricant doit fournir avec les vêtements de protection, renforçant ainsi la transparence et la confiance des consommateurs. Cela est particulièrement pertinent dans des secteurs où la sécurité au travail est primordiale. De plus, la norme EN ISO 13688:2013 n'est pas conçue pour être utilisée isolément, mais doit être appliquée en combinaison avec d'autres normes qui traitent des exigences de performance spécifiques à divers types de protections. Cela assure une approche intégrée et exhaustive pour le développement et l'évaluation des vêtements de protection. En termes de pertinence, cette norme répond aux besoins croissants en matière de sécurité et de confort dans l'industrie, ce qui en fait un outil indispensable pour les fabricants et les utilisateurs de vêtements de protection. Sa mise en œuvre contribue à la réduction des risques liés à l'utilisation de vêtements de travail, tout en promouvant une culture de la sécurité. Cette norme est donc une référence incontournable pour ceux qui œuvrent dans le domaine des équipements de protection individuelle.
The standard SIST EN ISO 13688:2013 outlines the critical general requirements for protective clothing, emphasizing essential performance criteria such as ergonomics, innocuousness, size designation, aging, compatibility, and marking. This ISO standard is pivotal for manufacturers and designers in the protective clothing sector, ensuring products adhere to essential safety and usability benchmarks. One of the strengths of the EN ISO 13688:2013 is its comprehensive focus on ergonomics, which ensures that protective clothing not only provides safety but also allows freedom of movement and comfort for the wearer. This aspect is increasingly important in various industries, where employees require both protection and mobility to perform their tasks efficiently. The standard’s relevance is amplified by its requirements for innocuousness, which ensures that the materials used in protective clothing do not pose any health risks to users. This aligns with contemporary safety standards and helps manufacturers produce apparel that is safe for extended wear. Additionally, size designation is a crucial component of the EN ISO 13688:2013 standard. A well-defined sizing system enhances the user's fit, which is integral for effectiveness in protective clothing. The standard also addresses the significance of aging and compatibility, thereby ensuring that garments continue to perform optimally over time and can be effectively used in conjunction with other protective equipment. It is important to highlight that while EN ISO 13688:2013 provides these fundamental general requirements, it is not intended for standalone application. It must be utilized alongside specific standards that contain detailed performance criteria related to particular types of protective clothing. This complementary nature underscores the necessity for manufacturers to refer to additional standards to ensure comprehensive safety and performance compliance. In conclusion, the SIST EN ISO 13688:2013 standard serves as an essential framework for the development and assessment of protective clothing, balancing performance, safety, and user comfort, while remaining relevant in the continually evolving landscape of work safety standards.
SIST EN ISO 13688:2013 문서의 표준은 개인 보호복에 대한 일반적인 요구사항을 포함하고 있습니다. 이 표준은 인체 공학, 무해성, 사이즈 지칭, 노화, 호환성 및 마킹과 같은 몇 가지 중요한 요소에 대해 강력한 성능 요구사항을 제시하고 있습니다. 이러한 포괄적인 접근 방식은 사용자들에게 다양한 안전 기준을 충족하는 보호복의 설계 및 사용에 대한 명확한 지침을 제공합니다. 표준의 주요 강점 중 하나는 인체 공학적 요구사항에 대한 명확한 규정을 통해 착용자의 편안함을 보장하는 데 중점을 두고 있다는 것입니다. 또한, 무해성 요구사항을 설정함으로써 사용자의 안전을 최우선으로 고려하고 있습니다. 이러한 측면은 보호복이 실제 환경에서 어떻게 작용해야 하는지를 잘 나타내며, 제조사로 하여금 책임감을 가지고 제품을 디자인하도록 유도합니다. SIST EN ISO 13688:2013은 다른 특정 보호 성능 요건을 포함하는 표준과 결합하여 사용되도록 설계되었고, 독립적으로는 적용될 수 없으므로, 다양한 보호복의 효율성과 안전성을 보장하기 위해 필수적입니다. 이 표준의 적합성은 개인 보호복의 지속적인 발전에 기여하며, 산업계에서 보호복의 품질 및 성능 개선에 중요한 역할을 담당하고 있습니다. 결론적으로, EN ISO 13688:2013 표준은 보호복 산업에서 필수적인 문서로, 의류의 설계 및 선택 과정에서 중요한 참고 자료가 됩니다. 이 표준을 따르는 것은 사용자와 제조업체 모두에게 신뢰성을 높이고, 궁극적으로는 안전한 작업 환경을 조성하는 데 기여합니다.
