EN 12493:2013/FprA1
(Amendment)LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
This European Standard specifies minimum requirements for materials, design, construction and workmanship procedures, and tests for welded LPG road tanker pressure vessels and their welded attachments manufactured from carbon, carbon/manganese and micro alloy steels.
There is no upper size limit as this is determined by the gross vehicle weight limitation.
This European Standard does not cover pressure vessels for pressure vessel containers.
NOTE 1 In the context of this standard the term "road tanker" is understood to mean “fixed tanks” and “demountable tanks” as defined in ADR.
NOTE 2 The equipment for the pressure vessels and the inspection and testing after assembly is covered by EN 12252, and EN 14334, respectively.
NOTE 3 The design type of the road tanker is subject to approval by the competent authority, as required by ADR.
Flüssiggas-Geräte und Ausrüstungsteile - Geschweißte Druckbehälter aus Stahl für Straßentankfahrzeuge für Flüssiggas (LPG) - Auslegung und Herstellung
Équipements pour GPL et leurs accessoires - Réservoirs sous pression en acier soudés des camions-citernes pour GPL - Conception et construction
Oprema in pribor za utekočinjeni naftni plin (UNP) - Varjene jeklene tlačne posode cestnih cistern za utekočinjeni naftni plin (UNP) - Konstruiranje in izdelava - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2014
2SUHPDLQSULERU]DXWHNRþLQMHQLQDIWQLSOLQ 813 9DUMHQHMHNOHQHWODþQHSRVRGH
FHVWQLKFLVWHUQ]DXWHNRþLQMHQLQDIWQLSOLQ 813 .RQVWUXLUDQMHLQL]GHODYD
'RSROQLOR$
LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers -
Design and manufacture
Flüssiggas-Geräte und Ausrüstungsteile - Geschweißte Druckbehälter aus Stahl für
Straßentankfahrzeuge für Flüssiggas (LPG) - Auslegung und Herstellung
Équipements pour GPL et leurs accessoires - Réservoirs sous pression en acier soudés
des camions-citernes pour GPL - Conception et construction
Ta slovenski standard je istoveten z: EN 12493:2013/FprA1
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
FINAL DRAFT
EN 12493:2013
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
January 2014
ICS 23.020.30
English Version
LPG equipment and accessories - Welded steel pressure
vessels for LPG road tankers - Design and manufacture
Équipements pour GPL et leurs accessoires - Réservoirs Flüssiggas-Geräte und Ausrüstungsteile - Geschweißte
sous pression en acier soudés des camions-citernes pour Druckbehälter aus Stahl für Straßentankfahrzeuge für
GPL - Conception et construction Flüssiggas (LPG) - Auslegung und Herstellung
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 286.
This draft amendment A1, if approved, will modify the European Standard EN 12493:2013. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.