EN 16954:2018
(Main)Agglomerated stone - Slabs and cut-to-size products for flooring and stairs (internal and external)
Agglomerated stone - Slabs and cut-to-size products for flooring and stairs (internal and external)
This draft European Standard specifies characteristics and appropriate test methods for slabs and cut to size products (cut to size slabs, special pieces, treads and risers) of agglomerated stones, which are made for use as flooring and stairs in pedestrian areas for internal and external uses including those in enclosed public transport premises. It also provides for the assessment and verification of constancy of performance (AVCP) and marking of the products to the requirements of this draft European Standard.
This draft European Standard covers tactility but only for products the intended use of which requires this performance.
This draft European Standard does not cover visibility requirements. Rough slabs are excluded from the scope of this draft European Standard.
Products covered by the standards EN 15285, EN 13198, EN 13748 1 and EN 13748 2 are also excluded from the scope of the present European Standard.
Künstlich hergestellter Stein - Platten und zugeschnittene Produkte für Boden- und Stufenbeläge (innen und außen)
Dieser Europäische Norm-Entwurf legt Anforderungen an und geeignete Prüfverfahren für Platten und zugeschnittene Produkte (zugeschnittene Platten, Einzelstücke sowie Tritt- und Setzstufen) aus künstlich hergestellten Steinen zur Verwendung als Boden- und Stufenbeläge in Fußgängerbereichen für Innen- und Außenanwendungen einschließlich innenliegende Einrichtungen des öffentlichen Verkehrs fest. Sie dient ebenfalls der Konformitätsbewertung und der Kennzeichnung der Produkte entsprechend den Anforderun¬gen dieses Europäischen Norm-Entwurfes.
Dieser Europäische Norm-Entwurf deckt taktile Eigenschaften ab, jedoch nur für Produkte, deren beabsichtigte Anwendung dieses Merkmal erfordert.
Dieser Europäische Norm-Entwurf deckt nicht Anforderungen an visuell erfassbare Eigenschaften ab. Rohplatten sind vom Anwendungsbereich dieses Europäischen Norm-Entwurfes ausgeschlossen.
Produkte, die von den Normen EN 15285, EN 13198, EN 13748 1 und EN 13748 2 abgedeckt sind, sind ebenfalls vom Anwendungsbereich des vorliegenden Europäischen Norm-Entwurfes ausgeschlossen.
Pierre agglomérée - Plaques et produits coupés sur mesure pour revêtements de sols et escaliers (intérieurs et extérieurs)
La présente Norme européenne spécifie les exigences et les méthodes d’essai appropriées pour les plaques et produits coupés sur mesure (plaques coupées sur mesure, pièces spéciales, marches et contremarches) en pierre agglomérée fabriqués pour être utilisés comme revêtements de sols et escaliers dans les zones piétonnières en usage interne et externe, y compris dans des locaux de transport public. Elle prévoit également l’évaluation de la conformité et le marquage des produits conformément aux exigences de la présente Norme européenne.
La présente norme couvre la tactilité, mais uniquement pour les produits dont l’utilisation prévue l’exige.
La présente norme ne couvre pas les exigences de visibilité. Les dalles brutes sont exclues du domaine d’application de la présente norme.
Les produits couverts par les normes EN 15285, EN 13198, EN 13748-1 et EN 13748-2 sont également exclus du domaine d’application de la présente norme.
Aglomeriran kamen - Plošče in po meri izdelani proizvodi za tla in stopnice (notranje in zunanje)
Ta osnutek evropskega standarda določa zahteve in primerne preskusne metode za plošče in po meri izdelane proizvode (po meri izdelane plošče, posebni deli, pohodne ploskve in navpični deli) iz aglomeriranega kamna, ki so izdelani za tla in stopnice na območjih za pešce, za notranjo in zunanjo uporabo, vključno s pokritimi prostori za javni prevoz. Prav tako podaja pravila za vrednotenje skladnosti in označevanje izdelkov v skladu z zahtevami tega osnutka evropskega standarda.
Ta osnutek evropskega standarda zajema otipljivost, vendar samo za izdelke, namenjene za takšno uporabo, ki zahteva to lastnost.
