EN 12653:1999/A1:2004

SLOVENSKI STANDARD
01-marec-2005
Stroji za izdelavo obutve ter izdelkov iz usnja in njegovih imitacij – Žebljalniki –
Varnostne zahteve
Footwear, leather and imitation leather manufacturing machines - Nailing machines -
Safety requirements
Maschinen zur Herstellung von Schuhen, Leder und Kunstleder - Nagelmaschinen -
Sicherheitsanforderungen
Machines pour la fabrication de chaussures et articles en cuir et en matériaux similaires -
Machines a clouer - Exigences de sécurité
Ta slovenski standard je istoveten z: EN 12653:1999/A1:2004
ICS:
61.060 Obuvala Footwear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 12653:1999/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2004
ICS 61.060
English version
Footwear, leather and imitation leather manufacturing machines
- Nailing machines - Safety requirements
Machines pour la fabrication de chaussures et articles en Maschinen für die Herstellung von Schuhen aus Leder und
cuir et en matériaux similaires - Machines à clouer - Kunstleder - Nagelmaschinen - Sicherheitsanforderungen
Exigences de sécurité
This amendment A1 modifies the European Standard EN 12653:1999; it was approved by CEN on 23 August 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12653:1999/A1:2004: E
worldwide for CEN national Members.

Foreword
This document (EN 12653:1999/A1:2004) has been prepared by Technical Committee CEN/TC 201 “Leather
and imitation leather goods and footwear manufacturing machinery - Safety”, the secretariat of which is held
by UNI.
This Amendment to the European Standard EN 12653:1999 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by April 2005, and conflicting national
standards shall be withdrawn at the latest by April 2005.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative annex ZA of EN 12653:1999.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
Annex C
(normative)
Noise test code for nailing machines
C.1 Scope
This noise test code complements EN 12545:2000 for the determination and declaration of the noise emission
from nailing machines. EN 12545:2000 and this annex shall always be used jointly.
C.2 Normative references
The following referenced documents are indispensable for the application of this document For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

EN 12545:2000, Footwear, leather and imitation leather goods manufacturing machines - Noise test code -
Common requirements clause 2.
C.3 Definitions
C.3.1 Test material
A material of specified construction, incorporating, where applicable, tacks of a specified material number and
length.
C.3.2 Test workpiece
A shoe heel of specified material and an insole.
C.3.3 Test cycle
A specified number of heel nailing operations within a specified noise measurement time period.
C.4 Description of machinery family
As defined in 1.1.
C.5 Determination of the 'A'-weighted sound power level
C.5.1 General
See EN 12545:2000, clause 5.
C.5.2 Measurement procedure
The machine shall be operated three times through its test cycle. The arithmetic mean of the three values of
the A-weighted sound power level in dB shall be calculated, recorded and reported.
Where any microphone position is obstructed by the standing operator, that position shall be excluded from
the test.
C.6 Determination of A-weighted emission sound pressure level at the workstation
C.6.1 General
See EN 12545:2000, clause 6 and the following.
C.6.2 Position o
...