EN 14081-4:2005
(Main)Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine Grading -Grading machine settings for machine controlled systems
Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine Grading -Grading machine settings for machine controlled systems
This European Standard gives settings, derived according to the requirements given in EN 14081-2, for various combinations of strength classes or grades, grading machines and species from particular sources of growth. These settings are only applicable to timber from the sources indicated in the tables.
Settings for other grades, species or grading machines shall be added when the relevant information is sent to, and assessed by, CEN/TC 124.
Holzbauwerke - Nach Festigkeit sortiertes Bauholz für tragende Zwecke mit rechteckigem Querschnitt - Teil 4: Maschinelle Sortierung - Einstellungen von Sortiermaschinen für maschinenkontrollierte Systeme
Diese Europäische Norm enthält Einstellungen in Übereinstimmung mit den in EN 14081-2 festgelegten Anforderungen für verschiedene Kombinationen von Festigkeitsklassen oder Sortierklassen, für verschiedene Sortiermaschinen und verschiedene Holzarten unterschiedlicher Herkunft. Diese Einstellungen beziehen sich nur auf Bauholz der in den Tabellen angegebenen Herkunftsländer.
Structures en bois - Bois de structure de section rectangulaire classé selon la résistance - Partie 4: Classement par machine - Réglages pour les systèmes de contrôle par machine
La présente Norme européenne donne les réglages, obtenus conformément aux exigences de l’EN 14081-2, relatifs aux différentes combinaisons de classes ou catégories de résistance, aux machines de classement et aux essences issues de différentes sources. Ces réglages ne sont applicables qu'aux bois provenant des sources indiquées dans les tableaux.
Lesene konstrukcije - Razvrščanje konstrukcijskega lesa s fazonskimi kosi po trdnosti - 4. del: Strojno razvrščanje - Razvrščanje nastavitev strojev za strojno kontrolirane sisteme
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Holzbauwerke - Nach Festigkeit sortiertes Bauholz für tragende Zwecke mit rechteckigem Querschnitt - Teil 4: Maschinelle Sortierung - Einstellungen von Sortiermaschinen für maschinenkontrollierte SystemeStructures en bois - Bois de structure de section rectangulaire classé selon la résistance - Partie 4: Classement par machine - Réglages pour les systemes de contrôle par machineTimber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine Grading -Grading machine settings for machine controlled systems91.080.20Lesene konstrukcijeTimber structures79.040Les, hlodovina in žagan lesWood, sawlogs and sawn timberICS:Ta slovenski standard je istoveten z:EN 14081-4:2005SIST EN 14081-4:2006en01-maj-2006SIST EN 14081-4:2006SLOVENSKI
STANDARD
SIST EN 14081-4:2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14081-4November 2005ICS 79.040; 79.120.10 English VersionTimber structures - Strength graded structural timber withrectangular cross section - Part 4: Machine Grading -Gradingmachine settings for machine controlled systemsStructures en bois - Bois de structure de sectionrectangulaire classé selon le résistance - Partie 4:Classement par machine - Réglages pour les systèmes decontrôle par machineHolzbauwerke - Nach Festigkeit sortiertes Bauholz fürtragende Zwecke mit rechteckigem Querschnitt - Teil 4:Maschinelle Sortierung - Einstellungen vonSortiermaschinen für maschinenkontrollierte SystemeThis European Standard was approved by CEN on 26 August 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14081-4:2005: ESIST EN 14081-4:2006
EN 14081-4:2005 (E)
2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Symbols.4 5 Settings for timber strength grading machines.5
SIST EN 14081-4:2006
EN 14081-4:2005 (E)
3Foreword This European Standard (EN 14081-4:2005) has been prepared by Technical Committee CEN/TC 124 “Timber structures”, the secretariat of which is held by SFS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by August 2007. Other parts of this European Standard are EN 14081-1, Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements EN 14081-2, Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine Grading - Additional requirements for initial type testing EN 14081-3, Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine Grading - Additional requirements for factory production control According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Cze
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.