iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1391:1998

(Main)

Adhesives for leather and footwear materials - A method for evaluating the bondability of materials - Minimum requirements and material classification

Adhesives for leather and footwear materials - A method for evaluating the bondability of materials - Minimum requirements and material classification

This European Standard specifies a method for evaluating the bondability of leather and footwear materials in particular soling and upper materials in stuck-on assemblies using solvent-based or dispersion adhesives under specified conditions.

Klebstoffe für Leder und Schuhwerkstoffe - Verfahren zur Beurteilung der Klebbarkeit von Werkstoffen - Mindestanforderungen und Werkstoffklassifikation

Diese Norm legt ein Verfahren zur Beurteilung der Klebbarbeit von Leder und Schuhwerkstoffen in Klebungen mit Lösemittel- oder Dispersionsklebstoffen under definierten Bedingungen, insbesondere von Sohlen- und Schaftwerkstoffen, fest.

Adhésifs pour cuir et matériaux de la chaussure - Une méthode d'évaluation de l'aptitude à l'adhésion - Prescriptions minimales et classification des matériaux

La présente norme spécifie une méthode d'évaluation de l'aptitude à l'adhésion dans des conditions spécifiées du cuir et des matériaux de la chaussure, et notamment des matériaux de semelle et de dessus utilisant des adhésifs à base de solvants ou à dispersion dans des conditions spécifiées.

Lepila za usnje in obutvene materiale – Metoda za vrednotenje vezivnosti materialov – Minimalne zahteve in razvrstitev materialov

General Information

Status
Withdrawn
Publication Date
17-Feb-1998
Withdrawal Date
22-May-2007
ICS
61.060 - Footwear
83.180 - Adhesives
Technical Committee
CEN/TC 193 - Adhesives
Drafting Committee
CEN/TC 193/WG 5 - Adhesives for leather and footwear
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
23-May-2007
Completion Date
23-May-2007
Ref Project
SIST EN 1391:1999 - Adhesives for leather and footwear materials - A method for evaluating the bondability of materials - Minimum requirements and material classification

Relations

Replaced By
EN 15307:2007 - Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements
Effective Date
22-Dec-2008

Buy Standard

EN 1391:1999EN 1391:1999
PreviousNext
Standard
EN 1391:1999
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lepila za usnje in obutvene materiale – Metoda za vrednotenje vezivnosti materialov – Minimalne zahteve in razvrstitev materialovKlebstoffe für Leder und Schuhwerkstoffe - Verfahren zur Beurteilung der Klebbarkeit von Werkstoffen - Mindestanforderungen und WerkstoffklassifikationAdhésifs pour cuir et matériaux de la chaussure - Une méthode d'évaluation de l'aptitude a l'adhésion - Prescriptions minimales et classification
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TR 15990:2021(Main)
Data sheets - Footwear tests materials and test adhesives
SIST-TP CEN/TR 15990:2021

For research, development and quality certification purposes, some simply formulated 1- and 2-part “reference test adhesives” have been developed and, from the most important and most often applied, some materials have been selected as “reference test materials”. This document offers for each of these reference test adhesives and reference test materials some information and specify some properties. CEN/TC 193/WG 5 takes care for a continuous updating of these data sheets.

  • Technical report
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1392:2006(Main)
Adhesives for leather and footwear materials-Solvent-based and dispersion adhesives-Testing of bond strength under specified conditions
SIST EN 1392:2006

This European Standard specifies the testing of some strength properties of bonds of leather and footwear materials, in stuck-on assemblies using solvent-based and dispersion adhesives, under different conditions. These can be chosen taking into account the different stresses that such bonds are subjected to, depending on the type of footwear.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 15990:2021(Main)
Data sheets - Footwear tests materials and test adhesives
SIST-TP CEN/TR 15990:2021

For research, development and quality certification purposes, some simply formulated 1- and 2-part “reference test adhesives” have been developed and, from the most important and most often applied, some materials have been selected as “reference test materials”. This document offers for each of these reference test adhesives and reference test materials some information and specify some properties. CEN/TC 193/WG 5 takes care for a continuous updating of these data sheets.

