EN 13566-7:2007
(Main)Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes
This part of EN 13566, read in conjunction with EN 13566-1, specifies requirements and test methods for pipes that are formed on site by spirally winding and jointing a pre-manufactured profiled plastics strip using a winding machine in front of the open end of an existing pipeline (e.g. in a manhole). The pipes thus formed are simultaneously inserted into the existing pipeline by the winding forces.
It covers spirally-wound pipes of a fixed diameter made of profiled plastics strips of unplasticized poly(vinyl chloride) (PVC U) with an integral locking mechanism. These spirally-wound pipes are used for renovating non-pressure drainage and sewerage networks and are fixed in place by grouting the annular space.
NOTE The grouting procedure is outside the scope of this standard.
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen Entwässerungsnetzen (Freispiegelleitungen) — Teil 7: Wickelrohr-Lining
Dieser Teil 7 von EN 13566, zu lesen in Verbindung mit EN 13566-1, legt Anforderungen und Prüfverfahren für Rohre fest, die vor Ort geformt werden, indem ein vorgefertigter profilierter Kunststoff-Streifen durch eine dafür vorgesehene Wickelmaschine verarbeitet und verbunden wird, wobei sich die Maschine vor der Öffnung eines bereits bestehenden Rohrschachtes (z. B. in einem Einsteigschacht) befindet. Die so geformten Rohre werden gleichzeitig durch die Spiralwirkung in den bestehenden Rohrschacht eingebracht.
Dieser Teil behandelt Wickelrohre mit festgelegtem Durchmesser, hergestellt aus profilierten Kunststoff-Streifen aus weichmacherfreiem Polyvinylchlorid (PVC-U) mit integriertem Verbindungsmechanismus. Mit dem Kunststoff-Profil können zusätzliche Versteifungselemente verwendet werden. Diese Wickelrohre sind zur Verwendung für die Renovierung von drucklosen Entwässerungsnetzen und für das Befestigen durch Verdämmung des Ringraumes vorgesehen.
ANMERKUNG Das Verdämmungs-Verfahren liegt außerhalb des Anwendungsbereiches dieser Norm.
Systèmes de canalisations plastiques pour la rénovation des réseaux d'assainissement enterrés sans pression - Partie 7 : Tubage par enroulement hélicoïdal avec espace annulaire
Cevni sistemi iz polimernih materialov za obnovo podzemnih omrežij za odvodnjavanje in kanalizacijo – 7. del: Oblaganje s spiralnimi cevmi
General Information
- Status
- Withdrawn
- Publication Date
- 20-Mar-2007
- Withdrawal Date
- 19-Feb-2013
- Technical Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 20-Feb-2013
- Completion Date
- 20-Feb-2013
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 02-May-2012
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
EN 13566-7:2007 is a standard published by the European Committee for Standardization (CEN). Its full title is "Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes". This standard covers: This part of EN 13566, read in conjunction with EN 13566-1, specifies requirements and test methods for pipes that are formed on site by spirally winding and jointing a pre-manufactured profiled plastics strip using a winding machine in front of the open end of an existing pipeline (e.g. in a manhole). The pipes thus formed are simultaneously inserted into the existing pipeline by the winding forces. It covers spirally-wound pipes of a fixed diameter made of profiled plastics strips of unplasticized poly(vinyl chloride) (PVC U) with an integral locking mechanism. These spirally-wound pipes are used for renovating non-pressure drainage and sewerage networks and are fixed in place by grouting the annular space. NOTE The grouting procedure is outside the scope of this standard.
This part of EN 13566, read in conjunction with EN 13566-1, specifies requirements and test methods for pipes that are formed on site by spirally winding and jointing a pre-manufactured profiled plastics strip using a winding machine in front of the open end of an existing pipeline (e.g. in a manhole). The pipes thus formed are simultaneously inserted into the existing pipeline by the winding forces. It covers spirally-wound pipes of a fixed diameter made of profiled plastics strips of unplasticized poly(vinyl chloride) (PVC U) with an integral locking mechanism. These spirally-wound pipes are used for renovating non-pressure drainage and sewerage networks and are fixed in place by grouting the annular space. NOTE The grouting procedure is outside the scope of this standard.
