EN 1775:1998
(Main)Gas supply - Gas pipework for buildings - Maximum operating pressure <= 5 bar - Functional recommendations
Gas supply - Gas pipework for buildings - Maximum operating pressure <= 5 bar - Functional recommendations
1.1 This standard specifies the general recommendations for the design, construction, testing, commissioning, operation and maintenance of installation pipework, that is the pipework between the point of delivery of the gas and the inlet connection to the gas appliance. This standard specifies common basic principles for gas installation pipework. Users of this European standard should be aware that more detailed national standards and/or codes of practice may exist in the CEN member countries.
Gasversorgung - Gasleitungsanlagen für Gebäude - Maximal zulässiger Betriebsdruck <= 5 bar - Funktionale Empfehlungen
Die vorliegende Norm beschreibt allgemeine Empfehlungen für Planung, Errichtung, Prüfung, Inbetriebnahme, Betrieb und Instandhaltung von Installationsleitungen. Dies sind Leitungsanlagen zwischen der Übergabestelle und der Geräteeingangsverbindung. Diese Norm beschreibt die allgemeinen Grundsätze für Gasinstallationsleitungen. Die Anwender dieser Norm sollten sich bewußt sein, daß detailliertere Technische Regeln und/oder nationale Normen in den CEN-Mitgliedsländern existieren können.
Alimentation en gaz- Tuyauterie de gaz pour les bâtiments - Pression maximale de service <= 5 bar - Recommandations fonctionnelles
La présente norme spécifie les recommandations générales pour la conception, la construction, les essais, la mise en service, l'exploitation et la maintenance des installations intérieures, c'est-à-dire la tuyauterie située entre le point de livraison du gaz et le raccord d'entrée des appareils d'utilisation du gaz. La présente norme spécifie les principes de base communs pour les installations intérieures. Il convient que les utilisateurs de la présente norme gardent à l'esprit l'existence éventuelle, dans les pays membres du CEN, de codes de pratique et/ou de normes nationales plus détaillés.
Oskrba s plinom - Plinovod za stavbe - Najvišji delovni tlak do vključno 5 bar - Funkcionalna priporočila
General Information
- Status
- Withdrawn
- Publication Date
- 20-Jan-1998
- Withdrawal Date
- 31-Jul-2007
- Technical Committee
- CEN/TC 234 - Gas infrastructure
- Drafting Committee
- CEN/TC 234/WG 1 - Gas installations
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Aug-2007
- Completion Date
- 01-Aug-2007
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 09-Feb-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard

ICC Evaluation Service
Building products evaluation and certification.

QAI Laboratories
Building and construction product testing and certification.

Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
EN 1775:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Gas supply - Gas pipework for buildings - Maximum operating pressure <= 5 bar - Functional recommendations". This standard covers: 1.1 This standard specifies the general recommendations for the design, construction, testing, commissioning, operation and maintenance of installation pipework, that is the pipework between the point of delivery of the gas and the inlet connection to the gas appliance. This standard specifies common basic principles for gas installation pipework. Users of this European standard should be aware that more detailed national standards and/or codes of practice may exist in the CEN member countries.
1.1 This standard specifies the general recommendations for the design, construction, testing, commissioning, operation and maintenance of installation pipework, that is the pipework between the point of delivery of the gas and the inlet connection to the gas appliance. This standard specifies common basic principles for gas installation pipework. Users of this European standard should be aware that more detailed national standards and/or codes of practice may exist in the CEN member countries.
EN 1775:1998 is classified under the following ICS (International Classification for Standards) categories: 91.140.40 - Gas supply systems. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1775:1998 has the following relationships with other standards: It is inter standard links to EN 1775:2007, EN 50194-1:2009, EN 15266:2007, EN 14800:2007, EN 81-31:2010, EN 1775:1998/A1:2000, EN 1775:1998/A2:2000. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1775:1998 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC, 93/38/EEC; Standardization Mandates: M/017, M/131. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1775:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-1998
2VNUEDVSOLQRP3OLQRYRG]DVWDYEH1DMYLãMLGHORYQLWODNGRYNOMXþQREDU
)XQNFLRQDOQDSULSRURþLOD
Gas supply - Gas pipework for buildings - Maximum operating pressure <= 5 bar -
Functional recommendations
Gasversorgung - Gasleitungsanlagen für Gebäude - Maximal zulässiger Betriebsdruck
<= 5 bar - Funktionale Empfehlungen
Alimentation en gaz-
...




Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...