iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12561-3:2011/AC:2014

(Corrigendum)

Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure

Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure

CEN/TC 256 - Deletion of a superfluous clause in the document in all three langauge versions. No xml version as the mother version EN 12561-3:2011 is not available as xml.

Bahnanwendungen - Kesselwagen - Teil 3: Untenliegende Füll- und Entleereinrichtungen für unter Druck verflüssigte Gase

Applications ferroviaires - Wagons citernes - Partie 3: Dispositifs de remplissage et de vidange par le bas pour gaz liquéfiés sous pression

Železniške naprave - Vagoni-cisterne - 3. del: Naprave, ki so nameščene na dnu cisterne ter so namenjene za polnjenje in praznjenje utekočinjenih plinov pod tlakom

General Information

Status
Published
Publication Date
18-Nov-2014
ICS
13.300 - Protection against dangerous goods
45.060.20 - Trailing stock
Technical Committee
CEN/TC 256 - Railway applications
Drafting Committee
CEN/TC 256/WG 20 - Tank Wagons
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
19-Nov-2014
Completion Date
19-Nov-2014
Ref Project
SIST EN 12561-3:2011/AC:2015 - Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure

Relations

Corrects
EN 12561-3:2011 - Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure
Effective Date
05-Nov-2014

Buy Standard

EN 12561-3:2011/AC:2015EN 12561-3:2011/AC:2015
PreviousNext
Corrigendum
EN 12561-3:2011/AC:2015
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.WODNRPBahnanwendungen - Kesselwagen - Teil 3: Untenliegende Füll- und Entleereinrichtungen für unter Druck verflüssigte GaseApplications ferroviaires - Wagons citernes - Partie 3: Dispositifs de remplissage et de vidange par le bas pour gaz liquéfiés sous pressionRailway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure45.060.20Železniški vagoniTrailing stock13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 12561-3:2011/AC:2014SIST EN 12561-3:2011/AC:2015en,fr,de01-februar-2015SIST EN 12561-3:2011/AC:2015SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12561-3:2011/AC
November 2014
Novembre 2014
November 2014 ICS 13.300; 45.060.20 English version Version Française Deutsche Fassung
Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure
Applications ferroviaires - Wagons citernes - Partie 3: Dispositifs de remplissage et de vidange par le bas pour gaz liquéfiés sous pression
Bahnanwendungen - Kesselwagen - Teil 3: Untenliegende Füll- und Entle
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12561-4:2011(Main)
Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products
SIST EN 12561-4:2011

This European Standard is applicable to top devices of tank wagons used for liquid substances of RID carried in the liquid state and able to be top filled and emptied. Safety functions of these devices are subject to RID requirements and not described in this document.
This European Standard specifies the type of equipment which is fitted on the top of such tank wagons and the important dimensions for their connections.
This European Standard applies to new tank wagons built after the 1st January 2010.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12561-3:2011(Main)
Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure
SIST EN 12561-3:2011

This European Standard specifies requirements on and characteristics of bottom filling and emptying devices on tank wagons used for the carriage of gases liquefied under pressure having a test pressure up to 2,9 MPa. This European Standard specifies the important dimensions and arrangements for the filling and emptying connections. Safety functions of these devices are subject to RID requirements and not described in this document.
This European Standard applies to new tank wagons built after the 1st January 2010.
NOTE   It is intended to include quick couplings in a future revision of this European Standard.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12561-6:2011(Main)
Railway applications - Tank wagons - Part 6: Manholes
SIST EN 12561-6:2011

This European Standard applies to manholes on tank wagons used for the transport of dangerous substances. Safety functions of these devices are subject to RID requirements and not described in this document.
This European Standard specifies the dimensions for the interchangeability of seals and other wearing parts and defines also the important dimensions for:
- manholes for gas tank wagons located in one end of the tank;
- manholes for gas tank wagons located on the top of the tank including the arrangement of fittings;
- bolted manholes for tank wagons for liquid substances located on the top of the tank;
- swing bolt manholes for tank wagons for liquid substances located on the top of the tank.
Quick closing/opening manholes are permitted but are not covered by this European Standard.
This European Standard applies to new tank wagons built after the 1st January 2010.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12561-1:2011(Main)
Railway applications - Tank wagons - Part 1: Identification plates for tank wagons for the carriage of dangerous goods
SIST EN 12561-1:2011