Ta osnutek evropskega standarda ne zajema zahtev glede vidljivosti. Področje uporabe tega evropskega standarda ne zajema surovih plošč.
Izdelki, ki jih zajemajo standardi EN 15285, EN 13198, EN 13748 1 in EN 13748 2, so izključeni iz obsega tega osnutka evropskega standarda.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Künstlich hergestellter Stein - Platten und zugeschnittene Produkte für Boden- und Stufenbeläge (innen und außen)Pierre agglomérée - Plaques et produits coupés sur mesure pour revêtements de sols et escaliers (intérieurs et extérieurs)Agglomerated stone - Slabs and cut-to-size products for flooring and stairs (internal and external)91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 16954:2018SIST EN 16954:2018en,fr,de01-julij-2018SIST EN 16954:2018SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16954
May
t r s z ICS
{ sä s r rä s w English Version
Agglomerated stone æ Slabs and cutætoæsize products for Pierre agglomérée æ Plaques et produits coupés sur mesure pour revêtements de sols et escaliers
Künstlich hergestellter Stein æ Platten und zugeschnittene Produkte für Bodenæ und Stufenbeläge This European Standard was approved by CEN on
t y December
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x { w vã t r s z ESIST EN 16954:2018
European foreword . 4 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Characteristics . 8 4.1 Geometric characteristics . 8 4.1.1 Dimensions . 8 4.1.2 Tolerances for dimensions for slabs and cut-to-size products . 8 4.1.3 Surface finish . 9 4.2 Physical and mechanical characteristics . 10 4.2.1 General . 10 4.2.2 Visual appearance . 10 4.2.3 Reaction to fire . 10 4.2.4 Apparent density and water absorption. 11 4.2.5 Flexural tensile strength . 11 4.2.6 Thermal conductivity . 11 4.2.7 Thermal shock resistance . 11 4.2.8 Linear thermal expansion coefficient . 11 4.2.9 Abrasion resistance . 11 4.2.10 Chemical resistance . 11 4.2.11 Slip resistance . 11 4.2.12 Electrical resistivity . 12 4.2.13 Tactility . 12 4.2.14 Durability . 12 4.2.15 Release of dangerous substances . 12 5 Test methods . 12 6 Assessment and verification of constancy of performance – AVCP. 12 6.1 General . 12 6.2 Type testing . 13 6.2.1 General . 13 6.2.2 Test samples, testing and compliance criteria . 14 6.2.3 Test reports . 14 6.2.4 Shared other party results . 15 6.3 Factory production control (FPC) . 15 6.3.1 General . 15 6.3.2 Requirements . 16 6.3.3 Product specific requirements . 18 6.3.4 Initial inspection of factory and of FPC . 19 6.3.5 Continuous surveillance of FPC . 19 6.3.6 Procedure for modifications . 19 7 Marking, labelling and packaging . 20 SIST EN 16954:2018
Reference sample, visual inspection and acceptance criteria . 21 Annex ZA (informative)
Relationship of this European Standard with Regulation (EU) No.305/2011 . 23 Bibliography . 28
EN 15285 Modular tiles for flooring and stairs (int. and ext.)
(under M/119)
EN 16954 Slabs and cut-to-size products for flooring and stairs (int. and ext.) (under Mandate M/119)
EN 15286 Cladding slabs and tiles for wall finishes (int. and ext.)
(under Mandate M/121) Non-harmonized product standards
EN 15388 Slabs and cut-to-size products for vanity and kitchen tops
Main supporting standards
EN 14617 (all parts), Test methods
EN 14618,
Terminology and classification
• IEC Electropedia: available at http://www.electropedia.org/ • ISO Online browsing platform: available at http://www.iso.org/obp 3.1 rough slab semi-finished agglomerated stone product with edges obtained either by sawing from a block or by moulding, the size of which is given by nominal dimensions (length - width -, thickness, in this order), expressed in millimetres and the surface of which may or may not be the finished surface Note 1 to entry:
Examples are given in Figure 1. SIST EN 16954:2018
Figure 1 — Examples of rough slabs 3.2 slab finished agglomerated product obtained from rough slabs, the dimensions of which are given by length - width - thickness (in this order)
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.