Fire detection and fire alarm systems - Part 24: Components of voice alarm systems - Loudspeakers

This European Standard specifies requirements, test methods and performance criteria for loudspeakers intended to broadcast a warning of fire between a fire detection and fire alarm system and the occupants of a building.
This European Standard specifies loudspeakers for two types of application environment: type A, generally for indoor use and type B, generally for outdoor use.
This European Standard does not cover loudspeakers for special applications, for example loudspeaker for use in hazardous applications, if such applications require additional or other requirements or tests than those given in this European Standard.
This European Standard is not intended to cover addressable loudspeakers, loudspeakers with active components.
Voice alarm sounders are covered in EN 54-3:2001.

Brandmeldeanlagen - Teil 24: Komponenten für Sprachalarmierungssysteme - Lautsprecher

Diese Europäische Norm legt die Anforderungen, Prüfverfahren und Leistungskriterien für Lautsprecher fest, die für die Übertragung von Brandfalldurchsagen als Bindeglied zwischen einer Brandmeldeanlage und den Benutzern eines Gebäudes vorgesehen sind.
In dieser Europäische Norm werden Festlegungen für zwei Arten der Einsatzumgebung von Lautsprechern getroffen: für Lautsprecher für Typ A, im Allgemeinen für den Innenbereich anzuwenden und Typ B, im Allgemeinen für den Außenbereich anzuwenden.
Diese Europäische Norm behandelt keine Lautsprecher für Sonderanwendungen, z. B. Lautsprecher zum Einsatz in explosionsgefährdeten Bereichen, sofern diese Anwendungen zusätzliche oder weitere Anforderungen oder Prüfungen erfordern, als die in dieser Norm enthaltenen.
Diese Europäische Norm gilt nicht für adressierbare Lautsprecher und Lautsprecher mit aktiven Elementen.
Akustische Signalgeber werden in EN 54 3:2001 behandelt.

Systèmes de détection et d'alarme incendie - Partie 24 : Composants des systèmes d'alarme vocale - Haut-parleurs

La présente partie de la Norme européenne spécifie les exigences, les méthodes d’essai et les critères de performance pour les haut-parleurs destinés à diffuser un avertissement d’incendie, depuis le système de détection et d’alarme incendie vers les occupants d’un bâtiment.
La présente partie de la Norme européenne définit les exigences concernant les haut-parleurs pour les deux types d’environnement d’utilisation suivants : le type A pour l’utilisation habituelle en intérieur et le type B pour l’utilisation habituelle en extérieur.
La présente partie de la Norme européenne ne couvre pas les haut-parleurs destinés à des applications particulières, comme par exemple les haut-parleurs utilisés dans des applications dangereuses, si ces applications requièrent des exigences complémentaires ou alors des exigences ou essais différents de ceux fournis dans la présente partie de la Norme européenne.
La présente partie de la Norme européenne n’est pas destinée à traiter les haut-parleurs adressables ou des haut-parleurs dotés de composants actifs.
Les dispositifs sonores d’alarme vocale sont traités dans l’EN 54-3:2001.

Sistemi za odkrivanje in javljanje požara ter alarmiranje - 24. del: Sestavni deli zvočnih sistemov za javljanje požara - Zvočniki

General Information

Status
Published
Publication Date
01-Apr-2008
Withdrawal Date
29-Apr-2011
Current Stage
9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
Completion Date
22-Jul-2021

Buy Standard

Standard
EN 54-24:2008
English language
58 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2008
6LVWHPL]DRGNULYDQMHLQMDYOMDQMHSRåDUDWHUDODUPLUDQMHGHO6HVWDYQLGHOL
]YRþQLKVLVWHPRY]DMDYOMDQMHSRåDUD=YRþQLNL
Fire detection and fire alarm systems - Part 24: Components of voice alarm systems -
Loudspeakers
Brandmeldeanlagen - Teil 24: Komponenten für Sprachalarmierungssysteme -
Lautsprecher
Systemes de détection et d'alarme incendie - Composants des systemes d'alarme
vocale - Partie 24 : Haut-parleurs
Ta slovenski standard je istoveten z: EN 54-24:2008
ICS:
13.220.20 3RåDUQD]DãþLWD Fire protection
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 54-24
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2008
ICS 13.310
English Version
Fire detection and fire alarm systems - Part 24: Components of
voice alarm systems - Loudspeakers
Systèmes de détection et d'alarme incendie - Composants Brandmeldeanlagen - Teil 24: Komponenten für
des systèmes d'alarme vocale - Partie 24 : Haut-parleurs Sprachalarmierungssysteme - Lautsprecher
This European Standard was approved by CEN on 23 February 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 54-24:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.4
Introduction .6
1 Scope .7
2 Normative references .7
3 Terms, definitions and abbreviations.8
3.1 Terms and definitions .8
3.2 Abbreviations.11
4 Requirements.11
4.1 Compliance.11
4.2 Frequency response limits .11
4.3 Durability .12
4.4 Construction.12
4.4.1 Provision for external conductors .12
4.4.2 Materials .12
4.4.3 Enclosure protection.12
4.4.4 Access .12
4.5 Marking and data .12
4.5.1 Marking .12
4.5.2 Information in the product data sheet .13
5 Tests.14
5.1 General.14
5.1.1 Atmospheric conditions for tests .14
5.1.2 Operating conditions for tests .14
5.1.3 Mounting arrangements.14
5.1.4 Tolerances .14
5.1.5 Frequency response measurement and sensitivity calculation .14
5.1.6 Frequency response measurement and sensitivity calculation for loudspeakers requiring
dedicated system equalization.16
5.1.7 Provision for tests .16
5.1.8 Test schedule.16
5.2 Reproducibility.18
5.2.1 Object of the test.18
5.2.2 Test procedure.18
5.2.3 Test requirements.18
5.3 Rated impedance .18
5.3.1 Object of the test.18
5.3.2 Test procedure.18
5.3.3 Test requirements.19
5.4 Horizontal and vertical coverage angles.19
5.4.1 Object of the test.19
5.4.2 Test procedure.19
5.4.3 Test requirement.20
5.5 Maximum sound pressure level .20
5.5.1 Object of the test.20
5.5.2 Test procedure.20
5.5.3 Test requirements.20
5.6 Rated noise power (durability) .21
5.6.1 Object of the test.21
5.6.2 Test procedure.21
5.6.3 Test requirement: .21
5.7 Dry heat (operational) .21
5.7.1 Object of the test .21
5.7.2 Test procedure.22
5.7.3 Test requirements .22
5.8 Dry heat (endurance).22
5.8.1 Object of the test .22
5.8.2 Test procedure.23
5.8.3 Test requirements .23
5.9 Cold (operational).23
5.9.1 Object of the test .23
5.9.2 Test procedure.24
5.9.3 Test requirements .24
5.10 Damp heat, cyclic (operational) .25
5.10.1 Object of the test .25
5.10.2 Test procedure.25
5.10.3 Test requirements .25
5.11 Damp heat, steady state (endurance).26
5.11.1 Object of the test .26
5.11.2 Test procedure.26
5.11.3 Test requirements .26
5.12 Damp heat, cyclic (endurance) .27
5.12.1 Object of the test .27
5.12.2 Test procedure.27
5.12.3 Test requirements .27
5.13 Sulfur dioxide (SO ) corrosion (endurance) .28
5.13.1 Object of the test .28
5.13.2 Test procedure.28
5.13.3 Test requirements .28
5.14 Shock (operational) .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.