EN 818-6:2000
(Main)Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer
Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer
This Part of EN 818 specifies the information on use and maintenance to be provided by the manufacturer with chain slings conforming to EN 818-4 and EN 818-5. Annex A is informative, and provides some of the detailed information for use and maintenance which may be appropriate. The hazards covered by this Part of EN 818 are identified in clause 4.
Kurzgliedrige Rundstahlketten für Hebezwecke - Sicherheit - Teil 6: Anschlagketten - Festlegungen zu Informationen über Gebrauch und Instandhaltung, die vom Hersteller zur Verfügung zu stellen sind
Dieser Teil von EN 818 enthält Informationen über den Gebrauch und die Instandhaltung die vom Hersteller mit Anschlagketten nach EN 818-4:1996 und prEN 818-5 zur Verfügung zu stellen wird. Die Gefährdungen, die durch diesen Teil von EN 818 abgedeckt werden, sind in Abschnitt 4 aufgeführt. Anhang A ist informativ und stellt detaillierte Angaben über Gebrauch und Instandhaltung, soweit zutreffend, zur Verfügung.
Chaînes de levage à maillons courts - Sécurité - Partie 6: Elingues en chaînes - Spécification pour l'information sur l'utilisation et la maintenance qui doit être fournie par le fabricant
La présente partie de l'EN 818 spécifie les informations relatives à l'utilisation et à l'entretien à fournir par le fabricant avec les élingues en chaînes conformes aux normes EN 818-4 et prEN 818-5. L'annexe A est informative et fournit certaines informations détaillées relatives à l'utilisation et à l' entretien, susceptibels d'être appropriées. Les phénomènes dangeureux couverts par cette partie de l'EN 818 sont identifiés à l'article 4.
Kratkočlene okrogle verige za dvigovalne namene - Varnost - 6. del: Obesne verige - Podatki in navodila za uporabo in vzdrževanje, ki jih mora preskrbeti proizvajalec
General Information
- Status
- Withdrawn
- Publication Date
- 18-Jan-2000
- Withdrawal Date
- 01-Apr-2008
- Technical Committee
- CEN/TC 168 - Chains, ropes, webbing, slings and accessories - safaty
- Drafting Committee
- CEN/TC 168/WG 1 - Welded round steel link chains and chain slings
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 02-Apr-2008
- Completion Date
- 02-Apr-2008
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 18-Jan-2023
- Effective Date
- 28-Jan-2026
- Referred By
EN 1677-1:2000+A1:2008 - Components for slings - Safety - Part 1: Forged steel components, Grade 8 - Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
EN 818-6:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer". This standard covers: This Part of EN 818 specifies the information on use and maintenance to be provided by the manufacturer with chain slings conforming to EN 818-4 and EN 818-5. Annex A is informative, and provides some of the detailed information for use and maintenance which may be appropriate. The hazards covered by this Part of EN 818 are identified in clause 4.
This Part of EN 818 specifies the information on use and maintenance to be provided by the manufacturer with chain slings conforming to EN 818-4 and EN 818-5. Annex A is informative, and provides some of the detailed information for use and maintenance which may be appropriate. The hazards covered by this Part of EN 818 are identified in clause 4.
EN 818-6:2000 is classified under the following ICS (International Classification for Standards) categories: 53.020.30 - Accessories for lifting equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 818-6:2000 has the following relationships with other standards: It is inter standard links to EN 818-6:2000+A1:2008, EN 1677-4:2000+A1:2008, EN 1677-1:2000+A1:2008, EN 818-6:2000/prA1. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 818-6:2000 is associated with the following European legislation: EU Directives/Regulations: 98/37/EC; Standardization Mandates: M/BC/CEN/91/1. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 818-6:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2001
.UDWNRþOHQHRNURJOHYHULJH]DGYLJRYDOQHQDPHQH9DUQRVWGHO 2EHVQHYHULJH
3RGDWNLLQQDYRGLOD]DXSRUDERLQY]GUåHYDQMHNLMLKPRUDSUHVNUEHWLSURL]YDMDOHF
Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for
information for use and maintenance to be provided by the manufacturer
Kurzgliedrige Rundstahlketten für Hebezwecke - Sicherheit - Teil 6: Anschlagketten -
Festlegungen zu Informationen über Gebrauch und Instandhaltung, die vom Her
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...