EN 14617-9:2005
(Main)Agglomerated stone - Test methods - Part 9: Determination of impact resistance
Agglomerated stone - Test methods - Part 9: Determination of impact resistance
This document specifies a method for determining the impact resistance of agglomerated flat stone products.
Künstlich hergestellter Stein - Prüfverfahren - Teil 9: Bestimmung der Schlagfestigkeit
Dieses Dokument legt ein Verfahren zur Bestimmung der Schlagfestigkeit von ebenen Produkten aus
künstlich hergestelltem Stein fest.
Pierre agglomérée - Méthodes d'essai - Partie 9: Détermination de la résistance aux chocs
Le présent document spécifie une méthode de détermination de la résistance aux chocs des produits plats en pierres agglomérées.
Aglomeriran kamen - Preskusne metode - 9. del: Ugotavljanje udarne odpornosti
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2005
Aglomeriran kamen - Preskusne metode - 9. del: Ugotavljanje udarne odpornosti
Agglomerated stone - Test methods - Part 9: Determination of impact resistance
Künstlich hergestellter Stein - Prüfverfahren - Teil 9: Bestimmung der Schlagfestigkeit
Pierre agglomérée - Méthodes d'essai - Partie 9: Détermination de la résistance aux
chocs
Ta slovenski standard je istoveten z: EN 14617-9:2005
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 14617-9
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2005
ICS 91.100.15
English version
Agglomerated stone - Test methods - Part 9: Determination of
impact resistance
Pierre agglomérée - Méthodes d'essai - Partie 9: Künstlich hergestellter Stein - Prüfverfahren - Teil 9:
Détermination de l'énergie de rupture Bestimmung der Schlagfestigkeit
This European Standard was approved by CEN on 3 February 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14617-9:2005: E
worldwide for CEN national Members.
Contents
Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Principle.4
4 Apparatus .4
5 Preparation of the specimens .4
6 Test procedure.4
7 Expression of results .5
8 Test report .5
Bibliography .6
Foreword
This document (EN 14617-9:2005) has been prepared by Technical Committee CEN/TC 246 “Natural stones”, the
secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by September 2005, and conflicting national standards shall be withdrawn at the
latest by September 2005.
Test methods for agglomerated stones consist of the following:
EN 14617-1, Agglomerated stone - Test methods – Part 1: Determination of apparent density and water absorption
EN 14617-2, Agglomerated stone – Test methods – Part 2: Determination of flexural strength (bending)
prEN 14617-3, Agglomerated stone - Test methods – Part 3: Determination of slipperiness
EN 14617-4, Agglomerated stone - Test methods – Part 4: Determination of the abrasion resistance
EN 14617-5, Agglomerated stone - Test methods – Part 5: Determination of freeze and thaw resistance
EN 14617-6, Agglomerated stone - Test methods – Part 6: Determination of thermal shock resistance
prEN 14617-7, Agglomerated stone – Test methods – Part 7: Determination of ageing
prEN 14617-8, Agglomerated stone – Test methods – Part 8: Determination of resistance to fixing (dowel hole)
EN 14617-9, Agglomerated stone - Test methods – Part 9: Determination of impact
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.