EN 12697-2:2015
(Main)Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
This European Standard specifies a procedure for the determination of the particle size distribution of the aggregates of bituminous mixtures by sieving. The test is applicable to aggregates recovered after binder extraction in accordance with EN 12697-1 or EN 12697-39.
The applicability of this European Standard is described in the product standards for bituminous mixtures.
NOTE Fibres, solid (non-soluble during extraction) additives and (some) binder modifiers influence the test result.
Asphalt - Prüfverfahren - Teil 2: Korngrößenverteilung
Diese Europäische Norm legt ein Verfahren für die Bestimmung der Korngrößenverteilung der Gesteinskör-nungen in Asphalt mittels Siebanalyse fest. Die Prüfung ist für Gesteinskörnungen, die nach Extraktion des Bindemittels nach EN 12697-1 oder EN 12697-39 rückgewonnen wurden, anwendbar.
Die Anwendbarkeit dieser Europäischen Norm ist in den Produktnormen für Asphalt beschrieben.
ANMERKUNG Fasern, feste Zusatzstoffe (die bei der Extraktion nicht in Lösung gehen) und (einige) Modifizierungs-mittel für Bindemittel beeinflussen das Prüfergebnis.
Mélanges bitumineux - Méthode d'essai - Partie 2: Granulométrie
La présente Norme européenne spécifie un mode opératoire pour la détermination de la composition granulométrique des granulats dans les mélanges bitumineux, par tamisage. L'essai s'applique aux granulats récupérés après extraction du liant selon l'EN 12697-1 ou l'EN 12697-39.
L'applicabilité de la présente Norme européenne est décrite dans les normes de produits relatives aux mélanges bitumineux.
NOTE Les fibres, additifs solides (non solubles durant l'extraction) et (certains) modificateurs de liants influencent le résultat de l'essai.
Bitumenske zmesi - Preskusne metode - 2. del: Ugotavljanje zrnavosti
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumenske zmesi - Preskusne metode - 2. del: Ugotavljanje zrnavostiAsphalt - Prüfverfahren - Teil 2: KorngrößenverteilungMélanges bitumineux - Méthode d'essai - Partie 2: GranulométrieBituminous mixtures - Test method - Part 2: Determination of particle size distribution93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12697-2:2015SIST EN 12697-2:2015en,fr,de01-julij-2015SIST EN 12697-2:2015SLOVENSKI
STANDARDSIST EN 12697-2:2004+A1:20071DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12697-2
April 2015 ICS 93.080.20 Supersedes EN 12697-2:2002+A1:2007English Version
Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
Mélanges bitumineux - Méthode d'essai - Partie 2: Granulométrie
Asphalt - Prüfverfahren - Teil 2: Korngrößenverteilung This European Standard was approved by CEN on 19 March 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12697-2:2015 ESIST EN 12697-2:2015
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.