EN ISO 14889:1997
(Main)Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses (ISO 14889:1997)
Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses (ISO 14889:1997)
This International Standard specifies essential requirements for uncut spectacle lenses. This International Standard is not applicable to protective lenses. This International Standard takes precedence over the corresponding requirements of other standards, if differences exist.
Augenoptik - Brillengläser - Grundlegende Anforderungen an rohkantige fertige Brillengläser (ISO 14889:1997)
Diese Internationale Norm legt die grundlegenden Anforderungen an rohkantige fertige Brillengläser fest. Diese Internationale Norm gilt nicht für Schutzgläser. Diese Internationale Norm hat Vorrang gegenüber den entsprechenden Anforderungen anderer Normen, sofern Unterschiede bestehen.
Optique ophtalmique - Verres de lunettes - Exigences fondamentales relatives aux verres finis non détourés (ISO 14889:1997)
L'IEC 80001-1:2021 spécifie des exigences générales au profit des ORGANISATIONS pour l’application de la GESTION DES RISQUES avant, pendant et après la connexion d’un SYSTEME TI DE SANTE au sein d’une INFRASTRUCTURE TI DE SANTE. Il traite des PROPRIETES CLES de SECURITE, d’EFFICACITE et de SURETE tout en impliquant les intervenants concernés.
L'IEC 80001-1:2021 annule et remplace la première édition parue en 2010. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) modification de la structure pour mieux s’aligner sur l’ISO 31000;
b) établissement d’exigences en faveur d’une ORGANISATION dans l’application de la GESTION DES RISQUES;
c) communication de la valeur, de l’objectif et de la finalité de la GESTION DES RISQUES à travers des principes qui favorisent la préservation des PROPRIETES CLES lors de la mise en œuvre et de l’utilisation des LOGICIELS DE SANTE et/ou SYSTEMES TI DE SANTE connectés.
Očesna optika - Stekla očal - Temeljne zahteve za nebrušena gotova stekla (ISO 14889:1997)
General Information
- Status
- Withdrawn
- Publication Date
- 31-Jul-1997
- Withdrawal Date
- 14-May-2003
- Technical Committee
- CEN/TC 170 - Ophthalmic optics
- Drafting Committee
- CEN/TC 170 - Ophthalmic optics
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 15-May-2003
- Completion Date
- 15-May-2003
- Directive
- 93/42/EEC - Medical devices
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
BSI Group
BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.
TÜV Rheinland
TÜV Rheinland is a leading international provider of technical services.
TÜV SÜD
TÜV SÜD is a trusted partner of choice for safety, security and sustainability solutions.
Sponsored listings
Frequently Asked Questions
EN ISO 14889:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses (ISO 14889:1997)". This standard covers: This International Standard specifies essential requirements for uncut spectacle lenses. This International Standard is not applicable to protective lenses. This International Standard takes precedence over the corresponding requirements of other standards, if differences exist.
This International Standard specifies essential requirements for uncut spectacle lenses. This International Standard is not applicable to protective lenses. This International Standard takes precedence over the corresponding requirements of other standards, if differences exist.
EN ISO 14889:1997 is classified under the following ICS (International Classification for Standards) categories: 11.040 - Medical equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 14889:1997 has the following relationships with other standards: It is inter standard links to EN ISO 14889:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 14889:1997 is associated with the following European legislation: EU Directives/Regulations: 93/42/EEC; Standardization Mandates: M/023. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN ISO 14889:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2000
2þHVQDRSWLND6WHNODRþDO7HPHOMQH]DKWHYH]DQHEUXãHQDJRWRYDVWHNOD ,62
Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished
lenses (ISO 14889:1997)
Augenoptik - Brillengläser - Grundlegende Anforderungen an rohkantige fertige
Brillengläser (ISO 14889:1997)
Optique ophtalmique - Verres de lunettes - Exigences fondamentales relatives aux
verres finis non détourés (ISO 14889:1997)
Ta slovenski standard je istoveten z: EN ISO 14889:1997
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
IS0
INTERNATIONAL
STANDARD
First edition
1997-08-01
Ophthalmic optics - Spectacle lenses -
Fundamental requirements for uncut
finished lenses
Optique ophtalmique - Verres de lunettes - Exigences fondamentales
relatives aux verres finis non d&tour&
Reference number
IS0 14889: 1997(E)
IS0 14889:1997(E)
Content
I Scope . . . . . . . . . . . . . . . . . . . . . . . .*. 1
2 Normatives references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .‘.~. 1
3 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
4 General requirements for spectacle lenses . . . . . . . . . . . . . .~.~. 2
4.1 Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
4.2 Design ,.,. 2
43 Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
4:4 Mechanical strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
45 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Transmittance
5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*. 3
Test methods
51 a . . . . . . . . . . . . . . . . . . . . . . . .*.*. 3
Flammability
52 . Mechanical strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .~. 5
6 Information
0 IS0 1997
All rights reserved. Unless otherwise specified, no part of this publication may be
reproduced or utilized in any form or by any means, electronic or mechanical, including
photocopying and microfilm, without permission in writing from the publisher.
lnternational Organization for Standardization
Case postale 56 l CH-1211 Geneve 20 l Switzerland
Internet:
central @ iso.ch
x.400: c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
IS0 14889:1997(E)
@ IS0
Foreword
IS0 (the International Organization for Standardization) is a world-wide federation of national standards
bodies (IS0 member bodies). The work of preparing International Standards is normally carried out
through IS0 technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for
voting. Publication as an International Standard requires approval by at least 75% of the member bodies
casting a vote.
International Standard IS0 14889 was prepared by Technical Committee ISOnC 172, Optics and optica/
instruments, Subcommittee SC 7, Ophthalmic optics and instruments.
This page intentionally left blank
INTERNATIONAL STANDARD @ IS0
IS0 14889: 1997(E)
Ophthalmic optics - Spectacle lenses - Fundamental requirements
for uncut finished lenses
1 Scope
This International Standard specifies essential requirements for uncut finished spectacle lenses. This
International Standard is not applicable to protective lenses.
This International Standard takes precedence over the corresponding requirements of other
standards, if differences exist.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute
provisions of this International Standard. At the time of the publication, the editions indicated were
valid. All standards are subject to revision, and parties to agreements based on the International
Standard are encouraged to investigate the possibility of applying the most recent editions of the
standards indicated below. Members of IEC and IS0 maintain registers of currently valid International
Standards.
IS0 8980~1:1996, Ophthalmic optics - Uncut finished spectacle lenses - Part 7 : Specifications for
single-vision and multifocal lenses
Uncut finished spectacle lenses - Part 2 : Specifications for
IS0 8980-2:1996, Ophthalmic optics -
progressive power lenses
Ophthalmic optics - Uncut finished spectacle lenses - Part 3 : Transmittance
IS0 8980-3:-l,
specifications and test methods
IS0 13666: -I, Ophthalmic optics - Spectacle lenses - Vocabulary
3 Definitions
For the purposes of this International Standard, the definitions given in IS0 13666 and the following
definition apply :
3.1 manufacturer (of an uncut finished spectacle lens)
Natural or legal person who pl
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...