EN 13592:2003

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Plastics sacks for household waste collection - Types, requirements and test methodsSacs en plastique pour la collecte des déchets ménagers - Types, exigences et méthodes d'essaiKunststoffsäcke für die Abfallsammlung aus Haushalten - Typen, Anforderungen und PrüfverfahrenTa slovenski standard je istoveten z:EN 13592:2003SIST EN 13592:2003en55.080Sacks. Bags13.030.40Naprave in oprema za odstranjevanje in obdelavo odpadkovInstallations and equipment for waste disposal and treatmentICS:SLOVENSKI
STANDARDSIST EN 13592:200301-julij-2003

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13592March 2003ICS 13.030.40; 55.080English versionPlastics sacks for household waste collection - Types,requirements and test methodsSacs en plastique pour la collecte des déchets ménagers -Types, exigences et méthodes d'essaiKunststoffsäcke für die Abfallsammlung aus Haushalten -Typen, Anforderungen und PrüfverfahrenThis European Standard was approved by CEN on 6 December 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13592:2003 E

Types of sacks.20Annex B (normative)
Sampling.21

- EN 13592 - 600/800 - Drawtight - PE - Neutral - 30 µm “Other information could be added under agreement between supplier and buyer.5 DimensionsThe dimensions of the sack shall be agreed between supplier and buyer.The different dimensions of sacks are given by two separate numbers in millimetres, the first specifying the usefulwidth (see 3.10 and 9.1.3) and the second the useful length of the sack (see 3.9 and 9.1.2). Table 1 givesexamples of sack dimensions.

X = tt
25 15NN+rounded to the nearest upper or lower unit (mm) (1,4 as 1 mm; 1,5 as 2 mm; 1,6 as 2mm)6.2.3 Average valueThe arithmetic average value of the measurements made in accordance with 9.1.4 shall be:a)greater than Nt – 5 %, when Nt is greater than 20 micrometres.b)greater than Nt – 8 %, when Nt is less or equal to 20 micrometres.
...