Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery

This document specifies the technical conditions for inspection and delivery of aluminium and aluminium alloy drawn wire for general engineering applications.
It does not apply for aeronautical application.
It applies to drawn wires, except for electrical or welding purposes.
It does not apply to drawing stock.

Aluminium und Aluminiumlegierungen - Gezogene Drähte - Teil 1: Technische Lieferbedingungen

Dieses Dokument legt die Technischen Lieferbedingungen für gezogene Drähte aus Aluminium und Aluminiumlegierungen für allgemeine Anwendungen fest.
Es gilt nicht für Anwendungen in der Luftfahrt.
Es gilt für gezogene Drähte, ausgenommen Drähte für elektrotechnische oder schweißtechnische Anwendungen.
Es gilt nicht für Vordraht.

Aluminium et alliages d'aluminium - Fil étiré - Partie 1 : Conditions techniques de contrôle et de livraison

Ce document spécifie les conditions techniques de contrôle et de livraison du fil étiré en aluminium ou en alliage d'aluminium destiné à des applications mécaniques générales.
Il ne s'applique pas aux applications aéronautiques.
Il s’applique aux fils étirés, à l’exception des fils électriques et de soudage.
Il ne s’applique pas aux fils machine.

Aluminij in aluminijeve zlitine - Vlečena žica - 1. del: Tehnični pogoji za prevzem in dobavo

General Information

Status
Published
Publication Date
16-Sep-2008
Current Stage
9020 - Submission to 2 Year Review Enquiry - Review Enquiry
Start Date
15-Jul-2024
Completion Date
15-Jul-2024

Relations

Buy Standard

Standard
EN 1301-1:2008
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.GREDYRAluminium und Aluminiumlegierungen - Gezogene Drähte - Teil 1: Technische LieferbedingungenAluminium et alliages d'aluminium - Fil étiré - Partie 1: Conditions techniques de contrôle et de livraisonAluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery77.150.10Aluminijski izdelkiAluminium productsICS:Ta slovenski standard je istoveten z:EN 1301-1:2008SIST EN 1301-1:2008en,fr,de01-november-2008SIST EN 1301-1:2008SLOVENSKI
STANDARDSIST EN 1301-1:19981DGRPHãþD

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1301-1September 2008ICS 77.150.10Supersedes EN 1301-1:1997
English VersionAluminium and aluminium alloys - Drawn wire - Part 1: Technicalconditions for inspection and deliveryAluminium et alliages d'aluminium - Fil étiré - Partie 1 :Conditions techniques de contrôle et de livraisonAluminium und Aluminiumlegierungen - Gezogene Drähte -Teil 1: Technische LieferbedingungenThis European Standard was approved by CEN on 16 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1301-1:2008: ESIST EN 1301-1:2008

 Foreword : amended;  Clause 2: EN 12258-1:1998 and EN 14361 added;  Clause 3: subclauses 3.1 to 3.9 deleted and replaced by reference to EN 12258-1:1998;  Clause 6: subclauses 6.1.2 and 6.1.3 modified;  Clause 7: completely revised. EN 1301 comprises the following parts under the general title: "Aluminium and aluminium alloys – Drawn wire":  Part 1: Technical conditions for inspection and delivery  Part 2 : Mechanical properties  Part 3 : Tolerances on dimensions According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.