EN ISO 11296-7:2013
(Main)Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2011)
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2011)
This part of ISO 11296, in conjunction with Part 1, specifies requirements and test methods for pipes which are
formed on site by spirally winding and jointing a pre-manufactured profiled plastics strip, or a profiled plastics
strip and integral locking joiner strip, and used for the renovation of underground non-pressure drainage and
sewerage networks.
It applies to spirally-wound pipes of fixed or variable diameter installed by one of two methods.
The first method employs a dedicated winding machine in front of the open end of an existing pipeline, e.g. in
a manhole. The pipes thus formed are simultaneously inserted into the existing pipeline by the winding forces,
and by certain techniques can also be expanded in diameter after or during insertion.
The second method employs a dedicated winding machine which forms the pipe as it traverses the existing
pipeline from one manhole to the next.
It covers spirally-wound pipes of fixed or variable diameter made of profiled plastics strips, with or without
steel stiffening elements, of unplasticized poly(vinyl chloride) (PVC‑U) with integral locking mechanism or high
density polyethylene (HDPE) with integrally welded joints.
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen Entwässerungsnetzen (Freispiegelleitungen) -Teil 7: Wickelrohr-Lining (ISO 11296-7:2011)
Dieser Teil von ISO 11296 legt in Verbindung mit ISO 11296-1 die Anforderungen und Prüfverfahren für Rohre fest, die durch spiralförmiges Wickeln und Verbinden eines vorgefertigten profilierten Kunststoff-Streifens oder eines profilierten Kunststoff-Streifens mit integriertem Verbindungsmechanismus vor Ort hergestellt und für die Renovierung von erdverlegten drucklosen Entwässerungsnetzen verwendet werden.
Er gilt für Wickelrohre mit festgelegtem Kreis-Durchmesser oder für variable Durchmesser, die nach einem der beiden Verfahren eingebaut werden.
Beim ersten Verfahren wird eine Wickelmaschine eingesetzt, die sich vor der Öffnung einer bereits bestehenden Rohrleitung, z. B. in einem Einsteigschacht, befindet. Die so hergestellten Rohre werden kontinuierlich durch spiralförmiges Wickeln in die bestehende Rohrleitung eingebracht und können mithilfe bestimmter Verfahren während des oder nach dem Einbringen im Durchmesser aufgeweitet werden.
Beim zweiten Verfahren wird eine Wickelmaschine eingesetzt, die das Rohr herstellt, während diese die bestehende Rohrleitung von einem Einsteigschacht zum nächsten durchquert.
Dieser Teil gilt für Wickelrohre mit festgelegtem oder variablem Durchmesser aus profilierten Kunststoff-Streifen, mit oder ohne Versteifungselemente aus Stahl, aus weichmacherfreiem Polyvinylchlorid (PVC U) mit integriertem Verbindungsmechanismus oder aus Polyethylen hoher Dichte (HDPE) mit integrierten Schweißverbindungen.
Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 7: Tubage par enroulement hélicoïdal avec espace annulaire (ISO 11296-7:2011)
Cevni sistemi iz polimernih materialov za obnovo podzemnih omrežij za odvodnjavanje in kanalizacijo - 7. del: Oblaganje s spiralnimi cevmi (ISO 11296-7:2011)
Ta del standarda ISO 11296 v povezavi s 1. delom določa zahteve in preskusne metode za cevi, ki se tvorijo na mestu s spiralnim navijanjem in spajanjem vnaprej izdelanega plastičnega pasu s profilom ter integralnega zaskočnega spajalnega pasu, ter se uporabljajo za obnovo podzemnih omrežij za odvodjavanje in kanalizacijo brez tlaka. Uporablja se za spiralne cevi enotnega ali spremenljivega obsega, ki se namestijo z eno od dveh metod.