  • Technical report
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1392:2006(Main)
Adhesives for leather and footwear materials-Solvent-based and dispersion adhesives-Testing of bond strength under specified conditions
SIST EN 1392:2006

This European Standard specifies the testing of some strength properties of bonds of leather and footwear materials, in stuck-on assemblies using solvent-based and dispersion adhesives, under different conditions. These can be chosen taking into account the different stresses that such bonds are subjected to, depending on the type of footwear.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3581:2023(Main)
Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO 3581:2023)
SIST EN ISO 3581:2023

This document specifies requirements for classification of covered electrodes, based on the all-weld metal chemical composition, the type of electrode covering and other electrode properties, and the all-weld metal mechanical properties, in the as-welded or heat-treated conditions, for manual metal arc welding of stainless and heat-resisting steels.
This document is a combined standard providing for classification utilizing a system based upon classification according to nominal composition or utilizing a system based upon classification according to alloy type.
a)       Paragraphs and tables which carry the label “classification according to nominal composition-A” or “ISO 3581-A” are applicable only to products classified to that system.
b)       Paragraphs and tables which carry the label “classification according to alloy type-B” or “ISO 3581-B” are applicable only to products classified to that system.
c)        Paragraphs and tables which carry neither label are applicable to products classified according to either or both systems.
Annex B gives information on considerations on weld metal ferrite content.

  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11363-1:2018/A1:2023(Amendment)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
SIST EN ISO 11363-1:2018/A1:2023
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4880:2023(Main)
Aerospace series - General technical specification for standard parts
kSIST FprEN 4880:2022
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18743:2015/A1:2023(Amendment)
Microbiology of the food chain - Detection of Trichinella larvae in meat by artificial digestion method - Amendment 1: Method validation studies and performance characteristics (ISO 18743:2015/Amd 1:2023)
SIST EN ISO 18743:2015/A1:2023
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52924:2023(Main)
Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM 52924:2023)
SIST EN ISO/ASTM 52924:2023

This document establishes the required or the achievable classes of part properties for additive manufactured polymer parts in order to get a common understanding on part quality. It is aimed at providers of manufacturing services for polymer parts who use additive manufacturing machines and at the customers for these services. Designers of parts as well as buyers and providers of manufacturing services can specify, in a traceable manner, the required or the achievable level of part properties with the aid of this document. The classification is based on mechanical, physical and geometrical properties. Further properties can be defined between buyer and provider of manufacturing.
This document is applicable to parts that have been manufactured from a thermoplastic polymer by means of thermal reaction fusion of material typically applied by a powder bed fusion (PBF) or material extrusion (MEX) processes. This document is also applicable to thermoplastic parts made by other processes, provided that due consideration is given to process-specific topics.
The classification of part properties applies to parts in as-built condition, that have been unpacked from the build space, with all support structures removed, but prior to any post-processing operations.
Specific industries (e.g. aerospace and medical) typically specify additional requirements.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11267:2023(Main)
Soil quality - Inhibition of reproduction of Collembola (Folsomia candida) by soil contaminants (ISO 11267:2023)
SIST EN ISO 11267:2023

This document specifies one of the methods for evaluating the habitat function of soils and determining effects of soil contaminants and substances on the reproduction of Folsomia candida Willem by dermal and alimentary uptake. This document also provides information on how to use this method for testing substances under temperate conditions.
The chronic test described is applicable to soils and soil materials of unknown quality, e.g. from contaminated sites, amended soils, soils after remediation, industrial, agricultural or other sites of concern and waste materials.
The method is not applicable to volatile substances, i.e. substances for which H (Henry's constant) or the air/water partition coefficient is greater than 1, or for which the vapour pressure exceeds 300 Pa at 25 °C.

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day