Chimneys - Clay/Ceramic Flue Liners - Requirements and test methods

This European standard is a product standard for clay/ceramic flue liners with solid walls or walls with vertical perforations for use in the construction of chimneys and flue pipes which serve to convey products of combustion from fireplaces or heating appliances to the atmosphere by negative or positive pressure. It includes the flue liners used for domestic and industrial chimneys which are not structurally independent (free-standing). This standard specifies the performance requirements for factory made flue liners and chimney fittings. Testing, marking and inspection are covered by this standard.

Abgasanlagen - Keramik-Innenrohre - Anforderungen und Prüfungen

Diese Europäische Norm ist eine Produktnorm für Keramik-Innenrohre mit massiven oder vertikal gelochten Wandungen zur Verwendung in Schornsteinen und Abgasleitungen, die dazu dienen, Verbrennungsprodukte von Feuer-stätten an die Außenluft durch Über- oder Unterdruck abzuleiten. Diese Norm beinhaltet Innenrohre für Abgasanlagen und Industrieschornsteine, die nicht freistehend sind. Diese Norm enthält Festlegungen der Leistungsanforderungen an werkmäßig hergestellte Innenrohre und Formstücke. Sie enthält ferner die Anforderungen an die Prüfung, Kennzeichnung und Qualitätskontrolle.

Conduits de fumée - Conduits intérieurs en terre cuite/céramique - Exigences et méthodes d'essai

La présente norme européenne est une norme produit relatives aux conduits intérieurs en terre cuite/céramique munis de parois pleines ou de parois à alvéoles verticales utilisés dans la construction des conduits de fumée et des conduits de raccordement destinés à évacuer dans l'atmosphère, sous une pression négative ou positive, les produits de combustion produits par les cheminées ou les générateurs de chaleur. La présente norme européenne comprend les conduits intérieurs à usage domestique et les conduits de fumée industriels qui ne sont pas structurellement indépendants (autostables).

Dimniki – Keramične tuljave – Zahteve in preskusne metode

General Information

Status
Withdrawn
Publication Date
19-Jan-1999
Withdrawal Date
24-Jan-2012
Technical Committee
CEN/TC 166 - Chimneys
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
25-Jan-2012
Completion Date
25-Jan-2012

Relations

Effective Date
08-Jun-2022
Effective Date
08-Jun-2022
Effective Date
28-Jan-2026
Effective Date
28-Jan-2026
Effective Date
28-Jan-2026
Effective Date
08-Jun-2022
Effective Date
08-Jun-2022
Effective Date
08-Jun-2022

Get Certified

Connect with accredited certification bodies for this standard

ICC Evaluation Service

Nonprofit organization that performs technical evaluations of building products.

ANAB United States Verified

Aboma Certification B.V.

Specialized in construction, metal, and transport sectors.

RVA Netherlands Verified

BBA (British Board of Agrément)

UK construction product certification.

UKAS United Kingdom Verified

Sponsored listings

Frequently Asked Questions

EN 1457:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Chimneys - Clay/Ceramic Flue Liners - Requirements and test methods". This standard covers: This European standard is a product standard for clay/ceramic flue liners with solid walls or walls with vertical perforations for use in the construction of chimneys and flue pipes which serve to convey products of combustion from fireplaces or heating appliances to the atmosphere by negative or positive pressure. It includes the flue liners used for domestic and industrial chimneys which are not structurally independent (free-standing). This standard specifies the performance requirements for factory made flue liners and chimney fittings. Testing, marking and inspection are covered by this standard.

This European standard is a product standard for clay/ceramic flue liners with solid walls or walls with vertical perforations for use in the construction of chimneys and flue pipes which serve to convey products of combustion from fireplaces or heating appliances to the atmosphere by negative or positive pressure. It includes the flue liners used for domestic and industrial chimneys which are not structurally independent (free-standing). This standard specifies the performance requirements for factory made flue liners and chimney fittings. Testing, marking and inspection are covered by this standard.

EN 1457:1999 is classified under the following ICS (International Classification for Standards) categories: 91.060.40 - Chimneys, shafts, ducts. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 1457:1999 has the following relationships with other standards: It is inter standard links to EN 1457-2:2012, EN 1457-1:2012, EN 13063-2:2005+A1:2007, EN 13063-1:2005+A1:2007, EN 13063-3:2007, EN 1457:1999/A1:2002, EN 1457:1999/AC:1999, EN 1457:1999/AC:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 1457:1999 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/105. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 1457:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-1999
'LPQLNL±.HUDPLþQHWXOMDYH±=DKWHYHLQSUHVNXVQHPHWRGH
Chimneys - Clay/Ceramic Flue Liners - Requirements and test methods
Abgasanlagen - Keramik-Innenrohre - Anforderungen und Prüfungen
Conduits de fumée - Conduits intérieurs en terre cuite/céramique - Exigences
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...