SIST EN ISO 13688:2013は、保護服に関する一般的な要件を定めた重要な規格であり、作業環境における安全性を確保するための基盤を提供しています。この規格の範囲は、エルゴノミクス、無害性、サイズの指定、経年劣化、互換性、マーク付けに関する一般的な性能要件を含んでおり、保護服製造者が提供すべき情報も含まれています。これにより、ユーザーは意図した用途に応じた適切な保護具を選択するための重要な指針を得ることができます。 ISO 13688:2013の強みは、保護服の設計と製造に必要な基準を整理し、製品の信頼性と安全性を高める点にあります。特に、エルゴノミクスに関する要件は、着用者の快適性や動きやすさを追求しており、長時間の使用時にも疲労を軽減します。無害性の基準により、皮膚に直に接触する製品の安全性が保証され、使用者が安心して利用できることが期待されます。 さらに、この規格は単独ではなく、他の特定の保護性能に関する基準と併用して使用することが推奨されているため、ユーザーはより具体的な性能要件を考慮に入れた上での選択を行うことができます。これにより、保護服の総合的な安全性と効率性が向上し、労働環境における事故や怪我のリスクを低減することに寄与します。 SIST EN ISO 13688:2013は、業界全体で共有される標準を提供することで、保護服に関する品質管理とコンプライアンスを促進し、製造者とユーザーの双方にとって重要な役割を果たしています。このように、ISO 13688:2013は保護服の選択と使用において非常に関連性の高い規格であり、その内容は現在の市場要求に即したものとなっています。
SIST EN ISO 13688:2013は、保護服に関する一般的な要求事項を定めた重要な標準です。この標準は、エルゴノミクス、無害性、サイズ表示、経年劣化、互換性、及びマーキングに関する一般的なパフォーマンス要件を明示しており、保護服の製造者が提供すべき情報を詳細に示しています。 この標準の強みは、保護服が適切に機能するために必要な基本的な要件を網羅している点にあります。特に、製品の無害性や使用者に対する快適性を確保するためのエルゴノミクスに関する指針は、実際の使用環境において非常に重要です。また、サイズ表示の明確化により、消費者が適切なフィット感を得ることができるため、安全性を高める要素となります。 さらに、この標準は単独での使用を意図したものではなく、特定の保護性能に関する要求事項を含む他の標準と組み合わせて使用されることが求められています。これにより、より専門的な要件を満たすことができるため、保護服の総合的な性能向上に貢献します。この点は、産業界において、様々なリスクから作業者を守る上で非常に重要です。 SIST EN ISO 13688:2013は、保護服が求めるべき一般的な基準を提供しており、業界の安全基準の向上に寄与しています。保護服の製造者や使用者にとって、非常に有用な文書であり、規格に従った製品の開発と選定において不可欠な指針となっています。
EN ISO 13688:2013 표준은 보호복의 일반 요구사항을 규정하고 있습니다. 이 표준의 범위는 인체공학, 무해성, 사이즈 지명, 노화, 호환성 및 마킹과 같은 성능 요구사항을 포함합니다. 이러한 요구사항은 제조자가 보호복과 함께 제공해야 할 정보와 관련이 있습니다. EN ISO 13688:2013의 강점 중 하나는 사용자가 보호복을 선택할 때 고려해야 할 여러 기준을 제시한다는 점입니다. 이는 장비의 Ergonomics(인체공학적 설계)를 통해 사용자의 편안함을 극대화하고, Innocuousness(무해성) 원칙을 통해 건강과 안전을 보장합니다. 또한, 사이즈 지명과 관련된 요소는 사용자에게 적합한 옷을 선택할 수 있도록 도와줍니다. 또한, 이 표준은 보호복의 노화 및 호환성에 관한 요구사항을 포함하고 있어, 시간이 경과해도 우수한 성능을 유지할 수 있도록 하고, 다른 표준과 함께 사용될 때 더욱 유용하게 작용합니다. 이는 보호복이 특정한 보호 성능 요구사항을 충족하도록 하여 안전성을 강화하는 데 기여합니다. EN ISO 13688:2013은 고유한 사양을 제공하는 다른 표준과 결합하여 사용하는 데 최적화되어 있으며, 이를 통해 외부 환경에서 사용자 보호 능력을 극대화할 수 있습니다. 따라서 이 표준은 보호복 시장에서 중요한 기준으로 자리 잡고 있으며, 사용자의 안전과 건강을 보장하는 데 필수적인 역할을 합니다.
