EN 1863-1:2011
(Main)Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description
Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description
This European Standard specifies tolerances, flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat heat strengthened soda lime silicate glass of nominal thicknesses from 3 mm to 12 mm for use in buildings.
Information on curved heat strengthened soda lime silicate glass is given in Annex A, but this product does not form part of this standard.
Other requirements, not specified in this standard, can apply to heat strengthened soda lime silicate glass which is incorporated into assemblies, e.g. laminated glass or insulating glass units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate product standard. Heat strengthened soda lime silicate glass, in this case, does not lose its mechanical or thermal characteristics.
This European Standard does not cover glass sandblasted after toughening.
Glas im Bauwesen - Teilvorgespanntes Kalknatronglas - Teil 1: Definition und Beschreibung
Diese Europäische Norm legt Toleranzen, Geradheit, Kantenbearbeitung, Bruchverhalten sowie physikalische und mechanische Eigenschaften von einscheibigem, flachem, teilvorgespanntem Glas mit Nenndicken von 3 mm bis 12 mm für den Gebrauch im Bauwesen fest.
An teilvorgespanntes Kalknatronglas können andere Anforderungen, die in dieser Norm nicht beschrieben sind, gestellt werden, wenn sie Bestandteil sind von Kombinationen wie z. B. Verbundglas, Isolierglas oder wenn sie weiterverarbeitet werden, z. B. beschichtet. Die zusätzlichen Anforderungen sind in den entsprechenden Normen der Fertigprodukte festgelegt. In diesem Fall wird teilvorgespanntes Kalknatronglas seine mechanischen und/oder thermischen Eigenschaften nicht verlieren.
Diese Europäische Norm behandelt kein im Anschluss an das Teilvorspannen sandgestrahltes Glas.
Verre dans la construction - Verre de silicate sodo-calcique durci thermiquement - Partie 1: Définition et description
La présente Norme européenne spécifie les tolérances, la planéité, la finition des chants, la fragmentation et les caractéristiques physiques et mécaniques du verre de silicate sodo-calcique plat monolithique durci thermiquement, d’une épaisseur nominale de 3 mm à 12 mm, destiné à être utilisé dans la construction.
D’autres exigences, non spécifiées dans la présente norme, sont susceptibles de s’appliquer au verre de silicate sodo-calcique durci thermiquement intégré dans des ensembles, par exemple des ensembles en verre feuilleté ou des vitrages isolants, ou de subir un traitement supplémentaire, par exemple un revêtement. Les exigences supplémentaires sont spécifiées dans la norme de produit correspondante. Dans ce cas, le verre de silicate sodo-calcique durci thermiquement ne perd pas ses caractéristiques mécaniques ou thermiques.
La présente Norme européenne ne traite pas du verre sablé après trempe.
Steklo v gradbeništvu - Delno kaljeno natrij-kalcijevo silikatno steklo - 1. del: Definicija in opis
Ta evropski standard določa toleranco, ploskost, obdelavo robov, drobljenje ter fizične in mehanske lastnosti monolitnega ploskega delno kaljenega natrij-kalcijevega silikatnega stekla nominalne debeline od 3 mm do 12 mm, ki se uporablja v gradbeništvu. Informacije o ukrivljenem delno kaljenem natrij-kalcijevem steklu so podane v dodatku A, vendar ta izdelek ni del tega standarda. Druge zahteve, ki niso določene v tem standardu, se lahko uporabljajo za delno kaljeno natrij-kalcijevo silikatno steklo, ki je vgrajeno v sestave, npr. lepljeno steklo ali izolacijsko steklo, ali pa ga je treba dodatno obdelati, npr. z nanosi. Dodatne zahteve so določene v ustreznem standardu za izdelek. Delno kaljeno natrij-kalcijevo silikatno steklo v tem primeru ne izgubi mehanskih ali toplotnih lastnosti.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steklo v gradbeništvu - Delno kaljeno natrij-kalcijevo silikatno steklo - 1. del: Definicija in opisGlas im Bauwesen - Teilvorgespanntes Kalknatronglas - Teil 1: Definition und BeschreibungVerre dans la construction - Verre de silicate sodo-calcique durci thermiquement - Partie 1: Définition et descriptionGlass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description81.040.20Steklo v gradbeništvuGlass in buildingICS:Ta slovenski standard je istoveten z:EN 1863-1:2011SIST EN 1863-1:2012en,fr,de01-marec-2012SIST EN 1863-1:2012SLOVENSKI
STANDARDSIST EN 1863-1:20001DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1863-1
November 2011 ICS 81.040.20 Supersedes EN 1863-1:2000English Version
Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description
Verre dans la construction - Verre de silicate sodo-calcique durci thermiquement - Partie 1: Définition et description
Glas im Bauwesen - Teilvorgespanntes Kalknatronglas - Teil 1: Definition und Beschreibung This European Standard was approved by CEN on 25 September 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1863-1:2011: ESIST EN 1863-1:2012
Alternative method for the measurement of roller wave distortion . 29A.1 Apparatus . 29A.2 Method . 29A.3 Limitations . 30A.4 Alternative use of apparatus . 30 SIST EN 1863-1:2012
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.