EN 1366-13:2019
(Main)Fire resistance tests for service installations - Part 13: Chimneys
Fire resistance tests for service installations - Part 13: Chimneys
Fire resistance tests for service installations - Part xx: Chimneys
Feuerwiderstandsprüfungen für Installationen - Teil 13: Abgasanlagen
Dieses Dokument legt ein Verfahren zur Bestimmung der Feuerwiderstandsdauer für Abgasanlagen (siehe Normative Verweisungen), Schächte von Abgasanlagen oder Durchführungselemente als Teil einer Abgasanlage unter standardisierten Brandbedingungen fest. Die Prüfung untersucht das Verhalten von Abgasanlagen, die einem Brand nur von außen oder einem Brand, der von außen in das Innere der Abgasanlage eindringt, ausgesetzt sind. Diese Norm gilt zusammen mit EN 1363 1. Luftschächte für Verbrennungsluft in Abgasanlagen können ebenfalls eingeschlossen werden. Die Norm gilt auch für diese Abgasanlagen. Geneigte Abgasanlagen werden nicht behandelt.
Anhang A liefert allgemeine Anleitungen und Hintergrundinformationen. Dieses Dokument gilt nicht für:
— Widerstand gegen Rußbrände;
— Zubehörteile, es sei denn, sie sind in die zu prüfende System-Abgasanlage eingebunden;
— ein-, zwei- oder dreiseitige Ummantelungen.
Wenn der Druck im Inneren der Abgasanlage in der Praxis auf Werte unter –40 Pa absinken oder auf Werte über +5 000 Pa ansteigen kann, muss bedacht werden, dass dies nicht über die in dieser Norm beschriebene Prüfung abgedeckt werden kann.
Essais de résistance au feu des installations techniques - Partie 13 : Conduits de fumée
Preskusi požarne odpornosti servisnih inštalacij - 13. del: Dimovodne naprave
Ta dokument določa postopke za določanje časa požarne odpornosti dimovodnih konstrukcij (glej zveze s standardi), dimovodnih jaškov ali penetracijskih elementov kot dela dimovodnih konstrukcij v okviru standardiziranih požarnih razmer. Preskus preverja vedenje dimovodnih izdelkov, pri katerih je ognju izpostavljena le zunanjost ali pa ogenj prehaja v dimovodne naprave od zunaj. Ta standard se uporablja v povezavi s standardom EN 1363-1. Med dimovodne naprave se lahko vključi tudi cevi za dovod zraka za izgorevanje.
Ta standard se uporablja tudi za tovrstne dimovodne naprave. Poševne dimovodne naprave niso vključene.
Dodatek A podaja splošne smernice in dodatne informacije. Ta dokument se ne uporablja za:
– pogoje odpornosti proti požaru saj;
– dodatke, razen če so del dimovodnega sistema, ki se preskuša;
– eno-, dvo- ali tristranska ogrodja.
Če se lahko tlak znotraj dimovodne naprave v praksi spusti na vrednosti nižje od 40 Pa ali doseže vrednosti višje od +5000 Pa, potem to ne more biti zajeto v preskusu, ki ga ta standard predpisuje.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2019
Preskusi požarne odpornosti servisnih inštalacij - 13. del: Dimovodne naprave
Fire resistance tests for service installations - Part 13: Chimneys
Feuerwiderstandsprüfungen für Installationen - Teil 13: Abgasanlagen
Essais de résistance au feu des installations techniques - Partie 13 : Conduits de fumée
Ta slovenski standard je istoveten z: EN 1366-13:2019
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.060.40 Dimniki, jaški, kanali Chimneys, shafts, ducts
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 1366-13
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2019
EUROPÄISCHE NORM
ICS 13.220.50; 91.060.40
English Version
Fire resistance tests for service installations - Part 13:
Chimneys
Essais de résistance au feu des installations techniques Feuerwiderstandsprüfungen für Installationen - Teil
- Partie 13 : Conduits de fumée 13: Abgasanlagen
This European Standard was approved by CEN on 6 January 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1366-13:2019 E
worldwide for CEN national Members.
Contents
European foreword . 5
Introduction . 6
1 Scope . 7
2Normative references . 7
3Terms and definitions . 8
4Test equipment. 9
4.1 General . 9
4.2 Furnace . 9
4.3 Equipment for measuring gas pressure . 9
4.4 Equipment for measuring thermal movements . 9
5Test conditions . 9
6Test specimen . 10
6.1 Size . 10
6.1.1 General. 10
6.1.2 Length . 10
6.1.3 Cross-section . 10
6.2 Number . 10
6.3 Design . 10
6.3.1 General. 10
6.3.2 Distances to the test furnace and between each other . 11
6.3.3 Openings in test specimen . 11
6.3.4 Joints in horizontal test specimens including connecting flue pipes . 11
6.3.5 Joints in vertical test specimen . 12
6.3.6 Support for vertical chimneys . 12
6.3.7 Support for horizontal test specimen . 12
6.3.8 Compensators . 12
7Installation of test specimen . 12
7.1 General . 12
7.2 Standard supporting construction . 13
7.3 Non-standard supporting constructions . 13
7.4 Restraint of test specimen . 13
7.4.1 Inside the furnace . 13
7.4.2 At the penetration point . 13
7.4.3 Fire stopping . 13
7.4.4 Unsupported vertical chimneys . 13
8Conditioning . 13
8.1 General . 13
8.2 Water-based sealing materials . 13
9Application of instrumentation . 14
9.1 Thermocouples . 14
9.1.1 Furnace thermocouples (plate thermometers) . 14
9.1.2 Unexposed surface thermocouples. 14
9.2 Pressure . 15
9.3 Expansion/contraction . 15
10Test procedure . 15
10.1 Thermal treatment before the fire resistance test . 15
10.2 Fire resistance test . 15
10.2.1 General. 15
10.2.2 Temperature . 16
10.2.3 Pressure . 16
10.2.4 Test measurements and observations . 16
10.2.5 Termination of the test . 16
11Performance criteria . 16
11.1 Integrity . 16
11.2 Insulation . 17
12Test report . 17
13Field of direct application of test results. 17
13.1 Distance - Horizontal parts of test specimen . 17
13.2 Sizes . 17
13.2.1 Diameter or cross section . 17
13.2.2 Length of horizontal chimneys . 18
13.2.3 Height of vertical Chimneys - Chimneys supported at each storey . 18
13.3 Pressure . 18
13.4 Construction . 18
13.5 Supporting construction. 18
13.6 Fire stopping . 18
Annex A (informative) General guidance . 24
A.1General . 24
A.2Notes on test specimens . 24
A.2.1Design . 24
A.2.2Thermal expansion / contraction . 24
A.2.2.1General . 24
A.2.2.2Effect on supporting constructions . 24
A.2.2.3Effect on joints, attachments, etc . 24
A.3Notes on test conditions - Temperature-time development . 24
A.4Notes on procedure - Using additional thermocouples T1 . 25
Bibliography . 26
European foreword
This document (EN 1366-13:2019) has been prepared by Technical Committee CEN/TC 127 “Fire
safety in buildings”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2019, and conflicting national standards
shall be withdrawn at the latest by October 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CE
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.