Die Norm EN ISO 13688:2013 legt grundlegende Anforderungen an Schutzausrüstung fest und spielt eine entscheidende Rolle in der Standardisierung von persönlicher Schutzausrüstung. Der Umfang dieser Norm ist umfassend und deckt wichtige Aspekte wie Ergonomie, Unschädlichkeit, Größenklassifizierung, Alterung und Kompatibilität ab. Diese Anforderungen sind entscheidend, um sicherzustellen, dass Schutzausrüstungen effektiv und benutzerfreundlich gestaltet sind. Ein herausragendes Merkmal der Norm ist die Betonung der Ergonomie. Die ergonomischen Anforderungen sorgen dafür, dass die Schutzkleidung den Träger nicht nur effektiv schützt, sondern auch Komfort und Bewegungsfreiheit bietet. Dies ist besonders wichtig für Berufe, in denen die Mitarbeiter sich viel bewegen müssen, da schlecht gestaltete Schutzausrüstung die Leistung beeinträchtigen und zu gesundheitlichen Problemen führen kann. Darüber hinaus behandelt die Norm die Unschädlichkeit von Materialien, die in der Schutzkleidung verwendet werden. Dies ist ein bedeutender Aspekt, da die Sicherheit des Benutzers an erster Stelle steht. Die Norm fordert, dass die verwendeten Materialien keine gesundheitlichen Risiken für den Benutzer darstellen, was die Relevanz von EN ISO 13688:2013 in der Schutzausrüstungsindustrie unterstreicht. Ein weiterer wichtiger Punkt ist die Altersbeständigkeit der Schutzkleidung. Normen legen Anforderungen fest, die sicherstellen, dass die Schutzeigenschaften auch über längere Zeiträume hinweg erhalten bleiben. Dies ist besonders wichtig in Umgebungen, in denen Schutzausrüstungen regelmäßig getragen werden und verschiedenen Umweltbedingungen ausgesetzt sind. Die Norm behandelt auch die Kompatibilität der Schutzkleidung mit anderen Schutzausrüstungen, was für Berufe von Bedeutung ist, in denen mehrere Arten von Schutzausrüstung gleichzeitig verwendet werden müssen. EN ISO 13688:2013 stellt sicher, dass kombinierte Anwendungen von Schutzkleidung effizient und sicher gestaltet werden können. Die Möglichkeit, diese Norm in Kombination mit anderen spezifischen Normen zu verwenden, erhöht ihre Anwendbarkeit und Relevanz in einer Vielzahl von Branchen. Sie bietet einen soliden Rahmen für die Entwicklung von spezialisierter Schutzkleidung, die den spezifischen Anforderungen der Benutzer gerecht wird. Zusammenfassend lässt sich sagen, dass die Norm EN ISO 13688:2013 grundlegend ist für die Entwicklung und Bewertung von Schutzausrüstung. Ihre umfassenden Anforderungen an Ergonomie, Unschädlichkeit, Altersbeständigkeit und Kompatibilität machen sie zu einem unverzichtbaren Dokument für Hersteller und Anwender von Schutzkleidung.
Die Norm EN ISO 13688:2013 legt fundamentale allgemeine Anforderungen für Schutzkleidung fest, die in einem breiten Spektrum von Anwendungen relevant sind. Sie befasst sich mit zentralen Aspekten der Ergonomie, der Unbedenklichkeit, der Größenangabe, der Alterungsbeständigkeit, der Kompatibilität sowie der Kennzeichnung von Schutzbekleidung. Diese umfassenden Kriterien gewährleisten, dass Schutzkleidung nicht nur funktional, sondern auch komfortabel zu tragen ist. Ein herausragendes Merkmal dieser Norm ist ihr Fokus auf Ergonomie, was bedeutet, dass die Kleidung so gestaltet ist, dass sie dem Träger optimale Bewegungsfreiheit und Komfort bietet. Dies ist besonders wichtig in Arbeitsumgebungen, in denen Beweglichkeit von höchster Bedeutung ist. Des Weiteren behandelt die Norm die Unbedenklichkeit der Materialien, die für die Herstellung der Schutzkleidung verwendet werden, was die Sicherheit der Benutzer in den Vordergrund stellt. Ein weiterer Stärke der EN ISO 13688:2013 ist die Vorgabe zur Altersbeständigkeit der Materialien. Hierdurch wird sichergestellt, dass die Schutzkleidung auch über längere Zeiträume hinweg ihre schützenden Eigenschaften behält. Die Norm fordert auch eine klare Kennzeichnung und Information durch den Hersteller, was ein entscheidender Faktor für die richtige Anwendung und Sicherheit im Einsatz von Schutzkleidung ist. Es ist jedoch wichtig zu betonen, dass die EN ISO 13688:2013 nicht als eigenständige Norm verwendet werden sollte. Sie ist vielmehr als ergänzende Grundlage gedacht, die in Kombination mit anderen Normen, die spezifische Anforderungen an die Schutzeigenschaften stellen, eingesetzt wird. Dies erhöht die Relevanz der Norm im Kontext hochspezialisierter Anwendungen, in denen spezifische Schutzbedürfnisse vorliegen. Insgesamt bietet die EN ISO 13688:2013 einen soliden Rahmen, der die allgemeinen Anforderungen an Schutzkleidung festlegt und sich so als ein fundamentales Dokument in der Branche erweist. Die Norm ist wesentlich, um sicherzustellen, dass Schutzkleidung sowohl den Sicherheitsstandards als auch den praktischen Bedürfnissen der Benutzer gerecht wird.
