EN 1396:1996
(Main)Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
This European Standard specifies the particular requirements for wrought aluminium and aluminium alloys in the form of coil coated sheet and strip for general applications. This product is generally supplied in thicknesses up to 2,0 mm but thicknesses up to 3,0 mm are also available. It applies to cold-rolled aluminium and aluminium alloy strip coated by the coil coating process, either in the final width or slit afterwards, and to sheet obtained from such strip. It does not apply to coil coated sheet and strip used for special applications such as cans, closures and lids which are dealt with in separate EN 541.
Aluminium und Aluminiumlegierungen - Bandbeschichtete Bleche und Bänder für allgemeine Anwendungen - Spezifikationen
Diese Europäische Norm legt die besonderen Anforderungen für bandbeschichtete Bleche und Bänder aus Aluminium und Aluminiumlegierungen für allgemeine Anwendungen fest, mit einer typischen Dicke bis zu 2,0 mm (Dicken bis 3,0 mm sind lieferbar). Sie gilt für kaltgewalzte Bänder aus Aluminium und Aluminiumlegierungen, die durch ein Bandbeschichtungsverfahren beschichtet, in Endbreite oder nach der Beschichtung längsgeteilt werden, bzw. für Bleche die aus diesen Bändern hergestellt werden.
Aluminium et alliages d'aluminium - Tôles et bandes revêtues en bobine pour applications générales - Spécifications
La présente norme européenne spécifie les exigences particulières relatives aux tôles et bandes en aluminium et alliages d'aluminium corroyés prérevêtues en bobine pour applications générales, d'épaisseur typique allant jusqu'à 2,0 mm (des épaisseurs jusqu'à 3,0 mm sont disponibles). Elle s'applique aux bandes en aluminium et alliages d'aluminium laminées à froid, prérevêtues en largeur finale par le procédé de revêtement en bobine ou refendues après revêtement, ainsi qu'aux tôles obtenues à partir de ces bandes.
Aluminij in aluminijeve zlitine - Prevlečena ali premazana pločevina in trakovi za splošno uporabo - Specifikacije
General Information
- Status
- Withdrawn
- Publication Date
- 19-Nov-1996
- Withdrawal Date
- 23-Jan-2007
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 7 - Sheets, strips and plates
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 24-Jan-2007
- Completion Date
- 24-Jan-2007
- Directive
- 89/106/EEC - Construction products
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 1396:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications". This standard covers: This European Standard specifies the particular requirements for wrought aluminium and aluminium alloys in the form of coil coated sheet and strip for general applications. This product is generally supplied in thicknesses up to 2,0 mm but thicknesses up to 3,0 mm are also available. It applies to cold-rolled aluminium and aluminium alloy strip coated by the coil coating process, either in the final width or slit afterwards, and to sheet obtained from such strip. It does not apply to coil coated sheet and strip used for special applications such as cans, closures and lids which are dealt with in separate EN 541.
This European Standard specifies the particular requirements for wrought aluminium and aluminium alloys in the form of coil coated sheet and strip for general applications. This product is generally supplied in thicknesses up to 2,0 mm but thicknesses up to 3,0 mm are also available. It applies to cold-rolled aluminium and aluminium alloy strip coated by the coil coating process, either in the final width or slit afterwards, and to sheet obtained from such strip. It does not apply to coil coated sheet and strip used for special applications such as cans, closures and lids which are dealt with in separate EN 541.
EN 1396:1996 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1396:1996 has the following relationships with other standards: It is inter standard links to EN 1396:2007, EN 13964:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1396:1996 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC, 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1396:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium und Aluminiumlegierungen - Bandbeschichtete Bleche und Bänder für allgemeine Anwendungen - SpezifikationenAluminium et alliages d'aluminium - Tôles et bandes revetues en bobine pour applications générales - SpécificationsAluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications77.150.10Aluminijski izdelkiAluminium productsICS:Ta slovenski standard je istoveten z:EN 1396:1996SIST EN 1396:1998en01-april-1998SIST EN 1396:1998SLOVENSK
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...