General Information
Relations
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2013
1DGRPHãþD
SIST EN 13566-7:2007
Cevni sistemi iz polimernih materialov za obnovo podzemnih omrežij za
odvodnjavanje in kanalizacijo - 7. del: Oblaganje s spiralnimi cevmi (ISO 11296-
7:2011)
Plastics piping systems for renovation of underground non-pressure drainage and
sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2011)
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen
Entwässerungsnetzen (Freispiegelleitungen) -Teil 7: Wickelrohr-Lining (ISO 11296-
7:2011)
Systèmes de canalisations en plastique pour la rénovation des réseaux de
branchements et de collecteurs d'assainissement enterrés sans pression - Partie 7:
Tubage par enroulement hélicoïdal avec espace annulaire (ISO 11296-7:2011)
Ta slovenski standard je istoveten z: EN ISO 11296-7:2013
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.80 Drenažni sistemi Drainage systems
93.030 Zunanji sistemi za odpadno External sewage systems
vodo
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 11296-7
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2013
ICS 23.040.20; 23.040.45; 23.040.99; 93.030 Supersedes EN 13566-7:2007
English Version
Plastics piping systems for renovation of underground non-
pressure drainage and sewerage networks - Part 7: Lining with
spirally-wound pipes (ISO 11296-7:2011)
Systèmes de canalisations en plastique pour la rénovation Kunststoff-Rohrleitungssysteme für die Renovierung von
des réseaux de branchements et de collecteurs erdverlegten drucklosen Entwässerungsnetzen
d'assainissement enterrés sans pression - Partie 7: Tubage (Freispiegelleitungen) -Teil 7: Wickelrohr-Lining (ISO
par enroulement hélicoïdal avec espace annulaire (ISO 11296-7:2011)
11296-7:2011)
This European Standard was approved by CEN on 5 February 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11296-7:2013: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
The text of ISO 11296-7:2011 has been prepared by Technical Committee ISO/TC 138 “Plastics pipes, fittings
and valves for the transport of fluids” of the International Organization for Standardization (ISO) and has been
taken over as EN ISO 11296-7:2013 by Technical Committee CEN/TC 155 “Plastics piping systems and
ducting systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2013, and conflicting national standards shall be withdrawn at
the latest by August 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13566-7:2007.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 11296-7:2011 has been approved by CEN as EN ISO 11296-7:2013 without any modification.
INTERNATIONAL ISO
STANDARD 11296‑7
First edition
2011-11-01
Plastics piping systems for renovation of
underground non‑pressure drainage and
sewerage networks —
Part 7:
Lining with spirally‑wound pipes
Systèmes de canalisations en plastique pour la rénovation des réseaux
de branchements et de collecteurs d’assainissement enterrés sans
pression —
Partie 7: Tubage par enroulement hélicoïdal avec espace annulaire
Reference number
ISO 11296-7:2011(E)
©
ISO 2011
ISO 11296‑7:2011(E)
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved
ISO 11296‑7:2011(E)
Contents Page
Foreword .iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Symbols and abbreviated terms . 3
4.1 Symbols . 3
4.2 Abbreviated terms . 3
5 Pipes at the “M” stage . 3
5.1 Materials . 3
5.2 General characteristics . 4
5.3 Material characteristics . 4
5.4 Geometric characteristics . 5
5.5 Mechanical characteristics . 6
5.6 Physical characteristics . 6
5.7 Jointing . 6
5.8 Marking . 6
6 Fittings at the “M” stage . 7
7 Ancillary components . 7
8 Fitness for purpose of the installed lining system at the “I” stage . 7
8.1 Materials . 7
8.2 General characteristics . 7
8.3 Material characteristics . 7
8.4 Geometric characteristics . 7
8.5 Mechanical characteristics . 7
8.6 Physical characteristics . 8
8.7 Additional characteristics . 8
8.8 Preparation of samples . 8
8.9 Adhesives . 8
9 Installation practice . 8
9.1 Preparatory work . 8
9.2 Storage, handling and transportation of profiled plastics strips and fittings . 8
9.3 Equipment . 8
9.4 Installation . 9
9.5 Process‑related inspection and testing .10
9.6 Lining termination .10
9.7 Reconnecting to existing manholes and laterals .10
9.8 Final inspection and testing .10
9.9 Documentation .10
Annex A (normative) Spirally‑wound pipe — Test method for watertightness in a deflected condition . 11
Annex B (informative) Examples of methods for reconnecting and sealing laterals to SWO pipe .14
Bibliography .16
© ISO 2011 – All rights reserved iii
ISO 11296‑7:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.