FprEN 679
(Main)Determination of the compressive strength of autoclaved aerated concrete
- Abstract
This document specifies the procedure for the determination of the compressive strength of autoclaved aerated concrete.
- Status
- Not Published
- Publication Date
- 10-Feb-2027
- Technical Committee
- CEN/TC 177 - Prefabricated reinforced components of autoclaved aerated concrete or light-weight aggregate concret
- Drafting Committee
- CEN/TC 177/WG 3 - Test methods
- Current Stage
- 4599 - Dispatch of FV draft to CMC - Finalization for Vote
- Start Date
- 13-Oct-2026
- Due Date
- 23-Dec-2026
- Completion Date
- 13-Oct-2026
FprEN 679 is a draft European Standard from CEN for determining the compressive strength of autoclaved aerated concrete (AAC). It specifies how AAC test specimens are selected, conditioned, loaded and reported so the strength result is comparable between laboratories and products.
What does FprEN 679 specify?
FprEN 679 specifies the procedure for determining the compressive strength of autoclaved aerated concrete. It is written for testing AAC specimens taken from prefabricated components and for producing a reported product strength from a set of test pieces.
The document is organized into clauses 1 to 9:
- Clause 1 - Scope
- Clause 2 - Normative references
- Clause 3 - Terms and definitions
- Clause 4 - Principle
- Clause 5 - Test apparatus
- Clause 6 - Test specimens
- Clause 7 - Testing procedure
- Clause 8 - Test results
- Clause 9 - Test report
Clause 6 covers sampling, specimen shape and size, the number of specimens, preparation, measurement, volume determination and conditioning. Clause 9 sets out the information that has to be recorded in the test report, which matters when the result is used for product assessment or quality control.
What are the key requirements of FprEN 679?
Clause 4 defines compressive strength as the rupture load in axial compression divided by the specimen area perpendicular to the load. In practice, the test result depends on accurate load measurement and correct area determination, so specimen dimensions matter directly.
Clause 5 requires a compression testing machine meeting EN 12390-4, machine class 1 or 2, together with cutting equipment, calipers, ovens, a straight edge, gauges and a balance. This means the laboratory needs equipment that can measure dimensions, moisture condition and failure load with the stated accuracy.
Clause 6.1 requires the sample to be representative of the product under investigation. Specimens may be prepared from prefabricated reinforced components or taken from prefabricated unreinforced components of the same mould, so the sampling plan has to reflect the product form being checked.
Clause 6.2 specifies 100 mm cubes as the standard test specimen. Other shapes or sizes are allowed only if their compressive strength can be directly related to 100 mm cubes, which keeps the result tied to the reference specimen format.
Clause 6.3 requires a test set of three specimens, preferably taken from the upper third, middle and lower third of the component in the direction of rise. The rise direction must be marked, because the position in the component can influence strength.
Clause 6.4 requires the cut faces to be plane, clean and free from reinforcement, with tight limits on flatness and squareness. In practice, this reduces test bias caused by uneven loading or damaged edges.
Clause 6.6 gives two conditioning routes. The reference regime is conditioning to (6 ± 2) % by mass moisture content, while the alternative is oven drying at (70 ± 5) °C to constant mass. This matters because moisture condition changes measured strength, so the laboratory must record which route was used.
Clause 7.1 requires axial loading perpendicular to the rise direction and a controlled loading rate until rupture. Clause 8 then calculates individual specimen strength from maximum load and loaded area, and the product strength as the mean of the three specimens. If oven-drying was used, the mean result is adjusted with a factor of 0.8 to align it with the reference conditioning regime.
What changed in FprEN 679 from the previous edition?
FprEN 679 will supersede EN 679:2005. The draft states two significant technical changes: it adds the procedure for conditioning specimens by drying to constant mass at (70 ± 5) °C before testing, and it reflects the need for standardized test methods to meet the performance requirements in the product standard for prefabricated components of autoclaved aerated concrete.
Which standards are used with FprEN 679?
FprEN 679 cites three normative references:
- EN 678 - used for determining dry density of AAC, including the dry density check for companion specimens and post-test density determination.
- EN 1353 - used for determining moisture content of AAC after testing when the reference conditioning regime is used.
- EN 12390-4 - used for the specification of the compression testing machine and its class.
What does the FprEN 679 document contain?
FprEN 679 contains the full test sequence from specimen selection to reporting. It includes the sampling scheme shown in Figure 1, the specimen preparation method, dimensional measurement and volume calculation, two conditioning procedures, and the compression test setup and loading rate.