This European Standard lays down the identification plates for tank wagons used for the carriage of:
- liquefied gases of class 2 of RID,
- substances of classes 3, 4.1, 4.2, 4.3, 5.1, 5.2, 6.1, 6.2, 8 and 9 of RID.
Compressed gases have not been considered in this European Standard.
This European Standard also defines the dimensions and the fixing of identification plates and various particulars to be marked on them.
The requirements of RID shall override conflicting requirements of this European Standard.
This European Standard applies to new tank wagons built after the 1st January 2010.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12561-2:2011(Main)
Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return
SIST EN 12561-2:2011

This European Standard specifies requirements on and characteristics of bottom emptying devices on tank wagons used for the carriage of liquid substances of RID. This European Standard specifies the most important dimensions of connection devices for the emptying of the tank. Safety functions of these devices are subject to RID requirements and not described in this document.
This European Standard is applicable to bottom vapour return devices where fitted to tank wagons.
This European standard applies to new tank wagons built after the 1st January 2010.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12561-5:2011(Main)
Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products
SIST EN 12561-5:2011

This European Standard specifies the requirements on and characteristics of top devices of tank wagons fitted for bottom emptying only and filling through the manhole and used for liquid substances of RID. Safety functions of these devices are subject to RID requirements and not described in this document.
This European Standard specifies in particular the important dimensions and arrangements for the connections of such tank wagons.
This European Standard applies to new tank wagons built after the 1st January 2010.
NOTE   To take account of the loading gauge restrictions within Great Britain this European Standard does not apply to tank wagons operating exclusively therein.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12561-4:2011(Main)
Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products
SIST EN 12561-4:2011

This European Standard is applicable to top devices of tank wagons used for liquid substances of RID carried in the liquid state and able to be top filled and emptied. Safety functions of these devices are subject to RID requirements and not described in this document.
This European Standard specifies the type of equipment which is fitted on the top of such tank wagons and the important dimensions for their connections.
This European Standard applies to new tank wagons built after the 1st January 2010.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12561-5:2011(Main)
Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products
SIST EN 12561-5:2011

This European Standard specifies the requirements on and characteristics of top devices of tank wagons fitted for bottom emptying only and filling through the manhole and used for liquid substances of RID. Safety functions of these devices are subject to RID requirements and not described in this document.
This European Standard specifies in particular the important dimensions and arrangements for the connections of such tank wagons.
This European Standard applies to new tank wagons built after the 1st January 2010.
NOTE   To take account of the loading gauge restrictions within Great Britain this European Standard does not apply to tank wagons operating exclusively therein.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12561-1:2011(Main)
Railway applications - Tank wagons - Part 1: Identification plates for tank wagons for the carriage of dangerous goods
SIST EN 12561-1:2011

This European Standard lays down the identification plates for tank wagons used for the carriage of:
- liquefied gases of class 2 of RID,
- substances of classes 3, 4.1, 4.2, 4.3, 5.1, 5.2, 6.1, 6.2, 8 and 9 of RID.
Compressed gases have not been considered in this European Standard.
This European Standard also defines the dimensions and the fixing of identification plates and various particulars to be marked on them.
The requirements of RID shall override conflicting requirements of this European Standard.
This European Standard applies to new tank wagons built after the 1st January 2010.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12561-3:2011(Main)
Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure
SIST EN 12561-3:2011

This European Standard specifies requirements on and characteristics of bottom filling and emptying devices on tank wagons used for the carriage of gases liquefied under pressure having a test pressure up to 2,9 MPa. This European Standard specifies the important dimensions and arrangements for the filling and emptying connections. Safety functions of these devices are subject to RID requirements and not described in this document.
This European Standard applies to new tank wagons built after the 1st January 2010.
NOTE   It is intended to include quick couplings in a future revision of this European Standard.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day