iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 10250-4:1999

(Main)

Open die steel forgings for general engineering purposes - Part 4: Stainless steels

Open die steel forgings for general engineering purposes - Part 4: Stainless steels

This Part of this European Standard specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from stainless steels with ferritic, martensitic, austenitic and austenitic-ferritic structures. Note: The majority of steels listed in this Part of EN 10250 are identical to steels specified EN 10088-3 and more extensive information on properties is given in that European Standard. General information on technical delivery conditions is given in EN 10021.

Freiformschmiedestücke aus Stahl für allgemeine Verwendung - Teil 4: Nichtrostende Stähle

Dieser Teil dieser Europäischen Norm legt die ¬¬technischen Lieferbedingungen für Freiform¬schmiedestücke, geschmiedete Stäbe sowie vorgeschmiedete und in Ringwalzwerken fertig¬umgeformte Erzeugnisse fest, die aus nichtrostenden Stählen mit ferritischem, martensiti¬schem, austenitischem oder austenitisch-ferritischem Gefüge gefertigt werden.
ANMERKUNG: Die meisten Stähle, die in diesem Teil der EN 10250 aufgeführt sind, sind  mit Stählen identisch, die in EN 10088-3 festgelegt sind. Umfassende An¬gaben über deren Eigenschaften werden in jener Europäischen Norm gemacht.
Allgemeine Angaben über die technischen Lieferbedingungen enthält EN 10021.

Pièces forgées en acier pour usage général - Partie 4: Aciers inoxydables

La présente partie de la norme européenne spécifie les conditions techniques de livraison des pièces obtenues par forgeage libre, des barres forgées et des produits préforgés et finis par laminage circulaire, fabriqués en aciers inoxydable à structure ferritique, martensitique, austénitique et austéno-ferrit. NOTE: La plupart des aciers énumérés dans la présente partie de l'EN 10250 sont identiques à ceux qui sont spécifiés dans l'EN 10088-3 et des informations plus complétes quant aux caractéristiques de ces aciers sont fournies dans cette norme européenne.

Prosto kovani jekleni izkovki za splošno tehnično uporabo - 4. del: Nerjavna jekla

General Information

Status
Withdrawn
Publication Date
19-Oct-1999
Withdrawal Date
18-May-2021
ICS
77.140.20 - Stainless steels
77.140.85 - Iron and steel forgings
Technical Committee
ECISS/TC 111 - Steel castings and forgings
Drafting Committee
ECISS/TC 28 - Steel forgings
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
19-May-2021
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/005 - Mandate to CEN/ECISS concerning standardization in the iron and steel sector
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
SIST EN 10250-4:2000 - Open die steel forgings for general engineering purposes - Part 4: Stainless steels

Relations

Replaced By
EN 10250-4:2021 - Open die steel forgings for general engineering purposes - Part 4: Stainless steels
Effective Date
08-Jun-2022

Buy Standard

EN 10250-4:2000EN 10250-4:2000
PreviousNext
Standard
EN 10250-4:2000
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Freiformschmiedestücke aus Stahl für allgemeine Verwendung - Teil 4: Nichtrostende StählePieces forgées en acier pour usage général - Partie 4: Aciers inoxydablesOpen die steel forgings for general engineering purposes - Part 4: Stainless steels77.140.85Železni in jekleni kovani izdelkiIron and steel forgings77.140.20Visokokakovostna jeklaStainless steelsICS:Ta slovenski standard je istoveten z:EN 10250-4:1999SIST EN 10250-4:2000en01-nove
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 10250-3:2022(Main)
Open die steel forgings for general engineering purposes - Part 3: Alloy special steels
SIST EN 10250-3:2022

This document specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from alloy special steel and supplied in the quenched and tempered condition.
The majority of steels listed in this document are identical to steels specified in EN ISO 683-1 and EN ISO 683-2 and more extensive information on hardenability and technological properties is given in these standards.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10250-4:2021(Main)
Open die steel forgings for general engineering purposes - Part 4: Stainless steels
SIST EN 10250-4:2021

This document specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from stainless steels with ferritic, martensitic, austenitic and austenitic-ferritic structures.
NOTE The majority of steels listed in this part of EN 10250 are identical to steels specified EN 10088-3 and EN 10028-7, and more extensive information on properties is given in these European Standards.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10250-3:2022(Main)
Open die steel forgings for general engineering purposes - Part 3: Alloy special steels
SIST EN 10250-3:2022

This document specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from alloy special steel and supplied in the quenched and tempered condition.
The majority of steels listed in this document are identical to steels specified in EN ISO 683-1 and EN ISO 683-2 and more extensive information on hardenability and technological properties is given in these standards.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10250-4:2021(Main)
Open die steel forgings for general engineering purposes - Part 4: Stainless steels
SIST EN 10250-4:2021

This document specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from stainless steels with ferritic, martensitic, austenitic and austenitic-ferritic structures.
NOTE The majority of steels listed in this part of EN 10250 are identical to steels specified EN 10088-3 and EN 10028-7, and more extensive information on properties is given in these European Standards.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12299:2024(Main)
Railway applications - Ride comfort for passengers - Measurement and evaluation
SIST EN 12299:2024

The purpose of this document is to provide methods for quantifying the ride comfort of a passenger in a rail vehicle in response to the track sections it is operated over.
The methods aim to quantify the effects of vehicle body motions on ride comfort and to make the assessment of passenger comfort predictable, repeatable, objective and meaningful.
The methods and comfort scales are validated for people of good health.
This document applies to passengers in rail vehicles operating on heavy rail networks.
This document applies to measurements of motions. It also applies to simulated motions. Guidance is provided on:
-   which method described within the document should be used for different scenarios;
-   typical values for different comfort levels;
-   the application of simulation.
This document excludes health and safety issues, non-passenger carrying vehicles, vehicle homologation and safety, limit values, motion sickness, discomfort caused by accelerating and braking, design guidelines and measurement technology.