It also includes the calculation method for individual specimen strength and the mean product strength, plus the adjustment applied after oven-dry conditioning. Clause 9 gives the reporting items, including product identification, specimen geometry and position, conditioning method, moisture and density results where relevant, compressive strengths and visual observations on the specimens.
Relations
- Effective Date
- 09-Jul-2025
Get Certified
Connect with accredited certification bodies for this standard

DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.

Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
FprEN 679 is a draft published by the European Committee for Standardization (CEN). Its full title is "Determination of the compressive strength of autoclaved aerated concrete". This standard covers: This document specifies the procedure for the determination of the compressive strength of autoclaved aerated concrete.
This document specifies the procedure for the determination of the compressive strength of autoclaved aerated concrete.
FprEN 679 is classified under the following ICS (International Classification for Standards) categories: 91.100.30 - Concrete and concrete products. The ICS classification helps identify the subject area and facilitates finding related standards.
FprEN 679 has the following relationships with other standards: It is inter standard links to EN 679:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
FprEN 679 is associated with the following European legislation: Standardization Mandates: M/100. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
FprEN 679 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2026
Ugotavljanje tlačne trdnosti avtoklaviranega celičastega betona
Determination of the compressive strength of autoclaved aerated concrete
Bestimmung der Druckfestigkeit von dampfgehärtetem Porenbeton
Détermination de la résistance à la compression du béton cellulaire autoclavé
Ta slovenski standard je istoveten z: prEN 679
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
prEN 679
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2026
ICS 91.100.30 Will supersede EN 679:2005
English Version
Determination of the compressive strength of autoclaved
aerated concrete
Détermination de la résistance à la compression du Bestimmung der Druckfestigkeit von dampfgehärtetem
béton cellulaire autoclavé Porenbeton
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 177.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 679:2026 E
worldwide for CEN national Members.
prEN 679:2026 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Test apparatus . 4
6 Test specimens . 4
6.1 Sample . 4
6.2 Shape and size of test specimens . 5
6.3 Number of specimens . 5
6.4 Preparation of test specimens . 5
6.5 Measurement of test specimens and determination of their volume . 5
6.6 Conditioning of the test specimens . 6
6.6.1 General. 6
6.6.2 Procedure a) Conditioning to (6 ± 2) % by mass moisture content . 6
6.6.3 Procedure b) Conditioning to the oven dry condition (70 ± 5) °C . 6
7 Testing procedure . 7
7.1 Compression test . 7
7.2 Determination of actual moisture content and dry density of test specimens . 7
8 Test results . 7
9 Test report . 8
prEN 679:2026 (E)
European foreword
This document (prEN 679:2026) has been prepared by Technical Committee CEN/TC 177 “Prefabricated
reinforced components of autoclaved aerated concrete or light-weight aggregate concrete with open
structure”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 679:2005.
This document includes the following significant technical changes with respect to EN 679:2005:
— incorporation of procedure for additional conditioning [drying to constant mass at temperature of
(70 ± 5) °C of specimens before testing as stated in the test standard for masonry units
(EN 772-1:2016, 7.3.3 b))];
— in order to meet the performance requirements as laid down in the product standard for
prefabricated components of autoclaved aerated concrete, a number of standardized test methods
are necessary.
prEN 679:2026 (E)
1 Scope
This document specifies the procedure for the determination of the compressive strength of autoclaved
aerated concrete.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 678, Determination of the dry density of autoclaved aerated concrete
EN 1353, Determination of moisture content of autoclaved aerated concrete
EN 12390-4, Testing hardened concrete — Part 4: Compressive strength — Specification for testing
machines
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at https://www.electropedia.org/
4 Principle
The compressive strength is determined on test specimens as the ratio between the rupture load in axial
compression and the cross-sectional area of the test specimen perpendicular to the loading direction.
5 Test apparatus
a) Saw for cutting test specimens;
b) compression testing machine, which meets the requirements of EN 12390-4, machine class 1 or 2;
c) calipers, capable of reading the dimensions of the test specimens to an accuracy of 0,1 mm;
d) ventilated drying ovens, capable of maintaining required temperatures for conditioning and drying
test specimens: (≤60 °C), (70 ± 5) °C and (105 ± 5) °C;
e) straight edge, at least 200 mm long, a 0,1 mm-feeler gauge, a 1 mm-feeler gauge, and a square;
f) balance, capable of determining the mass of the test specimens to an accuracy of 0,1 %.
6 Test specimens
6.1 Sa
...



