EN 1736:2000
(Main)Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation
Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation
This European Standard describes requirements, design and installation of flexible pipe elements (e.g. metallic flexible pipe, metallic flexible tube, non-metallic flexible tube, expansion joint) used in the refrigerant circuits of refrigerating systems and heat pumps. It does not apply to flexible pipes that are only occasionally stressed beyond the elastic limit, e.g. during repair work, or to joints which are free to rotate or hinge.
Kälteanlagen und Wärmepumpen - Flexible Rohrleitungsteile, Schwingungsabsorber und Kompensatoren - Anforderungen, Konstruktion und Einbau
Diese Europäische Norm gilt für flexible Rohrleitungsteile (z.B. biegsames Metall-Rohr, Metall-Schlauch, Nichtmetall-Schlauch, Schwingungsabsorber, Kom- pensator) in Kältemittelkreisläufen von Kälteanlagen und Wärmepumpen. Sie gilt nicht für biegsame Rohre, die nur gelegentlich über ihre Elastizitäts- grenze hinaus beansprucht werden, z.B. bei Reparaturen, oder für drehbar gelagerte Verbindungen oder Rohrgelenke.
Systèmes de réfrigération et pompes à chaleur - Eléments flexibles de tuyauterie, isolateurs de vibration et joints de dilatation - Exigences, conception et installation
La présente norme européenne décrit les exigences, la conception et l'installation des éléments flexibles de tuyauteries (par exemple tuyauterie flexible métallique, tuyau flexible métallique, tuyau flexible non métallique, joint d'expansion) utilisés dans les circuits de fluides frigorigènes des systèmes de réfrigération et pompes à chaleur. Elle ne s'applique pas aux tuyauteries flexibles qui ne subissent qu'occasionnellement des contraintes au-delà de la limite d'élasticité, comme par exemple, lors de travaux de réparation, ou aux raccords qui tournent ou pivotent librement.
Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation
General Information
- Status
- Withdrawn
- Publication Date
- 18-Jan-2000
- Withdrawal Date
- 11-Nov-2008
- Technical Committee
- CEN/TC 182 - Refrigerating systems, safety and environmental requirements
- Drafting Committee
- CEN/TC 182/WG 2 - Design and testing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 12-Nov-2008
- Completion Date
- 12-Nov-2008
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
DNV
DNV is an independent assurance and risk management provider.
Lloyd's Register
Lloyd's Register is a global professional services organisation specialising in engineering and technology.
DNV Energy Systems
Energy and renewable energy certification.
Sponsored listings
Frequently Asked Questions
EN 1736:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation". This standard covers: This European Standard describes requirements, design and installation of flexible pipe elements (e.g. metallic flexible pipe, metallic flexible tube, non-metallic flexible tube, expansion joint) used in the refrigerant circuits of refrigerating systems and heat pumps. It does not apply to flexible pipes that are only occasionally stressed beyond the elastic limit, e.g. during repair work, or to joints which are free to rotate or hinge.
This European Standard describes requirements, design and installation of flexible pipe elements (e.g. metallic flexible pipe, metallic flexible tube, non-metallic flexible tube, expansion joint) used in the refrigerant circuits of refrigerating systems and heat pumps. It does not apply to flexible pipes that are only occasionally stressed beyond the elastic limit, e.g. during repair work, or to joints which are free to rotate or hinge.
EN 1736:2000 is classified under the following ICS (International Classification for Standards) categories: 27.080 - Heat pumps; 27.200 - Refrigerating technology. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1736:2000 has the following relationships with other standards: It is inter standard links to EN 1736:2008, EN 378-2:2008+A2:2012. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1736:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installationKälteanlagen und Wärmepumpen - Flexible Rohrleitungsteile, Schwingungsabsorber und Kompensatoren - Anforderungen, Konstruktion und EinbauSystemes de réfrigération et pompes a chaleur - Eléments flexibles de tuyauterie, isolateurs de vibration et joints de dilatation - Exigences, conception et installationRefrigerating systems and heat pum
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...