  • Draft
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19403-4:2024(Main)
Paints and varnishes - Wettability - Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension (ISO 19403-4:2024)
kSIST FprEN ISO 19403-4:2024

This document specifies a test method to determine the polar and dispersive fractions of the surface tension of liquids from an interfacial tension with optical methods. The method can be applied for the characterization of liquid coating materials, especially if drying effects occur during alternative measurement. If applied to liquids with non-Newtonian flow behaviour (see ISO 3219-1:2021, 3.22), restrictions can apply.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17966:2024(Main)
Fire protection equipment - Carbon dioxide extinguishing systems for use on premises - Design and installation (ISO 6183:2022, modified)
SIST EN 17966:2024

This document specifies requirements and gives recommendations for the design, installation, testing, maintenance and safety of fixed carbon dioxide firefighting systems in buildings, plants or other structures. It is not applicable to extinguishing systems on ships, in aircraft, on vehicles or on mobile fire appliances, or to below ground systems in the mining industry; nor does it apply to carbon dioxide pre-inerting systems.
Design of systems where unclosable opening(s) of the protected volume exceed a specified area and where the opening(s) can be subject to the effect of wind is not specified, although general guidance on the procedure to be followed in such cases is given (see 7.4.3.2).

  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16931-8:2024(Main)
Electronic invoicing - Part 8: Semantic data model of the elements of an e-receipt or a simplified electronic invoice
kSIST FprEN 16931-8:2024

This document establishes a semantic data model of an e-receipt or a simplified electronic invoice.
NOTE   In the remainder of this document, when “e-receipt” is mentioned, “simplified invoice” is also meant.
The semantic model includes essential information elements that an electronic receipt needs to ensure legal (including fiscal) compliance and to enable interoperability for cross-border, cross sector and domestic trade. The semantic model can be used by organizations in the private and the public sector for documenting by issuing a receipt for the purchase of services and /or goods. It can also be used for documenting a purchase between private sector enterprises. In addition, it has been designed for the use of consumers.

  • Draft
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 15235:2024(Main)
Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination (ISO/TR 15235:2001)
kSIST-TP FprCEN ISO/TR 15235:2024

This Technical Report provides information on the effect of water-soluble chloride and sulfate contamination levels on steel surfaces, before the application of paint or related products to surfaces prepared in accordance with standard mechanical or blast-cleaning surface preparation methods.
NOTE The tolerance for water-soluble salt contamination may be different for different paint types.
This information may be used when evaluating the adequacy of surface preparation prior to painting.
This document is concerned only with measured levels of salt contamination based upon either laboratory or field testing. The levels of soluble chloride and sulfate discussed in this document are to be compared using soluble surface densities of the species as determined after extraction in accordance with ISO 8502-6 (the Bresle method), or other methods giving equivalent results. Total soluble-salt contamination may be determined by conductometric testing, but such testing will not determine the nature and concentration of the specific salts present, e.g. whether chloride or sulfate is present, or its concentration.
This document does not define specific levels of cleanliness or methods of salt removal.

  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 509:2024(Main)
Decorative fuel-effect gas appliances
kSIST FprEN 509:2024

This document specifies the requirements and test methods for the construction, safety, and marking of decorative fuel effect gas appliances not exceeding a nominal heat input of 20 kW (based on the net calorific value), thereafter referred to as appliances.
This document is applicable to appliances that are designed to simulate a solid fuel fire and incorporate a natural draught burner with or without an ignition burner, that uses one or more combustible gases of the three gas families at the pressures stated in EN 437:2021. The appliances are for decorative purposes only and are not heating appliances.
This document is applicable to type BAS, as described in 4.2, decorative fuel effect gas appliances that are designed to be installed within a non-combustible builder's opening or a non-combustible fireplace recess.
NOTE 1   This document specifies special national conditions in Annex C for appliances of category I2E+, marketed in Belgium.
NOTE 2   This document specifies special A-deviations in Annex D for appliances in Switzerland which require additional requirements for subclauses 6.6 and 6.7.
This document includes additional requirements for Type BBS appliances which are specified in Annex F.
In addition, this document is applicable to decorative fuel-effect gas appliances that are designed to be installed under a non-combustible canopy which is independent or integral with a flue box, for which additional requirements are specified in Annex A.
The use of toxic gases is not covered.
This document is not applicable to:
-   catalytic combustion appliances;
-   appliances in which the supply of combustion air and/or the evacuation of products of combustion is achieved by mechanical means.
NOTE 3   Requirements concerning the rational use of energy have not been included in this document, because the appliances are for decorative purposes.

  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day