EN 13566-7:2007 is classified under the following ICS (International Classification for Standards) categories: 93.030 - External sewage systems. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13566-7:2007 has the following relationships with other standards: It is inter standard links to EN ISO 11296-7:2013, CEN ISO/TS 19139:2009, EN ISO 527-2:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13566-7:2007 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13566-7:2007 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cevni sistemi iz polimernih materialov za obnovo podzemnih omrežij za odvodnjavanje in kanalizacijo – 7. del: Oblaganje s spiralnimi cevmiKunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen Entwässerungsnetzen (Freispiegelleitungen) — Teil 7: Wickelrohr-LiningSystemes de canalisations plastiques pour la rénovation des réseaux d'assainissement enterrés sans pression - Partie 7 : Tubage par enroulement hélicoidal avec espace annulairePlastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes93.030Zunanji sistemi za odpadno vodoExternal sewage systems91.140.80Drenažni sistemiDrainage systems23.040.20Cevi iz polimernih materialovPlastics pipesICS:Ta slovenski standard je istoveten z:EN 13566-7:2007SIST EN 13566-7:2007en,fr,de01-julij-2007SIST EN 13566-7:2007SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13566-7March 2007ICS 93.030 English VersionPlastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining withspirally-wound pipesSystèmes de canalisations plastiques pour la rénovationdes réseaux d'assainissement enterrés sans pression -Partie 7 : Tubage par enroulement hélicoïdal avec espaceannulaireKunststoff-Rohrleitungssysteme für die Renovierung vonerdverlegten drucklosen Entwässerungsnetzen(Freispiegelleitungen) - Teil 7: Wickelrohr-LiningThis European Standard was approved by CEN on 3 February 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13566-7:2007: ESIST EN 13566-7:2007
Recommended scheme for assessment of conformity.15 A.1 Scope.15 A.2 General.15 A.3 Testing and inspection.15 A.3.1 Material specification PVC.15 A.3.2 Grouping.16 A.3.3 Type testing (TT).16 SIST EN 13566-7:2007
Test method for watertightness of SWO pipes whilst
subjected to bending.19 B.1 Scope.19 B.2 Principle.19 B.3 Apparatus.19 B.4 Test piece.20 B.5 Test temperature.20 B.6 Test procedure.20 B.7 Requirements.21 B.8 Test Report.21 Bibliography.22
General Part 2:
Lining with continuous pipes Part 3:
Lining with close-fit pipes Part 4:
Lining with cured-in-place pipes Part 5:
Lining with discrete pipes (possible future work) Part 7:
Lining with spirally-wound pipes (the present standard) A consistent structure of clause headings has been adopted for all parts to facilitate direct comparisons across renovation families. Figure 1 shows the common part and clause structure and the relationship between this standard and the system standards for other applications. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 13566-7:2007
Figure 1 — Format of the renovation system standards SIST EN 13566-7:2007
3 Terms and definitions, symbols and abbreviations 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13566-1:2002 and the following apply. 3.1.1 spirally-wound pipe pipe formed by continuously winding and joining a profiled strip 3.1.2 seam joint between adjacent profiled plastics strips formed by an integral locking mechanism and seam sealant 3.1.3 integral locking mechanism mechanical interlock achieved by suitable design of the edges of the extruded profile 3.1.4 seam sealant thermoplastic or adhesive material added to the integral locking mechanism to make the seam leaktight 3.2 Symbols and abbreviations The symbols and abbreviations given in EN 13566-1:2002 and the following apply. 3.2.1 Symbols Aw cross sectional area of the strip [mm2/mm] de external diameter [mm] ea neutral axis of the strip [mm] eo overall profile height [mm] ew,min minimum waterway wall thickness [mm] ew waterway wall thickness at any point [mm] Iw second moment of area of the strip [mm4/mm] ls length of the test piece for short term tensile force resistance test of the locked seam [mm] S ring stiffness of the pipe [kN/m2] w effective width of the strip [mm] ws width of the test piece for short term tensile force resistance test of the locked seam [mm] 3.2.2 Abbreviations EPDM ethylene-propylene-diene monomer SIST EN 13566-7:2007
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...