EN ISO 16927:2014

SLOVENSKI STANDARD
01-februar-2014
Barve in laki - Ocenjevanje možnosti ponovnega premazovanja utrjenega premaza
z enakim ali drugim premaznim sredstvom (ISO 16927:2014)
Paints and varnishes - Determination of the overcoatability and recoatability of a coating
(ISO 16927:2014)
Beschichtungsstoffe - Prüfung der Überarbeitbarkeit und Überlackierbarkeit einer
Beschichtung (ISO 16927:2014)
Peintures et vernis - Évaluation des possibilités d'application d'une couche
supplémentaire du même produit ou d'un autre produit de peinture (ISO 16927:2014)
Ta slovenski standard je istoveten z: EN ISO 16927:2014
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 16927
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2014
ICS 87.040
English Version
Paints and varnishes - Determination of the overcoatability and
recoatability of a coating (ISO 16927:2014)
Peintures et vernis - Évaluation des possibilités Beschichtungsstoffe - Prüfung der Überarbeitbarkeit und
d'application d'une couche supplémentaire du même Überlackierbarkeit einer Beschichtung (ISO 16927:2014)
produit ou d'un autre produit de peinture (ISO 16927:2014)
This European Standard was approved by CEN on 6 December 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16927:2014 E
worldwide for CEN national Members.

Contents Page
Foreword .3
Foreword
This document (EN ISO 16927:2014) has been prepared by Technical Committee ISO/TC 35 “Paints and
varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2014, and conflicting national standards shall be withdrawn at the
latest by July 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 16927:2014 has been approved by CEN as EN ISO 16927:2014 without any modification.

INTERNATIONAL ISO
STANDARD 16927
First edition
2014-02-01
Paints and varnishes — Determination
of the overcoatability and
recoatability of a coating
Peintures et vernis — Évaluation des possibilités d’application d’une
couche supplémentaire du même produit ou d’un autre produit de
peinture
Reference number
ISO 16927:2014(E)
©
ISO 2014
ISO 16927:2014(E)
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

ISO 16927:2014(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Sampling . 2
5 Preparation of test coatings . 2
6 Preparation of test . 2
7 Procedure and evaluation . 2
7.1 Application of the coating material . 2
7.2 Observations during recoating . . 2
7.3 Tests after drying/hardening or stoving . 2
7.4 Evaluation . 3
8 Test report . 3
Bibliography . 4
ISO 16927:2014(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for
...