The EN ISO 13688:2013 standard serves as a comprehensive framework for protective clothing, establishing general requirements that must be met regarding ergonomics, innocuousness, size designation, ageing, compatibility, and marking. This standard is essential for ensuring the quality and safety of protective clothing, as it sets performance benchmarks that enhance user comfort and safety, making it highly relevant for manufacturers and consumers alike. One of the core strengths of ISO 13688:2013 is its emphasis on ergonomics. By incorporating ergonomic principles, the standard helps ensure that protective clothing allows for ease of movement and comfort, which is critical for professionals who rely on such apparel in hazardous environments. This focus on user experience not only improves functionality but also promotes compliance with safety regulations. The standard’s requirements for innocuousness further highlight its commitment to safety. By mandating that materials used in protective clothing are non-harmful, the standard ensures that garments do not pose health risks to wearers. This aspect makes EN ISO 13688:2013 particularly relevant in industries where exposure to potentially hazardous substances is common. Additionally, the guidelines for size designation and compatibility are integral, as they ensure that protective clothing fits properly and can be worn with other safety gear without compromising protection. This interoperability is vital for maintaining a high level of safety in various professional settings. Marking and the information provided by manufacturers enhance the standard’s practicality. Clear labeling and accompanying instructions help consumers make informed choices and ensure proper use of protective clothing, facilitating adherence to necessary safety protocols. However, it is important to note that ISO 13688:2013 is not intended for use as a standalone standard; it must be combined with other specific performance standards to address particular protective features. This interplay ensures that while the general requirements are met, the specific needs of varied protective scenarios are also addressed comprehensively. In summary, the EN ISO 13688:2013 standard plays a pivotal role in the realm of protective clothing. Its focus on ergonomics, innocuousness, size designation, compatibility, and thorough labeling fosters the development of high-quality protective wear. This standard remains crucial for manufacturers aiming to produce effective, safe, and user-friendly protective clothing that complies with regulatory safety requirements.
La norme SIST EN ISO 13688:2013 définit des exigences générales cruciales pour les vêtements de protection. Son objectif est d'établir des critères concernant l'ergonomie, l'innocuité, la désignation des tailles, le vieillissement, la compatibilité et le marquage des vêtements de protection. Cela en fait une norme essentielle pour garantir que les vêtements de protection répondent à des standards élevés avant d'être mis sur le marché. L'une des forces de cette norme est son approche globale et systématique vis-à-vis des exigences de performance. En intégrant des critères tels que l'ergonomie et l'innocuité, elle assure que les utilisateurs bénéficient d'une protection efficace tout en préservant leur confort, un facteur souvent négligé. De plus, la compatibilité avec d'autres normes spécifiques renforce son efficacité, car ISO 13688:2013 n'est pas conçue pour être utilisée isolément, mais comme un complément à d'autres normes qui détaillent les performances spécifiques des vêtements de protection. Un autre aspect essentiel de cette norme est l'importance accordée à la communication des informations par les fabricants. La clarté des marquages et des informations fournies avec les vêtements de protection est fondamentale pour l'utilisateur final, garantissant une compréhension adéquate des caractéristiques et des limites de la protection offerte. En matière de sécurité, la norme SIST EN ISO 13688:2013 joue un rôle clé dans la création d'un cadre pour la conception, la fabrication et l'évaluation des vêtements de protection. Son adoption contribue non seulement à la conformité réglementaire mais aussi à l'amélioration constante de la qualité des produits offerts sur le marché. Ainsi, cette norme se révèle pertinente et nécessaire pour tous les acteurs impliqués dans la production et l'utilisation de vêtements de protection.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...